Your cart is empty.
Your cart is empty.Product Description
PoE Splitter, the best way to expand you smart home device, simple and cost saving.
Easy to add new device, get rid of cluttered wiring.
With more new devices added, it becomes difficult to manage the wiring. You have to install a lot of independent power adapter to power supply the Non-PoE device. But by using our PoE splitter, you will no longer need to worry about the trouble installation and cost.
The PoE splitter is powered from PoE switch, and it will break the PoE power into power(via power cable) and data(via RJ45 cable), then those Non-PoE device can use it just as PoE device. Only need a network RJ45 cable, can right to the install place, no extra power adaapter ever needed!
POE Splitter
PoE installation is very simple, low cost, not need of extra power adapter, with a lot of advantage but it is just for PoE device. But with the help of our splitter, Non-PoE device can work just as PoE device. And You can easily expand as much device as you want.
Better experience provide by Gigabit PoE splitter
Various port are available for you to choose
DC 5.5*2.1mm port mostly can be used for IP camera, wireless AP, and other device with DC port.
DC 5.5*2.5mm port also support DC 5.5*2.1mm port device, it is more flexible.
Micro USB port can be used for Raspberry Pi 3B and device powered from Micro USB port.
Type-C port, also known as USB-C, can be used for Raspberry Pi 4B and new device powered from Type-C port.
Plug & Play
Our PoE splitter is plug and play design, all you need is directly connect it to your device, and it will work immediately. Very easy to use and no configuration required.
1000Mbps
Most PoE splitter in the market is 100 mbps, sometimes may cause delay. But our PoE splitter is gigabit 1000Mbps, which is 125 MB per seconds, 10 times faster. You will no longer suffer from High Latency| Lagging| Lost Packets, gives you a better experience.
Safe & Stable
Built in advanced chip, offer multiple protection to protect terminal device. Over current, short circuit, over voltage, over power protection.
Wide Applications
Wide range of applications, work with IP camera for family safety, work with new samrt home device for convenience, work with AP for business.
Comply with IEEE802.3af/at standard
Comply with IEEE802.3af/at standard, auto detect then output proper power for device. Friendly for new beginner.
George
Reviewed in the United States on February 22, 2025
Works great powering an Arduino.
J. Laing
Reviewed in the United States on January 24, 2025
I wasn't sure about this product because some of the reviews were poor. I was looking for exactly this (well, either the 2A or the 2.5A version), so I went for it anyway. I've just finished installing it into my ONT cabinet, where I removed the old power cable, and the clumsy power supply it came with. Now my fiber Internet is powered from the UPS in my switch closet, and it's working great at the full advertised speeds (500mbps). My ONT only needs 0.5A (as measured with my clamp-on DC Ammeter), so there should be plenty of margin and this thing should run cool.
Ken Humbertson
Reviewed in the United States on January 21, 2025
Got this so I could use a single cable to a security camera in a location where no power was available. Also avoids needing to use WIFI on the camera, big plus to me.Used with a POE injector at the router end. Works great. cheaper than buying a POE router. If I needed several POE cameras, a POE capable router would be the way to go.
RaysFan65
Reviewed in the United States on January 12, 2025
Work great. It allowed me to remotely provide power for a Temp monitor sensor in one of our data centers using a POE switch.
Mr FHO
Reviewed in France on January 12, 2025
Bien que la connectique alimentation de mon point d'accès wifi ne permet pas de s'en servir "out of the box", ca fonctionne avec un "connecteur bricolé" par mes soins et c'est tout ce qui compte pour moi.
RyuuTokyo
Reviewed in Germany on January 11, 2025
Der Micro USB PoE Splitter ist für mich ein echter Volltreffer. Ich konnte meine alte Tado Bridge ordentlich und ohne viel Kabelsalat unterbringen. Die Lösung war schnell und einfach umzusetzen. Sehr zufrieden!
Bergen
Reviewed in the United Kingdom on September 10, 2024
Used the "Micro USB 2.4A" variant to power and transmit data to a remote access point (over 15m). Works flawlessly and looks tidy too.
Iggyboo
Reviewed in the United States on June 4, 2024
(update Don't trust these things. I gave them another chance and got burned again. It just can't handle 1Gb) I loved this little thing ... for a while. Until I realized that it caused some kind of problem and dropped my 1G connection down to 100Mb. I also had strange disconnects which I can only attribute to this thing having issues. I had the device on the same cable and plugged in with a long extension cord before so I know it's not the device BUT this thing after about 24hrs it starts to have issues. Maybe I have a defective unit and maybe it's something else, but this one device seems to be the only issue in the line. I'll have to look around and see if I can find a different device unfortunately as this one was absolutely PERFECT since it has the barrel connect and ethernet cable all in one. Your mileage may vary but be sure to do a burn in test over before the return window expires.
Carey Bernier
Reviewed in the United States on December 15, 2024
This PoE splitter worked perfectly to create an inexpensive in-wall solution to power an Echo Hub with an existing ethernet cable while still allowing data to pass through to an existing wall port. All in, the total cost was less than $20. The USB-C version of this adapter won't power the Echo Hub since it only puts out 5 volts. The Echo Hub also requires 9 volts with Power Distribution (PD) and Programmable Power Supply (PPS) support. This 12-volt version of the splitter supplies plenty of wattage (24 watts) but doesn't have a USB-C connector with PD and PPS support, so I paired it up with an AITRIP PD65W Fast Charging Type-C USB Module. I couldn't be more pleased with the combination. Both run cool at the 12.5 watts needed for the Echo Hub. This combination is significantly less expensive than buying a PoE to PD3.0/PPS converter like Amazon would have us do for a clean in-wall installation and works great until someone releases a reasonably priced all-in-one adapter. Just be sure you have plenty of space in the box or wall cavity.
JimR
Reviewed in the United States on December 10, 2024
Headline pretty much says it. I never unboxed the wall wart that came with the Home Assistant Green. This PoE splitter does that job.I have another one of these powering my S33 cable modem, and two of a variation of this powering MoCA adapters. Did I mention I hate wall warts? Love these things. Smaller than a wall wart, and puts it on PoE so I can power cycle from the console should I want to, and it's all easily on the network stack UPS. Win-win-win.
James B
Reviewed in Canada on October 24, 2024
I tested one of these units with a Station G2 meshtastic radio and it was able to power the unit in the LV mode (as was expected). My intent is to remotely power (no Ethernet needed) some small ESP32 (type) devices.If I am being completely honest, I cannot think of too many uses for a USB-C PoE splitter which is only able to handle 2.4A at 5v.These are rated to output 2.4A at 5v (only) so they are NOT well suited to the following SBC:Raspberry Pi 4 (3A minimum)Raspberry Pi 5 (5A minimum)
mynameis
Reviewed in the United States on October 21, 2024
This devices works but it will not work for Echo Hub. Read that POE injector and this usb c device would do the trick but it didn’t. For Echo Hub what worked was using Male/Female USB Breakout Board to 4 Pin Screw Terminal Block Connector. I extended the wire between these terminals and used the Echo Hub white cord(usb c). This allowed me to run the extension from the ceiling to the wall mount location. You need to connect all 4 terminals to the extension wire and the Echo hub will power up fine. If you connect only the power terminal on the breakout terminal block, you will get an insufficient power sign on Echo Hub.
Sergio
Reviewed in Italy on October 10, 2024
Ho acquistato diversi splitter REVODATA in base al connettore di uscita (Micro USB, USB-C e 12V), e devo dire che tutti si sono dimostrati perfettamente funzionanti e compatibili con i dispositivi che possiedo. Questi splitter mi hanno permesso di alimentare in modo efficiente vari apparecchi attraverso lo switch PoE integrato nel mio sistema di domotica con Home Assistant. In questo modo, posso accendere e spegnere i dispositivi in base alle automazioni che ho impostato, una soluzione davvero comoda e versatile.Nello specifico, ho utilizzato questo splitter per alimentare una Chromecast (collegata a un adattatore USB-LAN per evitare l'uso del Wi-Fi), un Arduino, e anche un relè che comanda l'accensione di un PC/server. Tutti i dispositivi hanno funzionato senza problemi, dimostrando l'affidabilità del prodotto.L'integrazione con il mio switch PoE da 48V è stata impeccabile, e l'uscita a 5V/3A tramite Micro USB ha fornito un’alimentazione stabile, senza disconnessioni o malfunzionamenti. Questa soluzione è particolarmente utile per chi, come me, vuole centralizzare la gestione energetica di più dispositivi attraverso l'uso di uno switch PoE, eliminando l’ingombro dei caricabatterie tradizionali.In conclusione, il REVODATA PoE Splitter è una soluzione eccellente per alimentare dispositivi con diverse esigenze di connettività, ed è ideale per chi cerca affidabilità e versatilità nel proprio setup domotico.
Recommended Products