Your cart is empty.
Your cart is empty.Product Description
Seismic Audio 15" Passive Subwoofer Cabinet
Our passive 15-inch pro audio subwoofer cabinet delivers the low-end sounds loud and clear with a 15-inch woofer and 300 watts RMS. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these subwoofers will deliver the deep bottom end you want! Great quality powered subs are very hard to find, especially affordably. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash sound great. With your purchase, you will receive a passive 15" subwoofer cabinet pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!
Baby Tremor 15
15" Passive Pro Audio Subwoofer Cabinet
This listing is for an 15" pro audio passive subwoofer cabinet. You will receive one passive 15" pro audio subwoofer pictured and described above. This high-performance, passive subwoofer speaker system was designed with larger PA or DJ settings in mind. The Baby Tremor passive 15" subwoofer cabinet provides the power and performance you need. This passive subwoofer yields powerful deep bass reproduction and tight low end in a compact cabinet. The Seismic Audio brand was designed with the notion that every musician should have access to high-quality pro audio gear affordably.
SPECIFICATIONS
- Model: Baby Tremor PW
- 15" Powered Pro Audio Subwoofer Cabinet with a 70 oz Magnet and 3" Voice Coil
- 300 Watts RMS | 600 Watts peak (wired at 8 ohms)
- Connectors: Two 1/4" and Two Speakon
- Sensitivity: 96 dB
- Frequency Response: 35 Hz - 800 Hz
- Dimensions (HWD): 23.25" x 20.75" x 19.75"
- Full Metal Grille and Recessed Metal Handles
FEATURES
Back Panel
The Baby Tremor is outfitted with heavy-duty jack plates that houses two 1/4" and two speakon connectors and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio
Protective Hardware
Heavy-duty, rugged hardware protect our Baby Tremor sub cabs with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet. Also, the Baby Tremor comes with a pole mount in order to mount main speaker cabs elevated above.
Heavy-Duty Recessed Handles
In order to transport your subwoofers easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.
BIG TEX
Reviewed in the United States on February 24, 2021
Grat sound. I will be buying another one.
DIZtheDJ
Reviewed in the United States on August 22, 2020
Im honestly a little disappointed, i paid big money (to me) and i cant get the thing to make any noise... what ever it does is sound like its seriously blown or something... idk to blame the carrier or the seller
melbourne maxwell
Reviewed in the United States on December 20, 2020
Bass
Mario L. G
Reviewed in the United States on January 27, 2020
Great product for the money. Built in Low frequency filter ( very convenient ) Not heavy at all and still deliver a good low frequency power, very happy with it. I got two of them. S.A make good products.
Renee
Reviewed in the United States on September 6, 2016
I have ordered the Seismic Audio Baby Tremor for school use. The order had arrived on Friday before Labor Day. The Box arrived dented on certain places and with a few punctures. It was understandable with the damage of the box as the item was a bulky and heavy package to handle during shipping. After opening the top flaps of the box, the package seemed to be well packed for shipment. Once I had gotten a chance to remove the speaker from the box, I had realized that damage was done during shipping as two of the corners were dented in. Even though the package seemed well packaged and the speaker had metal corners installed, the speaker had still gotten damaged on the corners. As show in the picture I had taken, the metal corner had dented inward. One of the corners was badly dented and the other damage corner was not as bad. After checking the exterior of the speaker, I have connected it to a Crown XLS 1500 amp. When turning up the amp to approx. little less than half way, the speaker created a vibrating noise. It sounded like something rubbing or lose. I will look a little deeper to see what the cause was. At this point, I am considering returning the product, but have to find another product for the school to use.
Kindle Customer
Reviewed in the United States on March 28, 2016
I bought one of these at first just to see how it would work, never tried seismic audio before but I must say I was impressed. They do require a lot of power to push them but they shake the ground for sure. I ran it hard for about 5 hours nonstop and never seemed to skip a beet. I use it for small to medium DJ parties and people are impressed with how much bass it puts out. Just have an amp that can supply a good steady amount of power and it'll run great. I'm definitely going to be buying another one soon.
Brent Bethley
Reviewed in the United States on November 7, 2016
Much better than expected...it gave my music the bottom it needed with clarity and no distortion..I would recommend these to anyone looking to upgrade their speaker system
Sumnero
Reviewed in the United States on October 13, 2015
I ran these off of an MBM 4000 amplififier givig them approximately 500 watts at 8 ohms. I wasnt' sure if they were really working until I turnrd up the amp to 80% lat night and then I felt my hands vibrating on the open door casings I was hanging onto while I was listening. Very nice thump!!
Recommended Products
$29.99
$ 13 .99 $13.99
$75.99
$ 36 .99 $36.99
$57.61
$ 28 .99 $28.99
$26.99
$ 12 .99 $12.99