Your cart is empty.
Your cart is empty.Product Description
18KW Up to 10000 Gallons Swimming Pool Heater Thermostat for Swimming Pools, SPA Pools,Bathtubs,In-Ground Pools and Spas Above Ground Inground Pool
Swimming Pool fit for Thermostat Pool fit for Thermostat Heater Pool SPA Bath Hot Tub Electric Water Heater fit for Thermostat Introduction: Fit for Thermostat is designed specifically for the needs of the Jacuzzi and swiming pool, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation: The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user. P.S:Please refer to the instruction manual for specific installation procedures,thank you !! Note: Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less. The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents. Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install. Package Content 1 x Water Heating Thermostat 2 x Interface 1 x Manual
A Warm Pool with Pool heater, More Fun! Nothing beats a warm pool for your kids and the whole family. Have a warm pool, have more fun!
Electric Pool Heater
Swimming Pool Heat Pump
Suana
Gretel Felizola Hermida
Reviewed in the United States on November 19, 2024
Arrived defective, never worked. doesn't have product support from the manufacturer. Just amazon returned me full refund, but I ended loosing $350 Installation from the Tech who installed it
ChaoworkzFromTx
Reviewed in the United States on November 16, 2024
12x24 oval - I live S of Houston Tx ---- I installed it myself - it would work fine for about 15mins and the breaker would keep tripping and wire/breaker would get super hot ---- followed instructions and there was only 1 video on youtube with the same model with very poor instructions/explanations....... my pool pump is about 30 ft from breaker box -- after about $200 in materials it was very annoying.... I was about to return it and get a different one -- Fortunately I called an electrician friend, and he helped me -(i'm sure a company would have been very expensive) ... This is what i used and is working perfectly -- Cable= 4awg (about $2/ft at HoDep) x2... Cable=gauge 6 copper-ground (about $1.2/ft)--- 100amp breaker ($ i already had one) (Gfci recommended- i did NOT installed) .... is heating up very good -- started at 73 and it took it to 83 in about 24hrs and at 90 in 12more.... based on the prices of other water heaters and counting the price of the materials i used (excluding my first $200) - i think is still a good deal. I hope this information helps you make a decision.
Recommended Products