Your cart is empty.
Your cart is empty.4.6 out of 5 stars
- #30 in Digital Camera Battery Grips
Note: The camera is NOT included.
VERTICAL BATTERY GRIP:
A handy spare or ideal replacement for Canon EOS 1100D / 1200D / Rebel T3 / Rebel T5 / Rebel T6.
Effectively doubles your shooting time, helps ensure you never run out of power.
Makes smaller cameras easier to hold.
Equipped with an extra shutter button and a connection cable, makes it easier to take a vertical shoot.
Easy to install, just remove the battery door and attach it on the upright portion that slides into the battery compartment of the camera.
Dimensions(approx.): 16 x 13 x 8 cm
Net Weight: 9.50 oz / 269 g
LP-E10 Replacement Battery
No longer run out of battery power when you're just about to capture the perfect moment.
Voltage: 7.2V
Capacity: 1020 mAh
Chemistry: Li-ion
Net Weight: 2.58 oz / 73g
Size: 8.8 x 4.8 x 2.2 cm
Package Contents:
1 x Vertical Battery Grip
1 x Connection Cable
2 x LP-E10 Li-ion Replacement Battery
James
Reviewed in the United States on September 6, 2024
Great for extended battery life for photo shoots!!!
Gabriel
Reviewed in the United States on August 1, 2024
Se ve hermosa la camara asi y es super util este battery grip
courtney ashley
Reviewed in the United States on October 31, 2024
Works great exactly as intended
Phil Dodd
Reviewed in the United Kingdom on July 9, 2023
Great product works well with the cannon 2000D and is well made,
CrazyReader
Reviewed in the United States on February 10, 2023
I had an extra battery so I was okay but one of the batteries will not accept a charge. The grip works like it should but I do need 2 working batteries to operate it.
Christophers Wholesale
Reviewed in the United States on December 25, 2023
Much better than the same co's version for the T2i . The batt handle for the T2 was a polished (slippery) poly-something plastic and became quite brittle within the first year, and the T2 version would not stand up. It would just fall over, ive had it maybe 2 years and all the screws that hols the metal plate to the top of the handle have pretty much stripped out and are held together with super glue - the T2 handle is basically trash at this point due to almost completely being held together with super glue and odd screws. This new T6 version is a matte plastic with a more rugged feel and looks different as well with a textured finish. The biggest difference is the on / off and ext trigger on this model require an external cable from the handle to the camera (not happening) and the switches arent there on this one.The feel alone gives the impression this is a much sturdier unit. I suspect itll last considerably longer than the same brand for the T2
De'Andre
Reviewed in the United States on November 2, 2023
So hard to find a camera grip for my canon rebel t7 great price and comes with 2 batteries the cord that connects from grip to camera is short so it doesn’t get in the way. I love it and it’s also very light weight
Cliente
Reviewed in Italy on February 25, 2022
Allora volevo partire facendo i miei complimenti al corriere che, arrivato davanti a casa, ha suonato e buttato il pacco dal cancello (ci sono circa 60 cm dal buco del cancello al terreno), quando non mi ha dato nemmeno 1 e dico 1 minuto per uscire e aprire.PS: posso capire che non avete tanto tempo e che non esiste solo il mio di ordine da consegnare, ma dentro poteva esserci qualcosa di fragile come ad esempio il battery grip che è tutta plastica in sostanza, MA COMUNQUE È ARRIVATO TUTTO INTEROPassiamo al prodotto……devo dire che è arrivato imbustato molto bene e con ciascun componente ben sigillato, batterie e battery grip. Le batterie Neewer hanno un voltaggio diverso (7.2V contro i 7.4 dalla originale Canon) e pure dei mAh diversi (1020 mAh contro gli 860 della originale) e questo non so se sia un bene. Per i mAh potrebbe andar bene, significa più durata ma per il voltaggio non saprei. In ogni caso le batterie sono IDENTICHE all’originale e non ho trovato nessuna difficoltà ad inserirle nel carrellino. Le ho provate per un po’ di giorni e vanno benissimo e non si scaricano velocemente.Il battery grip è tutto in plastica, si adatta bene alla mia EOS 2000D, la ghiera gira bene e si adatta perfettamente al buco centrale sotto il corpo macchina. Ha comunque un design simile al manico del corpo macchina anche se quest’ultimo in gomma mentre nel battery grip è in plastica ma comunque permette di tenere la macchina ben salda alla mano e in ogni caso ho notato subito un buon grip. Difficilmente vi scivolerà dalla mano. Dietro lato schermo il battery grip l’ho trovato un po’ più semplice come design e dà la sensazione di cheap rispetto alla parte di davanti che comunque riprende il design del corpo macchina. Nella confezione ho trovato anche un cavetto per la predisposizione al tasto di scatto del battery grip, da attivare con l’apposito switch on/off e devo dire che funziona molto bene.CONCLUSIONI: posso dire che ha davvero un ottimo rapporto qualità prezzo, è molto comodo e semplice da montare.Per le batterie ATTENZIONE perché avendo delle caratteristiche diverse non so se possano andar bene oppure no, hanno comunque un voltaggio diverso e funzionano. Si saprà in futuro come e quanto dureranno. Comunque il battery grip super consigliato!
Francisco Oliveira
Reviewed in Spain on October 24, 2022
A Funcionar sem problemas ou limitações
Amandour
Reviewed in Germany on September 23, 2021
Weil ich für meine Canon EOS einfach mehr Stromreserve haben wollte, habe ich mir diesen Akkugriff gekauft. Ein Kaufargument war für mich außerdem, dass 2 passende Akkus mitgeliefert werden.Der Preis beträgt aktuell 40,99 €, was ich angesichts des Lieferumfangs und der Qualität für angemessen halte.Das Anbringen an der Kamera geht super einfach, ebenso wie das einlegen von 2 Akkus. Auch auf meinem Stativ hält das Produkt ausgezeichnet.Ich bin sehr zufrieden und gebe 5 Sterne. :-)
Todd M. Grivetti
Reviewed in the United States on July 5, 2021
I’ve been waiting for a product that I could use on my canon EOS T6 for sometime. This product works very well, arrived on time and was packaged securely. The Newer batteries came partially charged which was to be expected, which is why I have four other back up batteries with two chargers that allow me to exchange batteries without difficulty.The cable fits into your side port for your shutter release and will work when the battery on the unit is actually turned on. The batteries will last easily 2 to 3 days, depending on your shooting style. The only drawback is that in order to change your SD card on the EOS T6 is to take the battery pack completely off in order to access the compartment.Other than this this is a great product it is one that I would purchase again the side button works very well when you’re shooting vertical.
Kelly Samia
Reviewed in the United States on May 5, 2020
Really light weight. I ordered the wrong model before and found this one. Shipped really quick with prime and got here literally within two days. The only thing is I thought it would come with a charger for the batteries provided but it didn’t. The batteries fit perfectly in the canon battery wall charger that my T6 came with so no big deal! I recommend if you are looking for camera accessories on a budget.
Daniel Alberto Canche Canche
Reviewed in Mexico on May 18, 2020
Al igual que con todos se atora una de las baterías, así que proceder con cuidado. El material pues es lo que es, Plástico. No tan bueno como el de la cámara pero por el precio bastante satisfecho. Me salió mucho más económico que comprar en otro lugar.
Recommended Products
