Your cart is empty.
Your cart is empty.4.3 out of 5 stars
- #2,053 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
- #2 in Built In Soap Dispensers
Product Description
OHiHi Upgraded Kitchen Sink Soap Dispenser, Built in Kitchen Sink Soap Dispenser ( Brushed Nickel ),
Countertop Soap Dispenser pump With 47" Extension Tube kit, No Need To Fill The Little Bottle Again （Longer Threaded Shaft）
Are you Looking for a Premium and Long Lasting Kitchen/Bathroom Soap Dispenser?
Are you tired of refilling your kitchen sink little bottle every week?
Are you worrying about the thread of the soap dispenser is too short for your granite countetop?
Using OHiHi finest quality components, each one of soap pumps are made to last
and it’s a great addition to your Kitchen accessories or bathroom accessories.
Specifications:
Extension tube length: 47”
Sink Hole Size Range: 1 inch~1.57 inch
Inner Diameter of the tube: 0.24 inch
Outer Diameter of the tube: 0.35 inch
Material: pump-head(Stainless Steel)+extension tube (silicon)+ check valve (ABS)
Package Contents:
1x Stainless steel soap dispenser pump head
2x extension tubes, total length is 47"
3x bottle stoppers
1x check valve
1x PP ball
2x fastening bolts
How to press the pump head to get the soap out quickly?
Please note normally it will take 30--40 times press when you use this soap dispenser in the first time due to the hose is a little longer.
As to the following press, when you press, do not let the dispenser springback, then wait 1 or 2 seconds and then let go of your hand, the soap will flow upward automatically quickly and you can get more soap too, do not press all the time, press after 1-2 seconds will be easy for the soap flow upon to the pump head.
After these operations done above, if it is still hard to press the soap out, you can add some water into the soap bottle to dilute the concentration of your dish soap, then it will be easy for you to press out the soap, you can try it.
Customer
Reviewed in the United States on March 11, 2025
I ordered this countertop soap dispenser to replace an old one. It is well made and came with plenty of extra parts, enough to fit or work in a number of scenarios, a generous length of tubing and a CHECK valve. This is critical to keep the tubing primed to prevent the soap from sliding back down into the tubing requiring multiple pumps to pull up the soap with each use.I did need to cut the tubing and reposition the check valve higher on the tubing making it closer to the pump and not end up in the half gallon jug of soap underneath the sink. Works great and I am very pleased.
rcjh-ku
Reviewed in the United States on February 6, 2025
Great design to have a long tube to your dish soap bottle instead of having to blindly fill a well mounted under the dispenser. No more overfilling, you can now easily see how much soap is left. Plenty of tubing to your regular soap bottle stored anywhere under your sink. Comes with 3 different fitted drilled stoppers for the soap bottle with tube passing through, to avoid spills. Also a convenient one way valve in the tubing to prevent soap from draining back down the tube. It will take 30 or 40 slow pumps (as recommended in the instructions) to prime on the first use, just have a little patience.
GLO
Reviewed in the United States on February 22, 2025
Easy to install and the dispenser section is really nice. I like that I’m able to use a bigger soap container. Works like a charm 🔥🔥
George guirguis
Reviewed in Egypt on February 18, 2025
كما بالوصف والخامه كويسه
M
Reviewed in the United States on February 13, 2025
Our old name-brand soap pump died. I was hoping to simply replace the pump itself, but that wasn’t possible. So instead, we bought this system.It was easy for two of us to swap out the old pump and bottle for this system. I LOVE that it connects to the big soap bottle, rather than us having to fill something from above (always an adventure, trying not to overfill it). We followed the priming instructions and had it working quite quickly (in part because the soap bottle sits directly underneath the pump).We’ve had it for three weeks and are very happy so far.I will say that it is not as solid as our old system; it is stainless steel in color but I’m pretty sure most of the parts are plastic. Still, if it lasts more than a couple of years, it’s a bargain compared to the expensive name brands.And again, I LOVE that it connects to the full soap bottle, rather than us having to fill something every month or two. That alone makes it worthwhile.
TONY
Reviewed in the United States on January 11, 2025
Felt a little cheap, and nozzle alignment was off slightly, but functions well. Also design is correct with foot valve in line. Made this easy to prime. I would recommend this product.
My Two Bits Worth
Reviewed in the United States on February 21, 2024
This device really sounded good, but operationally, it is greatly lacking and difficult to use.The problem is that the tapered cork that has to fit into the many different sizes of soap bottles, so they give you several to choose from, but at best, it is still problematic. When you are setting it up for the first time and each time you need to replace the bottle of soap, the bottle itself must be cleaned to insure that there is no soap on the inside neck of the bottle or the tapered cork will pop right back out. When you insert the tube into the bottle, if the tube from your prior soap bottle touches the inside neck of the bottle and gets any liquid soap on the bottle, you will have trouble keeping the cork in. Most likely the bottle has a residue of soap on the neck of the bottle from the bottle being tipped over in your shopping cart or grocery bag on the way home, and unless you clean it off so that it is not slippery with soap, the cork will not stay in, it will pop right back out.Save yourself frustrations and don't buy this lousy device as the concept sounds good but you will regret the effort that you will have to expend every time the bottle has to be changed.If you get the cork to stay inserted in the bottle of soap, you will then have to pump the dispenser some 60+ times to get the soap to refill the tubing, and you will wonder if it is even working because it take so many pumps with seemingly nothing happening. If you finally reach this stage, it will work well until the bottle is empty and you have to start the whole process all over again.What I finally dis was to take a long twisty tie wire (very long, or perhaps two or three tied together to make it long enough) like at times come on a bread bag and tightly secure it around the neck of the bottle in the threaded area so that it can't gravitate upward and take the remaining length and angle it up to the top of the cork and tightly wrap it around the cork and twist the ends together to secure it. This should hold the cork in place. After replacing the soap bottle many times I finally tried this method of holding the cork in the bottle. It probably would work to keep the cork in place even without cleaning the inside of the bottle neck from the soap that lubricates the internal edge of the bottle neck. I should have tried this the second time I switched soap bottles!
Customer
Reviewed in Canada on December 31, 2024
I ran across this soap dispenser when I was trying to replace one that "went bad". It was the one with the little bottle that was impossible to get at easily. The concept of this one looked good and it was not expensive so I ordered it. Installed it today and, while the instructions left much to be desired, it was very easy to install, prime and use. I just put the tube into a bottle of dish soap at the bottom of my cupboard. Good product, good price, looks good, and inexpensive. What more could you want.
Elynne Gaffney
Reviewed in the United States on December 25, 2024
Bought this to replace a pricer Kohler soap dispenser that failed after a few years. I absolutely love the idea of pumping the soap straight from the bottle underneath the sink. Installed easily, connect the tube, It took a bit to prime (just be patient, read the directions), although clearly worth it for the added convenience. It came with different stoppers to use, depending on bottle throat size.Seller follow-up and provided information was top-notch. Clear, concise instructions and information on customer support if needed.
Wendy Cook
Reviewed in the United States on December 16, 2024
We bought our house and have so many projects to do that I wanted to do just a couple easy budget friendly things to make the kitchen sink nicer for now in case we want to Spruce it up and splurge later. We got a new faucet on it and decided we didn't need the water wand, so I started to look at options for the hole that was there from it. That's what led me to this.It fit the space perfectly, and now I don't have to have a soap dispenser on the counter for the dawn! It looks good, cleans off easy with the rest of the sink and was easy to install. It took my husband maybe 10 minutes. I like that it came with multiple bottle top options so if we want to change up the container size or something, we're covered. I think it's a pretty good quality item for 20 bucks, and it works just as intended! Happy with it.
Georgina Banks
Reviewed in Australia on July 26, 2023
Great product - love it.
Kaye Thomas
Reviewed in Australia on May 22, 2023
This is the 2nd dispenser we put in. We took out the water filter and put in the soap dispenser. This time we put it into the laundry as we were happy with the 1st one which we put in the kitchen
FPicos
Reviewed in Mexico on February 21, 2022
Todo bien. Es fácil de instalar y práctico.
Recommended Products