Your cart is empty.
Your cart is empty.Big Horn 19055 Woodturning Figure 8 Double Ended Bowl Caliper. Double Ended Calipers are designed for measuring the wall thickness of turned vessels, especially closed form bowls and vases. When you close one end of the caliper on the wall of your bowl, you can read the thickness at the other end of the caliper. These are an indispensable addition to the turner's armory for measuring both wall thickness and diameters. Because of their design the measurement taken at one end automatically transfers to the opposite end. This enables the turners to take an accurate measurement reading without the need to remove the calipers. Measure the exposed end whilst the other is still in contact with the work. Opens to 12 inches.Big Horn 19055 Woodturning 피규어 8 더블 엔드 볼 캘리퍼. 더블 엔드 캘리퍼는 회전된 용기, 특히 닫힌 형태의 그릇과 꽃병의 벽 두께를 측정하기 위해 설계되었습니다. 캘리퍼스의 한쪽 끝을 볼 벽에서 닫으면 캘리퍼스의 반대쪽 끝에 있는 두께를 읽을 수 있습니다. 벽 두께와 직경을 모두 측정하기 위해 터너의 아머리에 필수적인 추가품입니다. 디자인 덕분에 한쪽 끝에서 측정한 값이 자동으로 반대쪽 끝으로 이동합니다. 이렇게 하면 터너는 캘리퍼를 제거하지 않고도 정확한 측정 값을 할 수 있습니다. 노출된 끝을 측정하고 다른 쪽 끝은 여전히 작업과 접촉합니다. 30.5cm(12인치)까지 열립니다.
Barry Carter
Reviewed in the United Kingdom on February 3, 2025
Very good, does what it should do to check thickness of wooden bowls
sf
Reviewed in the United Kingdom on January 11, 2025
Ideal for the price , does what it should and well made
Jim Brown
Reviewed in Canada on September 19, 2024
Good for a low cost item.
Ronda
Reviewed in the United States on August 7, 2024
Good quality and does what it's supposed to.
Joseph R.
Reviewed in the United States on August 2, 2024
Such a simple design. But the thickness it reveals (in the gap on the other end) is accurate. I use it for defining thickness's in turning wood bowls on a lathe.
Tom J.
Reviewed in the United States on July 25, 2024
I love this thing!!Fast shipping.
mike brenneman
Reviewed in Canada on July 23, 2024
I can make thin wall bottoms on bowls with this
Hardy Emerson
Reviewed in the United States on May 11, 2024
I am a wood turner i wanted one if works handy rugged easy to read
Rodger
Reviewed in the United States on March 23, 2024
This is a great measuring tool for lathe work
Tim Lines
Reviewed in the United States on October 22, 2024
Works great
Peter Slous
Reviewed in the United Kingdom on August 27, 2021
Very handy to have as part or your woodturners tools let’s you know how thick your timber is when gouging out the inside of the item that you are turning
Someonemysterious
Reviewed in the United States on October 20, 2021
The tool works as it is supposed to, but the metal bends easily. Make sure to hang it in a place where you won't bend it. However, it works well and is much cheaper than other brands.
Roger Schlenz
Reviewed in the United States on November 11, 2017
Got this today. A little large, 14" from end to end, 7.5" side to side, but no matter. It's 1/8" thick steel. When closed at one end, is 1/16" open on the other, but fixable with a brief touch of a grindstone. Was packed in just a padded bag, no other protection, so the ends were bent out of line vertically, but easily bent back into line. Ends were smoothly rounded. Edges were a little sharp, but usable, I didn't feel the need to sand the edges. Since the steel is rather thin, the center screw is retained by a 1/8" thick threaded washer, 3/4" diameter. I would have liked it to be made of a harder, or thicker steel, but all in all a good tool for woodturning bowls..
Recommended Products
