Your cart is empty.
Your cart is empty.Product Description
Feature:
Our Chrome keyed main shut off ball valve kit is what every indoor, outdoor fireplace and fire pit needs to be safe. Most codes require a shut off valve at the appliance so it is in reach in case of an emergency.
Common sense also suggest that a shut off valve be within arms reach for emergencies. Our shut off ball valve is controlled by a key so when the key is not inserted in the valve it can't be operated.
This feature keeps small hands from accidentally turning on the gas. The chrome flange will provide a finished professional look to your project. It can be wall or floor mounted. With the valve body on one side of the structure insert the chrome flange and screw down until the structure is sandwiched between the valve and flange.
Package Included:
1 x 1/2-Inch Straight Quarter-Turn Shut-Off Valve
1 x 3-inch Key
2 x 3/8 Male Flare x 1/2 NPT Fittings
Universality:
- Indoors
- Indoors Outdoors
- Natural Gas (NG)
- Low Propane (LP)
How to Use the Gas Valve Key?
With just a twist of your wrist you can turn on your gas fireplace with our gas valve key.
Simply insert the key into the escutcheon (which is the protective cover for your gas valve stem), then twist the key in order to open and close the valve. Remember to apply the rule "righty-tighty, lefty-loosey" - turning the key to the left will open the valve (turn on the gas). Afterward, you'll simply turn the key to the right to close the valve (shut off the gas).
This 1/4 Turn Ball Valve kit is the perfect way to control gas coming into your fireplace!
James Campbell
Reviewed in the United States on January 4, 2025
Mounted like needed controls gas flow easily
Scott Ledford
Reviewed in the United States on November 25, 2023
Good sturdy valve with good key for safety
Noslen
Reviewed in Canada on August 24, 2021
Used this quarter turn gas shut off for a fire pit project. Works great.
Grumpy Guy in BC
Reviewed in Canada on August 24, 2020
Was something Home Depot didn't carry and was a way better option than full kit alternatives. PL'd it into a brick I drilled for our fire pit and it works perfectly.
RugbyRN
Reviewed in the United States on July 24, 2020
The media could not be loaded.
Ryan R. Smith
Reviewed in the United States on June 8, 2020
My ONLY complaint with this is when I went through a 3/4” board it was wobbly on the inside of my fire table. I had to build the inside out and then use construction adhesive to hold it in place. I may have did it wrong but was the only feasible way I could figure out. Other than the “sturdiness” I will be buying again for my next table.
Paolo A.
Reviewed in Canada on June 28, 2020
Quality is excellent the key is solid and prevents inadvertently being turned on by a child. The valve is a little difficult to turn at first but gets better over a few uses.
SConn
Reviewed in the United States on October 6, 2020
Good quality item, looks great and seems to do exactly what it’s supposed to do. I would have liked some instructions provided by the mfg. but it was easy enough to figure out.I ended up mounting it by sandwiching two 1 1/2” deck boards and then boring a 1 1/4” hole. Worked well.My only complaint is that I am using this with a 90k BTU Stanbroil burner. Being a 1/4 turn valve, there isn’t much room for adjusting the flame height. I think a multi-turn would have been better in my case. At any rate, this valve does work well.
Jimmy
Reviewed in the United States on April 3, 2020
Bought this to rebuild my fire pit. It was not a drop in replacement but I knew that when I bought it. It's made well, heavy and has been working great.
Kathy E.
Reviewed in the United States on July 20, 2019
I used this in converting a wood fireplace to propane, looks fine, easy enough to install once you've got access to the pipeline connections.If you're installing this into a wall as I did you'll have to cut a hole twice the size of this, I put the bottom on the pipe going to the fireplace then dropped the pipe down into the wall and tightened the pipe into the shut off.One good thing, the chrome part threads on, however close or far away you have this to the wall you can thread it to match agaist the wall, creating a clean look.I had a shut off outside but I also wanted one near the fireplace, it just made sense to me in case of a problem I can shut off fuel supply without running outside to the tank. I already had several holes in the drywall to install the iron pipe, why not put in an extra step of safety?One step to remember, before attaching to fuel line look at the way the arrows go on the chrome part, if you install it wrong your off and on will be the opposite, thread the chrome part slightly on, hold it up to the wall, turn the key to make sure it's open or closed according to the arrows by looking into it, if it's wrong, simply flip it over before installing.
Michael
Reviewed in the United States on July 14, 2019
I purchased this for a new outside deck gas fire pit I made. Easy enough to install but requires some special permanent wood working talents to make it Work. I needed to mount this unit inside my firepit. I needed to use several large washers to bring the "T" high enough above the wood wall so the hoses could be connected. I use quick connect hoses for easier firepit storage. The Key works well for on/off however there is very little play in the fine adjustment. We Love the firepit in the summer evenings but dont want the huge flames. It takes a bit of fine tuning to get the gas adjustment just right. Remember to use plenty of teflan tape and test all connections with lots of soapy-bubble mix. I would also recommend a good shut off valve down line... just in case.
Colin
Reviewed in Canada on July 3, 2018
Works perfectly. Appears to be a solid product.
nathan
Reviewed in Canada on May 18, 2018
Good quality parts
Recommended Products
$20.98
$ 10 .99 $10.99