Great case!

I bought this SmallRig frame and the t-mount plate for use with the Moment 18mm wide angle lens on my iPhone 15 Pro max. I got this to take on a trip to the UK, instead of carrying a huge amount of gear for my DSLR. I was able to pack this, the wide angle lens, a small selfie stick/tripod combo, extra battery charger and some lens filters all in a small sized TomToc cross shoulder pack. Did I miss my DSLR? Not a bit. I enjoyed being able to slide the wide angle lens on when I needed it, and pop it back in my pocket when I didn't. I enjoyed being able to use the sturdy short selfie stick/tripod way more than I thought I would (It has the tripod mount bolt on it) which was able to screw into any side of the SmallRig frame for both landscape and portrait modes. The strap slot on it was really nice as I used a wrist strap quite a bit when I was swapping the lens on and off, as well as having extra piece of mind of not dropping it with an expensive lens (let alone the expensive phone), also the wrist strap was nice in that you had extra peace of mind from having it attached to your wrist, making it harder for pick pockets to pull it out of your hand while you were using it. It is BIG though. It fits in all my shorts and jeans pockets just fine, but it's just going to be used for when it is replacing my DSLR, and not an every day frame/case. I found out the newer iPhone's have a full Action Mode as well for video, meaning it can do all the thigs a GoPro can do. I was able to mount the SmallRig case onto a GoPro chest strap (using the screw mount), and it held just fine for a full 1 hour mountain bike ride. I like that you can swap the mount plates out too in case you want to put different style/brand lenses on it. I really like this rig! It did exactly what I wanted to. When I am not using it, I swap back to a thinner daily use case, and leave the SmallRig in my camera bag.

Some mixed reviews on this, but my copy is excellent. My iPhone 15 pro max fits perfectly and once seated, there’s no wiggle. As if it came with my phone from Apple.Using this as a plain case or as a daily driver, no. It’s way too slippery. Zero grip.Using this as a centre piece for a rig build, yes, it is really good. It’s well engineered and the handles, lights, microphones all fit as they should. It is smaller than the large version (obviously) of this where the phone fits via clamp and magnet. That one is good too, but this one is form fitted for the phone model. Smallrig has good quality control, luckily.I like this one as you can quickly attach your items and once done shooting, quickly strip it. Here’s looking at you Tilta Khronos.If you’re into rig building, I highly recommend this. I have others, including the Tilta Khronos, Beastgrip Pro and this Smallrig so far is my favourite.Recommended.

I also wrote a review for the filter lens not fitting correctly nice case but accessories don’t fit securely and also the volume and other buttons are extremely annoying and hard to operate feels like it was thrown together and not thoroughly tested.

My favorite case/mount ever. 10/10 will buy again when this one gets beaten up bad.

The cage looks nice. It is big so just know that. It’s possible to daily it if you wanted to but it’s a handful.Main issue right now is there’s a little play in the top part. Maybe I’m being picky but if I tap on it it makes a noise. If I put it down on the table it makes a noise. I’m assuming the play is from the locking mechanism. I’m sure it won’t fail but it’s annoying to hear that on day 1 and hope it doesn’t get worse.

As someone involved in both photography and videography, and now with my recent acquisition of the SmallRig Brandon Li Mobile Phone Cage for the iPhone 15 Pro Max, it has dawned on me just how much I’ve come to depend on the outstanding quality and value of the various video/photo accessories, light modifiers and even cages and lenses for my mobile phone videography, produced by the SmallRig company. They have an obvious commitment to quality and a practical design aesthetic that I find appealing. I even like their plain brown, plain inner-wrapped packaging; simple and down to earth.First, let me comment on the color and finish of the Brandon Li Cage: Gorgeous! The rich emerald green anodizing is lustrous and the understated Brandon Li graphic is tasteful and unobtrusive. Even the packaging design is artful. In my opinion, assuming the color and design appeal to you, it’s well worth the extra few bucks more than the cost of the plain black one. But that's a matter of taste.The Smallrig Cage is manufactured to precise tolerances; you can almost hear the air rushing out between contact surfaces when the iPhone is being slid into the Cage’s protective rubber channel; all contact surfaces are rubberized to protect the phone. Installing the phone is quick and simple, thanks to a hinged latch. The tongue and groove designed latch itself is evidence of the thoughtful attention to detail Smallrig imbued into this Cage; it has an affirmative click when latched, and when needed, a quick release button to open the closure.The fit of the iPhone inside the inner channel of the cage is perfect; not to tight, but without any play either; closing the latch presses the phone into the rubber channel. This makes installing, and particularly pulling the phone back out, simple and effortless. The four control buttons do require an affirmative pressure to actuate, and provide a soft click when engaged; I consider this a safety feature on a production rig against accidentally changing a setting.Fabricated into the cage are the usual accessory mounting options, including a couple of cold-shoes and ¼” threaded holes all around to further build out a video rig. Accessories such as a portable light, microphone, handles, etc., can be attached, options offered by Smallrig themselves. There are alternate backplates available, sold separately, to accommodate different filter mounts, and extra screws are supplied to do so. Also built-in, and unique to Smallrig’s cage, are quick release slots that accommodate a pretty cool side handle from their Quick Release ecosystem. Additionally, the cage can be attached to a tripod or gimbal by one its ¼” threaded holes. Or, without anything attached, the cage itself, manufactured from lightweight aluminum, provides sleek, low-profile protection for the iPhone and allows for more stability when shooting handheld.This Smallrig Brandon Li Cage for iPhone 15 Pro Max is the matrix to a specific ecosystem of accessories and components so it is important to be clear as to whether or not it will accommodate gear you already own; read the description carefully for that information.The Smallrig x Brandon Li Co-Designed Cage for the iPhone 15 Pro Max is not only unique, but also provides a great deal of protection, functionality and versatility for the iPhone videographer. A Super useful accessory for increasing production quality.