Your cart is empty.
Your cart is empty.Product Description
Bnell floor transition strips are available in various sizes, 5mm, 7mm, 10mm. Suitable for your various tiles, wood floors, vinyl floors, etc..The floor edging trim strip is beneficial to protect children or the elderly not to tripping.
The products are made of high-grade PVC materials.And this floor edging trim come with super sticky self-adhesive tape.It can keep you sticky for a long time.
Peel and Stick Design ：
Suitable peel and stick trim for thresholds, carpet edges, thin floors, backsplash tile edge and anywhere you can think of.The height difference between the floor is measured, and the appropriate size is selected.
Product Specifications:
This product comes in four colors: Gray wood grain, Walnut Grain, Red teak wood grain, and Yellow oak grain. Choose according to your floor color
Three sizes, 5mm, 7mm, 10mm. Choose the appropriate size according to the thickness of the floor.
Installation Steps
Simple to Use : this vinyl floor transition strip can be easily installed by tearing off the protective film on the back of tape. It can be cut to your desired length at random and can work well after installation.
Warm Tips : Please make sure the floor is clean and dry (no water) before installation for best use. In addition, the self-adhesive floor transition strip may be squeezed and bent during transportation, please use a hair dryer to heat it to restore the flatness, and the bonding effect will be better
DK
Reviewed in the United States on January 22, 2025
Fairly easy to install and hopefully will last longer than the hard, wood pieces I had. The color is more red than I expected.
Brian W.
Reviewed in the United States on September 13, 2024
The media could not be loaded.
Customer
Reviewed in the United States on August 1, 2024
My flooring in one room is slightly higher than the floor in the adjacent room and this makes the transition look very professional. The gray color matches my flooring perfectly. It’s easy to walk over, no danger of tripping. It’s easy to roll a chair over or laundry hamper that’s on wheels etc. It only takes a couple minutes to install. It’s easy to cut to the perfect size. I used caulk to seal the top part of the strip to the floor so it couldn’t flap up and be a tripping hazard and so dirt and dust couldn’t get under. It looks professional. It’s been 6 months since I installed it and it looks the same as day one so I’m very happy.
PamGator
Reviewed in the United States on July 21, 2024
Easy to use. Adhesive very strong. Used to replace all our gold thresholds. Looks good.
dachko valkov
Reviewed in the United States on December 23, 2024
I live in a condo in the desert. My laundry room and an extra storage are outside on my patio. The doors are shorter, and I bought this to fill the gap…… two years later, still stay in place….. love it ❤️
BeeNerdy
Reviewed in the United States on October 7, 2024
I was very surprised how well this product worked to solve an issue that I had. We installed flooring in our 1900's built home and the variance from one flooring and the newly installed flooring was too large for a flat transition. I didn't want to mess with trying to match stain to 2 different types of flooring and I didn't want to MacGyver a piece of aluminum trim there either so I was at a loss for what to do. Randomly stumbled upon these PVC transition strips and thought it was worth a try (if it worked). To my surprise it matched very well to the new flooring and the down-step sizing was accurate and fit well to the floor.Now to the caveat... The adhesive is a little meh tbh. I followed the instructions that were provided on how to get the best adhesion, and I cleaned the area prior to putting the transition strip down. Most held well, but the ends both curled a little which put enough resistance to the adhesive that it didn't hold well on either end. This isn't the end of the world, as I can easily nail down the ends, but that doesn't change the fact that the glue failed and both ends of this strip were warped. I was able to cut most of the warp off of one of the sides, but there wasn't enough strip left for the opening to cut off any more from the other.Small criticisms for an altogether nice product that I am glad I stumbled across. Would buy this again for other area's of the house if needed, as it worked well enough that the project was made much easier, even if I do have to nail down the ends.
Mako
Reviewed in the United States on October 2, 2024
There perfect amount of rise I need to join hardwood floors to bathroom tiles. Really easy to trim and install. I used wood glue underneath to ensure it doesn’t peel. Four weeks in, no issues.
Barry Sebastian
Reviewed in the United States on January 5, 2024
Bought this for my 90 yr old mother’s living room rug. She just got a walker, and ran into a problem with the walker’s rear stops (wheels at front, stops at rear for stability) catching on the edge of her 6x9’ rug. Don’t want a fall!… So, researched threshold options, and since she has hardwood, we didn’t want to be nailing into the wood - so opted for an adhesive mount. The key IMO is to heat the strip prior to placing. I used a hair dryer on hi heat for about 5 mins… the strip softens, and when positioning, trying to apply vertically at 90 degrees, the glue edge holds well (press firmly onto the floor, while still warm). Also, try to clean/dry the floor surface real well, prior to installing. It’s been on for a month now, with no problems. Long term, … we’ll see!
Recommended Products