Your cart is empty.
Your cart is empty.Product Description
Swivel Stem Casters, Heavy Duty Double-Locking Castors with Red PU Wheels Quiet and No Marking with Metric Thread Rods M10-1.5x25mm Pack of 4
The caster wheels are make of PU with high-carbon steel, which enable the caster can move softly, smoothly and silently!
PRODUCT FEATURES:
-- √PU material -- Wear-resistant & Smooth & Silent & Safe to floors;
-- √M10 Stem -- HEAVY DUTY & HEAVY CAPACITY;
-- √360 Degree Swivel -- Flexible & Rotatable;
-- √Dual Locking Brakes -- Instant Mobility and Stop;
-- √Widely Used -- for home workbench, shopping mall, factory, school etc all occasions!
Installation Methods:
Mounts on the wooden plate;
Mounts on the threaded pipe.
Our casters are exported to different countries and are widely used for different industrials of medical, workbenches, school, shopping mall, hospital etc! The casters can be fixed to anyplace you want to move quickly, which is your indispensable tool and helper!
SPECIFICATIONS
Item: M10 Stem Casters Wheels
Material: PU
Brake Type: 4 casters with Dual Locking
Thread Size: M10-1.5x25mm
Size: 2Inch/3 Inch/4Inch/5Inch
CAPACITY: 600lbs/800lbs/1000lbs/1200 lbs.
Weight: 610g/caster -3 inch; 760g/caster - 4inch
3 inch Casters:
Length: 130mm/5.1"
Total Height: 135mm/5.3"
Installing Height: 110mm/4.3"
Width: 60mm/2.36"
Wheel diameter: 75mm/3"
Wheel width: 32mm/1.26"
WHY CHOOSE US?
We have been in this line for years, we have our own factory and cooperative factory to finish every caster wheel.
We use advanced equipment, and the latest technology for ensuring the longer life and flexibility of casters!
We have our strict quality inspection system to make sure every caster wheel is in high quality.
Colton
Reviewed in the United States on February 19, 2025
I put them on chair and it never wants to stop rolling! It's great!
Jared
Reviewed in the United States on August 25, 2024
I mounted these to my klutch welding fixture table and it is now my new favorite work surface. The wheels roll over surfaces smoothly, they were easy to install, they fit perfectly ,and they appear to be manufactured well. The wheel locks are also easy to engage. I also love the red appearance of the wheels.
J. Clark
Reviewed in the United States on August 20, 2024
I used these with a welding table - they handle the load easily, move smoothly and easily, including over joints in the concrete floor - I chose the larger diameter for that reason, and they've been great!
David P.
Reviewed in the United States on July 17, 2024
My use case is to replace some casters in a stand for my planer. The casters I removed did not lock well so the planer moved when I was using the planer.The stand is angled side-to-side and front-to-back. I made custom pieces of wood blocks out of oak. The casters I removed had 5/16in threaded inserts. The new casters have 10mm threaded inserts.The set includes all the hardware, and two wrenches. The bottom of the stem is 16mm. The nut to lock the stem is 14mm.I have a lot of experience installing threaded inserts in wood. The insert needs to be held at 90 deg to the hole while being threaded into the hole.The 10mm inserts needed 9/16in hole. I have 9/16in and 5/8in Forstner bits but nothing in between. I think the inserts would have been easier to install with a slightly larger hole.The inserts have a 10mm hex at the top to drive in the insert. This hex key is NOT included. I have this size of hex key so not a problem.My challenge was aligning the insert while starting the threading. I normally mount an insert driver in my chuck, but my drivers are for inserts with a top slot, not a hex slot.I did not want to cut my 10mm hex key to had to cobble together a 5mm machine screw with a number of nuts tightened with the flats aligned. The head of a 5mm machine screw is 10mm. This is not the strongest machine screw, but I was able to mount this in my chuck and get the insert threaded about half way then completed with the 10mm hex key.The new casters are a big improvement for the planer stand. Smooth operation and good brake design.
steven zinn
Reviewed in the United States on December 28, 2024
I like that they lock the wheels and spinning, as well. Will be ordering more.
Jackie the Jack
Reviewed in the United States on December 15, 2024
If the cheap plastic wheels broke off your bowflex weight stand like mine, look no further.These wheels are direct replacements for the stand in my picture.No more worrying about cheap plastic wheels breaking off.These are high quality and sturdy.Took minutes to screw these on. They come with wrenches to make removing the old ones and installing the new ones a breeze.Biggest upgrade you can do for your bowflex weight stand. Don’t wait for your wheels to break off and become a safety hazard.
Customer
Reviewed in the United States on November 17, 2024
Castors work great for a flip top planer/miter saw table. Easy to roll, smooth moving, very sturdy. Had to work a little bit for installation since I didn’t plan correctly. Locking action works great.
SLB86
Reviewed in the United States on April 7, 2022
I purchased a Jet drum sander but the stand only came with leveling feet. I balked at the nearly $100 official caster wheels from Jet. These worked perfectly. My only criticism is that the images show the red color to be a bright red (like a Chicago Bull red) but it was more of a dark crimson / maroon color. Otherwise they're sturdy enough for my application. The sander and stand weigh a little less than 200lbs all together. Rolls smooth on my concrete garage floor and no issues going over the expansion gaps. The total lock feature is really nice.
Recommended Products