Your cart is empty.
Your cart is empty.This matching Tongue and Groove router bit set cuts a 1/4" Thick tongue into stock up to 3/4" Thick. The cutting depth is 1/2" And the shank diameter is 1/2". The set is pre-shimmed and comes in a handsome wooden box. Additional shims are included in case further adjustments are necessary.
Gambit
Reviewed in the United States on January 9, 2025
Worked as expected.
Kathy Agar
Reviewed in the United States on January 29, 2025
Nice and sharp. Perfectly sized parts upon assembly. Good value, not a professional, should give me years of use.
Sandra
Reviewed in the United States on January 27, 2025
Worked well. Clean cutting in fir. Nice box for storage.
Mark Vermont
Reviewed in the United States on July 9, 2024
I bought these to Machine about 450 feet of one by five one by six one by seven and one by eight spruce and red pine lumber into tongue and V groove panelingRouting went fine other than you really have to tighten down hard to avoid them slipping in the collet. That sucked a bit
Scott Ward
Reviewed in Canada on July 16, 2024
Used to tongue and groove but joints on 800 square feet T&G pine. Expected a bearing to blow or become dull. Quality was way more then I was expecting. I cleaned them up and expect o could do another 800 soft! Awesome!
Jaybird
Reviewed in the United States on June 18, 2024
I have used several times. they are sharp and do a great job.
Chris
Reviewed in Canada on November 9, 2024
3/4 shank works great
Tiffany
Reviewed in the United States on October 17, 2024
I have several different types of Yonico bits. They all work as expected.
EddieRock
Reviewed in the United States on March 9, 2023
I had 3 different widths of hardwood floor and they were from different manufactures and because of this, the grooves were different sizes. I used these in my router to make them fit together perfectly! Don't try to use these without putting your router in a table. It just won't work. I purchased this really crappy Router Table https://www.amazon.com/dp/B07X1RKLSW to put my router in and used these bits. It worked great.These bits never got dull and are really well made. I would highly recommend them for putting tongue and groove in oak flooring on both the long AND short edges of the floor to fit them together.Pros:Well madeSharpAccurateCons:Simply hard to get out of the case. Yah, they are in there goodI highly recommend these bits. The brand is amazing!
juan bautista galaviz campos
Reviewed in Mexico on November 18, 2023
Me gusta usar esta marca de brocas porque el filo dura mas que el promedio de otras brocas.Buen producto
Jonathan Beaulieu
Reviewed in Canada on July 3, 2022
Rien à dire
Gabriel Cerecedo G
Reviewed in Mexico on October 1, 2021
Las compre para amachimbrar madera para una pared, hacen la hembra y macho con una cara en "V" muy adecuada para pared o piso. Muy buen filo pues cortan perfectamente sin astillados. Las recomiendo ampliamente pues son Yonico. Se puede usar en contrachapado de 18 mm, tablas de 3/4", 7/8", 1/8" etc. Yo ya hice mis patrones para estas medidas, así que cuando lo requiera, calibro la altura con mi patron adecuado rápidamente y fácilmente.
KaitLynn
Reviewed in the United States on January 13, 2016
I will start by saying that I like these bits. As other reviews state, they aren't perfect. I used them to make shaker style cabinet doors out of 3/4" premium pine and, after using several pieces of scrap, decided that there was no way to get them to not leave a small shaving of wood on one edge of the board when using the tongue cutter. However, this was easily removed with a sharp chisel and, after sanding, my doors look great. So, while you might not have that one extra step by going with a higher priced set, these worked great for my needs and the price was a big bonus. I will gladly trade the 60+ extra dollars for a small amount of chisel work.
Recommended Products
