Your cart is empty.
Your cart is empty. Material :
Made of high-quality materials.
No harmful chemicals, safe to use.
Note 1:
Before installing the product, please disconnect the power supply and wear work gloves to protect your hands.
Note 2:
Before purchasing our products, please confirm whether our products are suitable for your refrigerator model.
Package includes:
1 * transmitter board
1 * receiver board
1* Installation instruction
Package parameters:
The products are packed in cartons of 6.42’’*2.48’’*1.30’'.(With installation instructions)
Troon
Reviewed in the United States on February 23, 2025
Easy to install and fixed the problem at a low cost.
Troon
Reviewed in the United States on February 23, 2025
Easy to install and fixed the problem at a low cost.
Terri Mason
Reviewed in the United States on February 13, 2025
Worked perfect! Very simple to replace! Kitchen Aid ice maker in the freezer was over 20 years old!
Terri Mason
Reviewed in the United States on February 13, 2025
Worked perfect! Very simple to replace! Kitchen Aid ice maker in the freezer was over 20 years old!
Szako
Reviewed in the United States on January 18, 2025
We thought we needed a whole new ice maker but this fixed it for a whole lot cheaper.
Szako
Reviewed in the United States on January 18, 2025
We thought we needed a whole new ice maker but this fixed it for a whole lot cheaper.
Junction3
Reviewed in the United States on September 23, 2024
Units fit perfectly and work flawlessly. Ensure replacement matches your old unit numbers before ordering. Super easy to install. Works like original. Great value. Easy DIY.
Junction3
Reviewed in the United States on September 23, 2024
Units fit perfectly and work flawlessly. Ensure replacement matches your old unit numbers before ordering. Super easy to install. Works like original. Great value. Easy DIY.
boicecrane
Reviewed in the United States on March 30, 2024
Our icemaker quit working so I went online and the suggestions were that it was the icemaker, so I replaced that.Still no ice.Next suggestion was the water inlet valve. I ordered the part and changed it.Still no ice.I searched YouTube and found a video suggesting it was this sensor. The video also included a tip that you can take the right hand sensor out of the fridge and jumper across 2 of the pins to make sure that was the problem.I did that and wonder of wonders, fridge started making ice again.The guy in the video mentioned that he had ordered the part off of Amazon at a significant savings.When I researched the part, I discovered he was right, so I verified the part number and ordered this. Works like a charm and I saved about 250 dollars
boicecrane
Reviewed in the United States on March 30, 2024
Our icemaker quit working so I went online and the suggestions were that it was the icemaker, so I replaced that.Still no ice.Next suggestion was the water inlet valve. I ordered the part and changed it.Still no ice.I searched YouTube and found a video suggesting it was this sensor. The video also included a tip that you can take the right hand sensor out of the fridge and jumper across 2 of the pins to make sure that was the problem.I did that and wonder of wonders, fridge started making ice again.The guy in the video mentioned that he had ordered the part off of Amazon at a significant savings.When I researched the part, I discovered he was right, so I verified the part number and ordered this. Works like a charm and I saved about 250 dollars
Ric Far
Reviewed in the United States on December 8, 2024
Installs easily, and worked perfectly for 2 weeks, then quit working as the one it replaced.
Ric Far
Reviewed in the United States on December 8, 2024
Installs easily, and worked perfectly for 2 weeks, then quit working as the one it replaced.
Great product…. Did the job!
Reviewed in Canada on December 7, 2024
Works perfectly.
Great product…. Did the job!
Reviewed in Canada on December 7, 2024
Works perfectly.
Robert Frase
Reviewed in the United States on November 8, 2024
This was the exact part I needed in order to get my ice maker back up and running properly.
Robert Frase
Reviewed in the United States on November 8, 2024
This was the exact part I needed in order to get my ice maker back up and running properly.
Mr. Powell
Reviewed in Canada on November 11, 2024
Installed it properly, everything seemed fine, LED working fine, says the system is all good and nothing happens. Next day, no system LED lights at all. Pull them out, look them over, seem fine so I re install them. System lights back on again, says its all fine. Next day nothing again. Don't know what's going on, it's like the PCB's don't like the cold?
Mr. Powell
Reviewed in Canada on November 11, 2024
Installed it properly, everything seemed fine, LED working fine, says the system is all good and nothing happens. Next day, no system LED lights at all. Pull them out, look them over, seem fine so I re install them. System lights back on again, says its all fine. Next day nothing again. Don't know what's going on, it's like the PCB's don't like the cold?
J. Rich
Reviewed in the United States on December 23, 2022
If you're searching for this product, you likely have an ice maker sensing system that suddenly started blinking the red status LED two times and repeating endlessly, indicating the IR sensing system has failed.I searched for this part and found many options from either parts suppliers or Amazon. The genuine parts are ridiculously expensive so opted to try the knock-off option. When reading many reviews for the Amazon options, I found almost all share one design flaw. The layout of the PCB for the LH (main) sensor has the cylindrical capacitor soldered too close to the edge of the board. This results in an interference with the sliding on / off switch, which is really nothing more than a mechanical sliding plastic piece that blocks the IR beam, resulting in the "OFF" state. If you want a part that fits perfect and does not suffer from this flaw, this is the one to buy. The capacitor on this design is near identical in placement as the OEM (Whirlpool) part. I installed both boards in less than 10 minutes and was back up and running like new. We'll see if the parts last long, but for the price and the perfect fit, so far, I am very pleased. Good luck with your install, this is a very easy one for any DIY'er.
J. Rich
Reviewed in the United States on December 23, 2022
If you're searching for this product, you likely have an ice maker sensing system that suddenly started blinking the red status LED two times and repeating endlessly, indicating the IR sensing system has failed.I searched for this part and found many options from either parts suppliers or Amazon. The genuine parts are ridiculously expensive so opted to try the knock-off option. When reading many reviews for the Amazon options, I found almost all share one design flaw. The layout of the PCB for the LH (main) sensor has the cylindrical capacitor soldered too close to the edge of the board. This results in an interference with the sliding on / off switch, which is really nothing more than a mechanical sliding plastic piece that blocks the IR beam, resulting in the "OFF" state. If you want a part that fits perfect and does not suffer from this flaw, this is the one to buy. The capacitor on this design is near identical in placement as the OEM (Whirlpool) part. I installed both boards in less than 10 minutes and was back up and running like new. We'll see if the parts last long, but for the price and the perfect fit, so far, I am very pleased. Good luck with your install, this is a very easy one for any DIY'er.
Recommended Products
$67.54
$ 26 .99 $26.99