Your cart is empty.
Your cart is empty.Product Description
Our LED driver With an input of 90-265V AC 50/60HZ, constant output of 12V DC 2A, providing a total power of 24W. With an input efficiency of 88%, an LED power supply ensures that your LED lighting systems receive the required power for optimal performance.
Our LED driver's compact size of 4.1*1.9*0.5in (LxWxH) and weight of 179G/0.39LB make it easy to install and use.
Our 110 AC to 12 DC LED Driver is a dependable and effective alternative for powering LED strip lights, LED light bulbs, and other LED lighting fixtures.
Installation Instructions:
- Making sure that the input voltage matches the specifications on the product label before connecting the LED driver to the power source.
- Using a connector and cable connect the LED driver to the LED light fixture.
- Plugging the LED power supply into a power source.
- Turn on the power source and verify that the LED light fixture is working correctly.
Product Specifications
- Input: 90-265V AC 50/60HZ
- Output: 12V DC 2A
- Power: 24W
- Operating temperature: -40℃ to +50℃.
- Operating relative humidity: 10%-100%Rh
- Size: 4.1*1.9*0.5in (LxWxH)
- Waterproof: IP67
- Input efficiency: 88%
- Weight: 179G/0.39LB
Scope of supply
- 1x LED transformer
- 2x port connector
Applications
These LED drivers/transformers are for neon lamps, G4 lamps, flood lights, MR11/MR16/GU5.3 spotlights, billboards, advertising signs, CCTV cameras more. The maximum wattage of the strip does not exceed the maximum output power of the LED driver of 24w.
When using an LED power supply, the following guidelines should be observed:
- Ensure that the total power of the connected LED strips or other devices does not exceed the maximum power output of this driver, which is 24W.
- Do not open or modify the driver. Doing so may cause electric shock or product damage.
- Please keep the LED power supply away from children to prevent accidents.
- For safe and proper use, use this product under the direction of a qualified electrician.
DV
Reviewed in the United States on February 5, 2025
Works great! Make sure you check your specs and know what you're doing.
Harold H.
Reviewed in the United States on February 27, 2025
Great value
Eric V.
Reviewed in France on January 16, 2025
En association pour lampe de piscine à leds 54W cf. photo, ça fonctionne bien.Petit reproche, les câbles entrée et sortie sont un peu court.
ANDREA
Reviewed in Italy on September 26, 2024
Dopo nemmeno un mese è già rotto
Mark L
Reviewed in the United States on August 23, 2024
I like the Android app and how easy it was to set everything up.What I do not like is the instructions. Very tiny folded page with English on one side and I assume Chinese on the other.The English side shows Hot and Common going into the switch and only Common wire connecting to a light bulb. It does not show Hot going to the bulb at all.The Chinese side shows both Hot and Common going into the switch and coming out of it and connecting to the bulb.This is how I wired it and it does work.It works great. My phone was had WiFi turned off for my test and the switching was very fast. Maybe a,slight delay but just milliseconds.I am taking off a star because when the switch is turned off, I read about 12 volts coming out of it.It has no affect, that I can see, on a light bulb or a siren but it is something to be aware of. It may cause problems with sensitive electronics.
Ansel
Reviewed in France on May 15, 2024
J'ai remplacé une batterie d'halogènes de 50w dans le faux plafond de ma salle de bain pour alimenter des spots à LED de 5w. Le transfo Karyoosi de belle qualité de fabrication, bien étanche et de petite taille est tout à fait conforme à ce que je recherchais. Il est livré avec deux dominos sans vis très pratiques. J'ai dû également changer les douilles GU5.3, les anciennes souffrant de mauvais contacts. Très content du résultat.
Client d'
Reviewed in France on December 7, 2024
Pratique et facile à installer, fonctionne parfaitement
Mike D
Reviewed in the United States on December 6, 2024
Defective right out of the box ☹️
Sergio
Reviewed in the United States on December 16, 2024
Very good product
Sébastien
Reviewed in France on November 8, 2024
J'ai un problème avec le transformateur qui semble sortir du 6v au lieu de 12v et donc cela ne permet pas d'allumer 2 spots 12v.Je ne sais pas comment faire pour contacter le vendeurDoes a seller can contact me ?thx
guess what's upcoming
Reviewed in the United States on November 25, 2024
I bought this for a later package project. I really love that. It has a box that I was able to work on my shelf and keep it ready to finish off the project.
Interstate Inn
Reviewed in the United States on October 30, 2024
I ordered 15 of these drivers, unfortunately, one was cracked, but it still worked. Very happy with the purchase.
M Mount
Reviewed in the United States on December 1, 2023
I like the overall build of this 12v PSU I intend on powering box fans in power amplifier projects. I wanted an all metal case (check) the i/o leads are also ideal for my project (check). I still have to "test" them, for low emi/emf on the AC line, given their build I will assume no issues (check). They are such a nice form factor, proportion and size too (check) for intended applications.UPDATE: I have the P/S hardwired powering fans (200ma load) inside the amplifier chassis, they are dead quiet (no HF veiling or hash) in terms of EMF/EMI, I was concerned. *Not a reflection of the product. More as a consistent experience with too many SMPS, even exotic ones.
Recommended Products