Your cart is empty.
Your cart is empty.Made in the USA, Lang Tools (279) Brake Caliper Press allows you to work on various single, dual and quad piston calipers. With an extended reversing lever it allows for an easy change from spreading to retracting. The 360 degree ratchet swing gives access at any angle.
Steve
Reviewed in the United States on March 1, 2025
I ordered this while I was struggling with a no-name cheaper tool of a somewhat similar design. I finished the project before this unit arrived, so I haven't actually used it yet. Important features of this product:1. Ratcheting mechanism does not have excessive back drag.2. There is a threaded portion attached to BOTH plates. The threaded portion does not spin within the plate attachment. You will greatly appreciate that during initial ratcheting before the plates contact cylinder(s) and caliper body.3. Did I mention how much smoother the ratchet operates compared to cheaper tools?In my opinion, it's worth the higher price.
Bruno
Reviewed in the United States on February 26, 2025
Very sturdy tool. Pushes in pistons a C clamp can't.
Mario Galarza
Reviewed in the United States on February 15, 2025
Use it a lot good tool to have in a toolbox specifically on double piston calipers good quality and strong . I borrowed my friends and now I own one .
John
Reviewed in the United States on February 13, 2025
this fits the calipers of the multiple vehicles I've worked on. Works great and simple to use.
Gyropilot
Reviewed in the United States on January 5, 2025
This tool worked extremely well to compress the dual piston calipers on my 2014 Ram 3500 dually. Since the caliper opening is wider than this tool's maximum spreading ability, I simply used a 6” long piece of 1”x”2 scrap board as a space filler inside the calipers. This tool compressed the pistons evenly. It feels well made and substantial.
Charlie Weaver
Reviewed in the United States on August 28, 2024
I have four-piston calipers on my truck, and I struggled with pushing them back into the caliper when I didn't have this tool. I ordered this after I did my truck, but I needed to do my wife's brakes. Hers were single piston, but the tool worked like a charm and was way easier than the c clamp I had been using. I did a second set of 4 piston calipers and it works so well. It makes the process easy and almost fun. If you work on breaks, this is a must-have tool. It's economical and works great. I highly recommend it for your toolbox.
Customer
Reviewed in Canada on August 18, 2024
Worked very well on Toyota calibre
Daniel
Reviewed in the United States on June 3, 2024
I'm a diesel mechanic and a tool addict, I'll admit. I was taught the C-clamp method by my Dad, and he learned that from his Dad, and so on.This tool is like a best friend that you can pay a debt for with pizza and beer, the best friend everyone needs to have.Let's be real here, every single time you need to do anything on your vehicle at home, a tool magically disappears or is tied up somewhere else, and this is where the Lang Brake Caliper Press comes in. This tool is incredibly easy to use.Once the caliper is off the vehicle, a nice smooth ratcheting motion separates the two pads, some force is applied to one side, and the other pad uses force to depress the caliper piston.A useful note to some folks, when I got my package from Amazon, one of the pads was screwed in very tightly. One pad has normal threads and I'm pretty confident the opposite pad has reverse threads. They should both spin freely!Part two of useful notes - My fiancee's 2018 Mazda 3 Sport has an electronic parking brake, or EPB. I did an online order through Napa for her pads and it didn't mention anything about an EPB. Unfortunately the online tool suggested the wrong pads, and the gentleman at the counter never verified the correct parts. Only when I had her vehicle torn apart did I realize the rear brake pads were the wrong ones. I had to run into town again, and luckily they had the correct pads in stock and did not give me any grief about refunding the wrong pads.Also, due to her vehicle having an EPB, you need to put it in Maintenance / Service mode. These videos can be found on YT. Once taking the rear caliper off, the caliper piston will NOT depress if the vehicle is not in said mode.The ONLY caveat about this tool, is it did not fit the rear calipers on her 2018 Mazda 3. I did have to very carefully use a C-clamp for her rear brakes, Lang also does make a small brake caliper press for such an occasion.*Your vehicle may not need to be put in maintenance mode, but I might suggest researching prior to taking the brakes apart*Overall this tool is a 10/10, Quality USA made with a smooth ratcheting motion. I included those random details to hopefully prevent another person's headache out there. This tool is wonderful for front brakes!
Damazon Buyer
Reviewed in Canada on May 25, 2024
Not bad. As I suspected, it won't fit every caliper out there, so you need to have multiple tools. It works well, though.
john pugh
Reviewed in the United Kingdom on March 13, 2024
Exelent tool
Jake F
Reviewed in Canada on April 21, 2024
This product is amazing. Worked so well and I don’t know how I did my job without it for so many years. So easy to use and so much quicker to push the piston back.
Stephen
Reviewed in Canada on April 22, 2023
Good quality tool for the money, you get what you pay for. Worked great on my mid sized GM trucks with quad piston calipers but may be a little big for a smaller size vehicle. The plates are solid and the ratchet seems to be a good quality as well, overall I am happy with the product.
TuLowd
Reviewed in the United States on June 15, 2022
Great quality, well built, heavy duty tool mechanism and components. Push pads are massive and thick, but unfortunately oversized to fit inside the 4 piston Brembo's shown in the pics. These utilize one of the most common pad sizes: D592, same as Tesla S rear, some Jaguars , Vipers and the 2000 Ford Mustang Cobra R as well as the Ford Focus RS and others. Had to use a 14" metal chop saw to cut the pads down to size (length was too long by about 1/2" to fit inside the caliper housing to square up against the pistons. Once I cut them, tool worked great and without any effort. Finished the edges and corners, now I will have them re painted so they don't rust at the edges. Primarily going to be used on this car, so hoping if I need to use them on other vehicles that the pads are not too small now. Probably should buy a replacement set of pads so I have both. Kind of a drag, given I spent more than double the money than the offshore versions sell for as it is. Maybe I'll contact Lang and ask. High quality tool in any event.
Recommended Products
