Your cart is empty.
Your cart is empty.Use the Yonico Bullnose Beading Router Bit 13191q for 1/8"r, 1/4" bead bullnose cuts. Two flute carbide cutters and 1/4" shank. Bullnose bead router bits are great for adding beads to furniture corners, legs and face frames. This design softens the edges of the piece and adds a classic look to it as well. To create the complete corner bead on furniture edges and legs, flip the stock lengthwise and rotate to the same corner to complete the profile.
Fab
Reviewed in the United States on March 6, 2025
Not very expensive…works great
Edwin Rosario
Reviewed in the United States on February 8, 2025
Cuts well however the bearing does not line up well such that the bit leaves a flat spot. I’ve had to remove the bearing and use the bit in a router table which works well as long as the wood is perfectly flat.
Mark Nelson
Reviewed in the United States on February 3, 2025
First time using one of these style bits.
S.R.Tauzier
Reviewed in the United States on September 24, 2024
The bit works fantastic! I made a lot of money in the French Quarter with this bit!!
Goose Slayer
Reviewed in the United States on December 30, 2024
Well made, sharp, accurate, should last a long time.
Robert Matlaga
Reviewed in the United States on December 28, 2024
Bit worked perfectly. Cut Brazilian cherry flooring to create a bullnose.
JohnnyB
Reviewed in the United States on December 18, 2024
I needed to match some base trim for a remodeling project I'm working on and this bit really worked well.The bearing was very smooth and the carbide was super sharp. Using my handheld router, the bit cut perfectly in both pine and the poplar boards that I will be using for my project. The cut was super smooth with zero chatter and required no sanding after the cut. I expect it will work well on harder woods such as oak or maple also. For stability, I generally prefer bits with a 1/2 shank and this bit has that as well.I would say this is a high quality bit at a very reasonable price.
Corvairking
Reviewed in the United States on November 3, 2024
Great item and price and service. This is a quality router bit that is extremely sharp and makes short work of your beading projects. Leaves a nice professional mounding like appearance.
MR1318
Reviewed in the United Kingdom on June 26, 2023
Have now routed nearly 80 metres of softwood with no fall off in performance. Paid 14gbp inc postage from the states to UK. At least 5gbp cheaper than anything I can get from around the corner (and 15gbp at the time of purchase), and compared to trend (who i have used for jigs), well, let's not even go there.Happened to check 15 minutes after order placed, and item was despatched. Arrived so quickly, Amazon still think it is delayed, months later.
Customer
Reviewed in the United Kingdom on June 2, 2023
Used for panelling. Very sharp and good clean cut. Used on about 20m length of redwood so far and still good
Tarachand Satsangi
Reviewed in Canada on January 13, 2022
Works great as expected.
Luigi Solari
Reviewed in Mexico on June 2, 2021
Yonico son buenas brocas, valen el dinero que cuestan. No son Amanatools o Freud, pero sacan de apuros y tienen buen filo
diywannabe
Reviewed in the United Kingdom on February 3, 2018
This was purchased for a specific job to cut a 3/8” bead and return along the edges of some MDF door linings.This is not a size I usually need, and as cutting MDF is not kind to router bits I only wanted a budget choice, and this one was less than half the price of the Axminster alternative.This did the job perfectly. It did need a medium speed setting to prevent burning but it ran smoothly and cut very cleanly, and showed no signs of wear at all.I have tried Trend bits as a budget option before and found them to be a waste of money. This performed so well I am going to buy more of the same brand for day to day use.One note is that this was listed on Amazon UK but shipped from Amazon in the US and arrived in a few days. If Amazon UK are reading - please consider stocking these here.Recommended.
Recommended Products
