Your cart is empty.
Your cart is empty.Product Description
Microphone floor stand with scissors boom arm
Stable Flat Base
The base weighs 6.6 pounds, it is more stable and has greater load-bearing capacity. The thickness of the base is 0.32inch, saving space. Compared to tripods, the flat base avoids the issue of the tripod being tripped by feet.
Adjustable Folding Arm
The stand arm can be extended 135° front and back and 180° up and down.The position of the 3/8" connector can be adjusted up and down 270° and rotated 360°, and the MIC can be adjusted to face any direction.
Overhead Mic Stand
The height of the pole is 105cm (41.3 inch), which is 31cm (12.3 inch) higher than a 74cm/29inch table. When the mic is not in use, the stand arm can be easily pushed above the head. Just pull down slightly when using mic.
Compatible for 5/8" interface MIC
For Blue Yeti, Blue Yeti Pro, Blue Yeti X, Blue Snowball, HyperX QuadCast, HyperX QuadCast S, HyperX SoloCast, Shure SM7B, Shure MV7, Fifine K688 AM8, Razer Seiren mini, Razer Seiren X and more.
Compatible for 1/4" interface MIC
For Blue Yeti Nano, Elgato Wave 3, Elgato Wave 1 and more.
Upgraded Clip for Diameter 1.26" to 2.28" MIC
For SAMSON Q2U, AT2020, AT2035, AT2040, NW-700, NW-800, Fifine K669B,MPM-1000 and more.
minaz
Reviewed in the United Kingdom on February 5, 2025
I’ve had it for a few weeks and it’s been great to have. I recommend it for people who do not have space to attach a mic arm to their desk it takes no space at all and you can move it around and out of the way as you would a normal mic arm. Great value for money too.
Collin G
Reviewed in the United States on January 4, 2025
I have the original heavy/clunk blue yeti that weighs quite a bit. When I am not using my mic I will turn it away so that it is facing away from the side of my desk. I have found that the base plate that the mic stand has is not heavy enough to offset the weight of the mic I own when doing this and it will tip over. I have solved this problem by sliding the baseplate under one of the legs of my desk so that it is no longer able to fall over when doing this. Will keep the five stars since it was such an easy fix. Just be weary if you have a heavy mic so that it doesn't fall over and bust a hole in your wall like it's trying out to be the koolaid man.
Amanda
Reviewed in the United States on January 27, 2025
Has all the adapters to hook up my Blue Yeti Microphone to it. It's sturdy and good quality. It doesn't tip over very easily, it stays standing. Super happy with this purchase!
D3monicWolf
Reviewed in the United States on January 14, 2025
A really nice stand at a very reasonable price. Very easy to assemble and is not as bulky as I thought it would be. Easy to adjust without worry of it falling apart and it holds my blue Yeti very sturdily without falling like others. All an all a mic stand that does what it's supposed to do and does it fairly well. My only complaint about it would be that it's base plate seems to be slightly too small for the stand itself and it definitely wants to fall over at most angles adjusted left or right, but simply placing a heavy object on it seems to have fixed that problem.
Jameel
Reviewed in the United States on June 10, 2024
This mic stand comes with all the necessary adapters to attach a shock mount or however you want/need to set up your mic, as well as a wind screen that fits perfectly. The range of motion is great but you have to know where you'e going to place this thing depending on the shape and size of your desk. My only complaint is I wish the base was maybe 20 pounds heavier - it jostles around a lot when moving the microphone arm just through normal usage.
FreDDos
Reviewed in France on March 9, 2024
La qualité est au rendez-vous ! Plateau suffisamment lourd pour une excellente stabilité notamment pour les micro de studio d'enregistrement plus lourd que les micros de Seine et bien le pied est stable le bras articulé est très maniable le tout est facile à monter en moins de 2 minutes votre pied est sur pied prêt à l'emploi
John C. Yowell Jr
Reviewed in the United States on December 4, 2024
I needed a mic stand that can support 2 mics, and can quickly and easily moved from seated to standing positions. This works perfectly. The stand base is perfectly designed to hold the weight. The boom arm design could be built more heavy duty, but for the price point I am extremely happy. The boom keeps my microphones at the same angle from sitting to standing position! That was an amazing surprise. It would be great if the company would offer this in it's current build and then one that has heavier materials with more solid tightener for the lock. And added cable routing. I'd be happy to pay double for the quality. At this price I will be happy if it holds up for a year or two. Setup was simple. The design is flawless.
Jess
Reviewed in the United States on December 3, 2024
The mic stand has reliably been holding onto my Blue Yeti for a few months now. Anyone who owns a Yeti knows it is HEAVY and this mic stand is doing an excellent job holding it. The base could be a little longer, but that is not what I would consider a design flaw so no stars removed. I do have one of my hand weights on the base because I have the stand leaning pretty far forward and it was leaning a little bit. Easy and barely noticeable.
Stefano R.
Reviewed in Italy on December 14, 2024
PERFETTO per il mio UTILIZZOUsato per occupare poco spazio dietro un pianoforte digitale appoggiato al muroAltezza perfetta e perfettamente orientabile in tutte le direzioni.Ottima stabilità , la base bassissima passa perfettamente sotto lo stand del pianoforte e quando non lo utilizzo posso orientarlo a filo del muro.Prodotto veramente ben fatto , robusto e stabileUtilizzato con microfono Shure SM58Sono molto contento del risultato ottenutoLo consiglio sicuramente per chi ha poco spazio e non può utilizzare modelli da tavolo con fissaggio a morsetto.
Cody.v
Reviewed in Australia on November 26, 2024
Personally it works great if you can't get one of the desk clamp mount arms but it's not overly stable to I reccomend getting something heavy to put on the base and when going to adjust my mic side to side the screw that hold it in keeps comming loose so I have to disconnect my mic to spin it one direction to adjust it without loosening it but it's still a good product if you're in a pinch
Louvie Tucker
Reviewed in the United States on October 26, 2024
Saw a review saying the mic clip doesn't work with Yeti mics. And they are correct. It doesn't. That's why it comes with an adapter and instructions.Anyway, putting this together was straight forward and took less than 5 minutes. The base has a nice weight but the whole thing can still be tipped over with some force. Honestly not a problem if you're not leaning or tackling the thing.Tested the stand with two of my mics, the Blue Yeti and my Trust mics. Was I nervous suspending my not-so cheap mics 4 feet off the floor? Yes! Did the mic stand hold the mics? Yep! Do I like setting up the pop filter? Nope but to be fair, I'm an amateur and still learning the best ways to set up other accessories.If you're looking for a decent mic stand for your usb mic, I recommend this one.
S.Hibert
Reviewed in Germany on October 24, 2024
Alles Super.
Jose Bozo
Reviewed in the United States on January 9, 2024
I had a difficult situation where I needed a mic arm, but my desk was too thick for the traditional clamp. I considered mounting the arm into the desk or wall, but I was afraid of messing it up and I have no drill. I had also found a different floor stand, but the base was too wide and would've gotten in the way of my door. This however, solved all of those issues by having the base hide mostly under my desk. It's still sturdy enough to hold my Blue Yeti X off to the side without falling. The only issue I had was while moving the arm, the stand teeter-tottered a bit. I put some extra weight onto the base, and now I can move the arm without any issues at all. Definitely recommend to anyone having similar issues as me, surprised that this only seems to have Vine reviews.
Recommended Products