Your cart is empty.
Your cart is empty. APPLICATION
Injection Pump Gear Puller:
Works on Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT
Engine Barring/Rotating Tool:
Works on Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines
Easy to Use
Injection Pump Gear Puller:
Used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear.
Engine Barring/Rotating Tool:
Just insert the tool into the flywheel housing until it engages the ring gear,
then attach a 1/2" square drive ratchet or breaker bar and turn.
Go click the Buy Now Button and get this Tool with confidence!
If you have any problem about your order, please feel free to contact us.
REMDies
Reviewed in Canada on February 5, 2025
J'ai utilisé l'outil pour appliquer de la tension sur le shaft de la pompe haute pression et cela a fonctionné !Je n'est pas utilisé celui pour tourner le moteur.
Brandon
Reviewed in the United States on January 30, 2025
I used this to retime the CP3 on my 2014 cummins to remove the chatter from it, the puller worked well and allowedme to pull the gear without removing the timing cover and it held it in place as I tightened it and then while turning the motor over. I did not need the barring tool for my year and had to have someone hold the motor still when I broke the nut loose.
Dave
Reviewed in Canada on August 15, 2024
It works
Jackson
Reviewed in the United States on January 17, 2024
Pulled the get gear no problem quick and easy ten times easier then tryin to do it with a crows foot
John Rizzi
Reviewed in the United States on June 16, 2023
This gear puller does not have a stepped area to avoid making contact with the front cover. This will damage your front cover. The engine barring tool is nice and I like the grip only reason it got 2 stars not 1
Carlos
Reviewed in the United States on May 28, 2023
Slightly bent while pulling gear, but this tool was the only thing that worked. Took lots of heat and fighting well worth the money
William S.
Reviewed in the United States on October 26, 2023
I bought it to pop the cp3 off the gear. It does not fit inside the access hole on the front cover of a 2006 cummins. I had to use longer bolts and a socket taped on the pump side to do what I had to do.
Customer
Reviewed in the United States on June 25, 2021
It passed the test, very useful, I used it to push the diesel pump on a 2001 dodge ram 2500 and was impressed.
mike busboom
Reviewed in the United States on January 29, 2021
used on both 5.9 cummins and my backhoe. Worked GREAT!!!
wes saunders
Reviewed in the United States on July 13, 2020
it worked fine, pulled the gear off the CP3 easily, but then again, its a piece of plate steel with some holes in it and a couple bolts, how could it not work well.
Recommended Products
