Your cart is empty.
Your cart is empty. EANOSIC 1/4-Inch Shank Solid Carbide 60 Degree V Groove Router Bit Chamfer End Mill for CNC Engraving and Chamfering
The Nano Blue Coating with High Hardness and Heat Resistance.
This bit works great with any V-Groove application and specifically designed for creating background effects in wood carving and sign making.
Robert
Reviewed in the United States on January 6, 2025
Good product works well for it's purpose
Meng
Reviewed in the United States on January 22, 2025
This 60-degree V-bit is an excellent addition to any toolkit! It delivers smooth, precise cuts with ease and handles detailed work beautifully. The durability is impressive, holding up well even after extended use on a variety of materials. It’s a reliable, high-quality bit that cuts cleanly without chipping or rough edges. Whether you’re working on intricate designs or straight grooves, this V-bit gets the job done perfectly every time. Highly recommended for anyone looking for precision on a budget.
Kindle Customer
Reviewed in the United States on August 16, 2024
Great bit for the cnc router! I love v bit routing and this has been great! Still sharp after several carves.
robert e allen
Reviewed in the United States on June 25, 2024
Have used many of these on my cnc Great value lasts alone time will be purchasing more
Yuvak
Reviewed in the United States on June 14, 2024
Works well. I used it mostly for cutting Oak. See manufacturer's reply.Hello there,Thanks for your emailThe recommended speed of these bits is 18,000-20,000 rpm.The recommended feed rate is 3 to 5 meters per minute.Choosing a bit with a blade length greater than 2 to 5 mm of the board, otherwise, it is easy to break.Even different machines and different wood material may different.You should try slow feed rate and shallow cut first, and then gradually increase the speed rate and depth appropriately. And find the best combination.Sincerely,EANOSIC Shop
Jeffrey
Reviewed in the United States on June 14, 2024
If you are carving PVC, do not buy any other bit but this. It cuts the PVC and removes the chips. Yes, chips, not dust. A must have for PVC!
Sean A.
Reviewed in the United States on January 5, 2024
My first time using a 60° V bit. Used it to carve pine in 2 passes. Came out nice.
Mike
Reviewed in the United States on December 21, 2023
The product image indicates a slight angle of cut vs the flat, true vertical, cut geometry that it comes with. This does effect how the tool cuts, so it should be noted. The reason I chose this one over others was that the image shows an actual cutting edge, not just a flat (smash it off vs cut) surface. Due to this, I've had to change how I make my cuts. The coating looks pretty, but only adds a minimal amount of longevity to the tool. Approx. 5% added wear resistance. Depending on what material you are using this on, I'm using wood, it may help more (i.e. in resins/plastics). I would not recommend this for metalwork unless you like deburring quite a bit. Better to invest in a drill/mill if angle is key, for engraving, I'd suggest getting a spiral flute center drill.
Marcel Proulx
Reviewed in Canada on August 7, 2022
Excellent produit de qualité je le recommde
Recommended Products
