Shopping Cart

Your cart is empty.

Your cart is empty.

Supplying Demand W10190965 W10190966 Refrigerator Ice Maker Assembly Replacement No Bail Arm Model Specific Not Universal

Free shipping on orders over $29.99

$69.49

$ 30 .99 $30.99

In Stock

About this item

  • Please see Model Number fitment information at the bottom of this page before placing your order for this part. Alternate part numbers include WPW10190965, AP6016628, 1471727, 626633, 626661, 626662, PS11749920, W10122506, W10122507, W10122510, W10190969, W10270037, and WPW10190965VP.
  • 115V | 185W | 1.6 Amps | 60Hz | (8) Cube heated mold with flat (4) pin plug | Ice maker only, reuse hardware and bail arm from the old unit | Fits model specific side-by-side refrigerators
  • It is important to disconnect your appliance from the power and water supply before servicing. If your new ice maker is not making ice the freezer temperature may be too high, your water filter may be clogged, your thermostat may be defective, or you may have inadequate water pressure.
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific model. We have included a video in the product gallery to help you find your model number and information in the description below.
  • SD products come in Supplying Demand packaging.



Product Description

SD logo with Ice - Ice Makers

Ice Makers and their harnesses are crucial components in your refrigerator. They come in many different shapes and sizes, and have different specifications depending on the Model they are being installed on!

Know Your Model Number

Watch the video below for more detailed help in locating your model information!

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

A lot of Ice Makers and Harnesses will look the same, but they are both 100% Model Specific and have many different specs - even within the same brand, knowing your exact Model and Serial Numbers is very important!

Inspecting and Testing Faulty Ice Makers

Inspecting Faulty Ice Makers

Inspecting Faulty Ice Makers

Signs of a faulty Refrigerator Ice Maker can include:

  • No Ice Production | Small/Misshapen Ice Cubes | Frequent Ice Jamming | Leaks or Water Dispensing Issues | Noisy Operation | Ice Smells/Tastes Strange | Error Codes/Indicator Lights | Inconsistent Ice Production | Freezing Water in the Ice Maker
Testing Faulty Ice Makers

Testing Faulty Ice Makers

You can test your Refrigerator Ice Maker by:

  • Visual Inspection and Power Check | Water Supply Check | Ice Maker Functions | Thermostat and Heater | Ice Maker Module and Controls | Mechanical Components | Consult the Manual

Testing your Ice Maker explained:

1. Visual Inspection and Power Check - Visual Inspection: Start by visually inspecting the ice maker for any obvious signs of damage, leaks, or loose connections. | Power Check: Ensure the ice maker is properly plugged in and receiving power. Check the power cord and outlet for any issues. Use a multimeter to verify voltage at the ice maker’s electrical connections.

2. Water Supply Check - Water Supply: Confirm that the water supply line is connected and turned on. Disconnect the water line temporarily to check for water flow. | Water Inlet Valve: Test the water inlet valve using a multimeter to check for continuity. If the valve doesn’t have continuity, it may be defective and needs replacement.

3. Ice Maker Functions - Manual Test: Depending on the ice maker model, you may be able to manually initiate an ice-making cycle. Refer to the manufacturer's manual for specific instructions on how to do this. | Observe Operation: During the cycle, observe the ice maker to see if it fills with water, freezes ice cubes, and ejects them into the ice bin. Note any unusual sounds or movements that could indicate a problem.

4. Thermostat and Heater - Thermostat: Test the mold thermostat for continuity using a multimeter. Compare the readings with the manufacturer’s specifications. If the thermostat is faulty, it may not signal the ice maker to start producing ice. | Heater: Check the heater element for continuity and proper operation. The heater ensures that ice cubes release from the mold when ready. Replace it if it’s defective or damaged.

5. Ice Maker Module and Controls - Module Testing: The ice maker module controls the ice-making cycle’s timing and operations. Follow the manufacturer’s instructions to test its functions, such as advancing the cycle manually. | Control Board: Some ice makers have a control board that manages various functions. Test it for proper voltage and functionality using a multimeter.

6. Mechanical Components - Gears and Motors: Inspect gears, motors, and switches for any visible signs of wear or damage. Ensure that all moving parts are functioning correctly without obstruction. | Manual Activation: Manually activate mechanical components to ensure they operate smoothly and perform their intended functions.

7. Consult the Manual and Manufacturer Support - Manual: Always refer to the ice maker’s manual for specific testing procedures and troubleshooting tips. | Manufacturer Support: Contact the manufacturer’s customer support or visit their website for additional assistance, especially if you encounter specific error codes or technical issues.

Different Ice Maker and Harness styles:

Various Ice Maker Styles
Various Ice Maker Harness Styles

Find your Model Specific Ice Maker in our Amazon Storefront today!

SD PREMIUM FOOTER

beachlover
Reviewed in the United States on January 5, 2025
This ice maker fit our Whirlpool side by side refrigerator. Installed easily and works well so far.
Dfnsmn34
Reviewed in the United States on September 5, 2024
Items fit and worked well, then didn't! Less than two month of use it just stopped producing ice. Did some trouble shooting and produced one last after that. Sadly, it's outside the window to return. Water CHECK! Ice formed CHECK! Dispensing NO CHECK! When forced to (by jumper wire) it dispenses, then no more.
Celeste Yebra
Reviewed in the United States on August 15, 2024
Been using it like crazy this summer on 24’ with no issues. Lots of ice. Just make sure that this product is compatible with your fridge.Easy install
Brad Hutchings
Reviewed in the United States on May 7, 2024
With help of YouTube video it was an easy removal and installation of this icemaker, on our Kenmore Cold Spot106.53659300 refrigerator. The icemaker was putting out ice within 2 hours of install. I could have saved a few dollars on the seller but this one felt like it was the best match because I couldn't find a part number for just the icemaker unit. It fit great and only took 5 minutes to reinstall.
Megan Shmigelski
Reviewed in Canada on May 29, 2024
Got to extend the lifespan of my fridge. I love m’y huge ice bucket and am happy I get to stick with it longer.
Kathleen
Reviewed in Canada on March 3, 2024
This was easy to install. It arrived 2 days earlier then expected.The only thing is, some people might need a set of instructions with the ice maker.The thermostat in my ice maker stopped working and this fixed my issue.
Tray
Reviewed in the United States on March 16, 2024
My viking refrigerator unit had corrosion in the ice mold and ice was getting stuck and had debris in the ice it did make. Their unit is used by many many manufacturers with only slight variations. I have replaced many including in stand alone under counter makers. Manufacturers have been using this style unit for decades. If you are a little handy, can and are willing to swap some minor parts this will work for tons of refrigerators models. They shipped fast, it arrived, I swapped the water guide and arm (easy if you take your time) installed in 5 mins and was making ice within two hours. It's been a couple of weeks and I have tons of beautiful ice. In my experience, depending on the devolved soilds in your water, corrosion will cause the ice mold to corrode in 8 to 10 years. You can save yourself heartburn and money by replacing yourself. This unit worked perfectly for me.
Kevin Magee
Reviewed in Canada on February 28, 2024
Fridge was making hollow shells of ice...replaced ice maker...problem not completely solved; ALSO had to replace water inlet valve, which has been Discontinued by Maytag...found suitable replacement part; less than an hour to swap out, 15 year old Fridge now makes ice like it did when it was Brand New...!!!
Alexandria
Reviewed in the United States on November 1, 2024
Replaced my icealwe perfectly on a whirlpool w10213154a
BS
Reviewed in the United States on October 25, 2024
This fit easily into our old refrigerator to be a great, fast, easy replacement~
Customer
Reviewed in Canada on August 24, 2023
Didn't use the wiring harness that was shipped with the unit. The existing harness had the exact same configuration. Simple install, worked right the first time. A full bucker of wonderful hard ice within 24 hours. So much less expensive than having a repair person in or buy a new fridge!
K. McClellan
Reviewed in the United States on June 16, 2023
This replacement ice maker is a money/life saver! I am not particularly savvy with appliance repair, but our original ice maker was leaking water into the pan causing huge lumps of ice. This part fit just right and took about 20 minutes to install from start to finish. It took about 4 hours total for it to start making ice which is normal, and now we don't have to worry about spending hundreds to hire someone to come fix the problem.
andrew
Reviewed in Canada on May 2, 2023
1 year later, it broke down but they got me a replacement. Good service.
Recommended Products

$85.00

$ 35 .99 $35.99

4.5
Select Option