Your cart is empty.
Your cart is empty.Product Description
Brooklyn Massive
Reviewed in the United States on March 6, 2025
Good quality. Worked perfect to pull the crank arm on the Peloton.
Luis
Reviewed in the United States on March 5, 2025
Cheap, fit perfect on raceface cranksetEasy to use
Jeff Rake
Reviewed in the United States on March 1, 2025
Replaced the bottom bracket on my Peloton. This tool worked great removing the crank arms.
Eli
Reviewed in the United States on February 25, 2025
Does what it says, pulls cranks. Super intuitive to use and gets the job done. I appreciate how compact the tool is as it doesn’t take up lots of space in my workbench.
Ivy J. Banner
Reviewed in the United States on January 24, 2025
No other tool will place this tool. Works as dined. Handy. Durable.
LG
Reviewed in France on August 1, 2024
Acheter pour bloquer le piston du moteur de mon motoculteur, pour dévisser l'allumage.A faut le job sans problème et sans risque d'abîmer le piston
family_everydaylife
Reviewed in Germany on July 24, 2024
Der Skylety Kurbelabzieher ist ein unentbehrliches Werkzeug für jeden Fahrradliebhaber, der gerne selbst Hand an seinem Rad anlegt. Er ermöglicht das einfache und sichere Entfernen von Fahrradkurbeln, ohne dabei das Innenlager oder die Kurbel selbst zu beschädigen.Einfache Handhabung und robuste KonstruktionDer Kurbelabzieher ist aus hochwertigem Stahl gefertigt und somit äußerst robust und langlebig. Die Handhabung ist denkbar einfach: Der Abzieher wird in die Kurbel geschraubt und mit einem Schraubenschlüssel festgezogen. Durch das Drehen des Abziehers wird die Kurbel vom Innenlager gelöst. Im Lieferumfang sind zwei Adapter enthalten, die für verschiedene Kurbeltypen geeignet sind.Kompakt und leicht zu verstauenDank seiner kompakten Größe und des geringen Gewichts lässt sich der Kurbelabzieher problemlos in der Werkzeugtasche oder im Rucksack verstauen. So ist er immer griffbereit, wenn er benötigt wird.FazitDer Skylety Kurbelabzieher ist ein unverzichtbares Werkzeug für jeden Fahrradliebhaber, der seine Reparaturen selbst durchführen möchte. Er ist einfach zu bedienen, robust und kompakt. Ein kleines Werkzeug, das große Wirkung zeigt.Hinweis: Vor der Verwendung des Kurbelabziehers sollten Sie sicherstellen, dass Sie das richtige Werkzeug für Ihren Kurbeltyp verwenden. Im Zweifelsfall empfiehlt es sich, einen Fachmann zu konsultieren.
J harbin
Reviewed in the United States on December 29, 2024
Completely stripped the threads on the cranks, causing significant unrepairable damage to the bike. Do not buy, save yourself the pain that I’ve experienced!
Bill Lawson
Reviewed in the United States on November 4, 2024
This tool worked great! It came dry so I added a very tiny little bit of oil to both sets of threads. I feel threads like these should be lightly lubricated. Especially when you consider the torque that you're going to be applying. Unscrew the center driver bolt on the tool so that it's even with the inner surface of the outer piece. If you look inside, none of the driver bolt should be past the inner surface. Then screw the outer piece into your crank arm. Making sure not to cross thread it. These are fine threads. Be careful and gentle starting it into the crank arm threads. And make sure you have it threaded correctly before applying any significant force and turning it in very much. Once you're sure it's in the threads right, turn it all of the way into the crank arm. It is important to make sure that the outer piece is all of the way into the crank arm. If you only have it in a couple of turns you could strip out the threads in your crank arm. It's important to have the driver bolt backed out enough so that it doesn't touch anything before the outer piece bottoms out inside the crank arm. Then, once the outer piece is turned all of the way into the crank arm, start turning the driver bolt inside the tool to remove your crank arm. It's almost harder to explain how to use it than to actually use it. I'd buy it again without hesitation. And I'm not getting any form of compensation for this review. It seems very well made to me. It was very simple to use and worked great!
S. D. Caro
Reviewed in the United States on November 28, 2024
This is well built and the outer threads are well formed. The problem lies with the part that is supposed to press the crankset out. The tip has an O.D of 9mm. My vintage Campagnolo (Chorus ?) needed a tip with an O.D. of 8mm. I ended up using a short 8mm x 1.0 screw, threading into the end of the tapered crank spindle, and then using the tool to drive the chain wheel off the spindle. The unit worked perfectly.Overall, its a quality product and should work fine with modern equipment.
Kevin Hibbert
Reviewed in the United Kingdom on April 28, 2024
Perfect item
gianni
Reviewed in Italy on October 2, 2022
ottimo rapporto qualità prezzo, ho estratto le pedivelle senza difficoltà, sembra sufficentemente robusto e duraturo.
juan jose perez
Reviewed in Spain on June 27, 2021
Facil manejo, y robustez de la herramienta. He conseguido sacar unas bielas, gracias al casquillo que ensancha el tornillo de empuje
Recommended Products