Great set. It has been working like a charm for half a year. Easy to install.

Works well! Easy to change keys in less than a minute. Highly recommended!!

Easy to install; easy to rekey

Looks great, easy to install. I like that I can use any key to rekey the lock. Built well and should last for years. Overall value is great. Much cheaper than the hardware stores. And it’s a trusted brand

Lock looks nice and instructions are adequate. Bought to replace an old Gainsborough lock and deadlock that sits flush over the face hole cut in my old (jarrah) front door.What you cannot see in the product images on Amazon is that the Kwikset deadlock has an inner metal lip that has to fit inside the hole! It didn't fit: too big (see above). So back it went. Bought a new Gainsborough deadlock ( more expensive).The Kwikset doorlock sits flush over its face hole and wasn't an issue.If you have a new door, it doesn't matter, just cut the entry hole to the right size. For an old door, you have no margin for error ! Deadlocks like the Gainsborough are much more forgiving as it is physically larger and covers pre-existing face holes of different sizes.

Great value for the money. It was easy to install and matches my other door hardware. Good build quality. It has smooth lock functionality. Best part is that you can code it to new/other keys. And a brand you can trust.

I installed three sets of these locks which was very quick and straight forward. I love the smart key function for changing keys quickly. My only gripe is the deadbolt knob is somewhat flimsy feeling, but hey they're affordable and overall pretty well built.

The Kwikset Satin Nickel Tylo door knobs have been a great upgrade from my old lever handles. I switched to these because my toddler could easily open the lever handles, and I wanted to update from gold to nickel knobs.Pros:Easy to Install: The installation process was straightforward and hassle-free.Stylish Design: The satin nickel finish looks modern and sleek, enhancing the overall look of my doors.Secure: These knobs provide better security, making it harder for my toddler to open the doors.Cons:None so far: These knobs have met all my expectations.Overall, the Kwikset Satin Nickel Tylo door knobs are a fantastic choice for anyone looking to improve both the security and aesthetics of their home. Highly recommended!

I picked this product because of the anti-bump feature and the re-key capability, the instructions are embedded inside the plastic wrap, not sure why people couldn’t find it, or heard of google search.It is so easy to install, obviously with the right tools.If you are retro-fitting it into existing door there may be adjustment to be made if the previous installation were not done in the standard way. I have seen complaints about people struggle to put the screws on 😂, just put the screws on both side by hand, then slowly tighten one side by a bit and move to other side a bit using a screw driver, keep each side loosen while keeping the plate back to have some room for the screw driver to make contact with the screw, don’t screw one side all the way in while leaving the other side loose.If you are not capable doing it yourself, just hire someone. Took me under 5 minutes to replace an existing lock.

Fácil de instalar

So disappointed. Received the lock with marks and scratch .at the end I install everything , The keys doesn’t match with one of the lock. So I have to uninstall the new locks and put my old locks back. Now I have to drive to post office to drop it off and return. Just wasting my time

I bought this Combo set of two different Kwikset Smart locks because the keys disappeared to my 20-year-old set of the combo Kwikset Smart locks that came with my house 20 years ago and otherwise have worked fine. Each lock had been installed on a different door. This new Combo set is quite similar to the 20 year old set, but the old set appeared at least a grade or two up in finish and more robust/sturdier in feel and looks; however, the old holes in the doors necessary for each new lock to be installed were an identical fit. The new set's info says its safety grade is "ANSI/BHMA grade 3 certified" which is the lowest of their 3 grades. Theoretically #3 tests without failure for 200,000 rotations of the mechanism (the other two are #1 - 500,000 and #2 - 300,000 respectively.) I figured we'd open each of those doors at the most perhaps 1,200 times during the next 20 years, and further, I could get these new locks overnight from Amazon at a decent price.This Combo gets only three stars overall. Initially, referring to the lock you see on the Combo page with a knob and a key slot in the middle of it for the outside of the door, and for the inside of the door a similar knob but with a twist-bar in the middle that opens the lock with a twist, this was the setup that had several issues that cost it stars. Here's the narrative:1. The Combo's new spring latch-mechanism that holds the door shut fit exactly in the place of the old one, but it stuck at the in-position when the latch was turned in or pushed in, which made it useless because it wouldn't spring back into the hole to hold the door shut. So I put the old latching mechanism back in which worked fine, and the new knob's turning mechanism fit through its middle hole exactly; thus, the old latch continues its duty.2. Both the 20-year- old and the new knobs still had identical mechanisms for screwing the two long Phillips screws that connect the front knob to the back knob so they can ultimately be tightly pulled together on each side of the door. But here's the annoying and aggravating rub: Kwikset for decades now has been using a "notch system" on this particular knob/lock system for at least 20 years. I and other reviewers call it the notch system because of the way Kwikset engineered the coupling of the outside knob to the inside knob. It's a two-screw coupling system that you put together by first screwing the two long Phillips screws a little way into the inside of the front knob, leaving the screw heads sticking out for slightly more than an inch for the next part of this sadistic operation. Then you stick the front knob into the door hole and through the hole in the latching mechanism and hold the front knob there with one hand. Then you put the back knob into its hole using the other hand and here's the rub. On the back knob's outside plate there are two holes through which one sticks a screwdriver to screw the back and front knobs tightly together, and -- THEN it dawns on you when you look through those screwdriver holes in the back knob's outside plate, presuming you first have both the front and back knobs in the top-side-up position so you can see the Phillips screw heads through what are now morphed into four holes because you should be looking through BOTH the back knob's outside plate and also the matching holes in the inside holes in back plate fastened to the inside of the back knob. Stay with me. The Phillips screw heads are going to be under that inside plate, not on top of it. So now you're wondering how you can tighten the screws so it will draw the front and back knobs together, as you simultaneously mumble "What the ...." Then, presuming you haven't decided to send it back and instead decide to examine the whole thing for some unknown period of time trying to convince yourself that no one would create such a numb-skulled way to fasten the knobs together, you realize that right where the two inside holes are, there is a raised slip-in notch for each screw in that inside back plate. Their purpose is for you to slip those Phillips screw heads into and on top of those raised notches (before you start tightening those screws). You ultimately find the previous sentence is accomplished by a very firm coordinated turn, one knob in each hand, the front hand holding that front knob steady and the back hand doing the twisting of the back knob, but only after first turning the notches a little to the side so the screws can then slip into those raised notches when you execute that firm back-knob turn (which often produces a nice click when done successfully). But there's more before you execute the twist: To execute that twist successfully, BOTH screw heads need to be at EXACTLY the same screw-length sticking out of the front knob, that inch+ or so, and each screw head needs to be in EXACTLY the right place (and same pressure on each) in order for them to slip and click into their notches properly in tandem at EXACTLY the same time. I presume the average time for trial and error and then making that happen successfully is 20 to 30 minutes, because you may repeatedly get one notched and the other still going under the plate without notching, until you get it just right. In any event once you've accomplished that, you aren't finished. Then get a moderately long and thin Phillips screwdriver because you'll be tightening at an angle as the knob's circumference hampers your work. Further, you can only turn each screw alternately a little at a time so you don't pop one of the screws out of its notch because it got too catawampus relative to the other screw. If you do not routinely do these installations for a living, after you've hit the success point, and if it wasn't blind luck, you've mastered this and you'll probably be able to do it in your sleep. I speak of "blind luck" because there is very little space for you to look between the knob and the door to see what you're doing, but you can see a little and it helps. Patience is truly a virtue.3. Now the next reason it gets only 3 stars. While tightening up the knobs against each other on the door, after I was about three-quarters or more finished, the twist bar in the middle of the inside knob simply popped out of the knob as I tightened, leaving a small hole where the plastic "straw" was that held it in there. Trying to push it back in didn't work, but the rest of everything else worked. Fortunately, that setup was installed on the door of a small storeroom of mine and it's highly unlikely anyone could lock themselves inside the room -- there's simply not enough room for both a person of any size and all the stuff that's jammed in there.Now, here are the things that helped it, taken as a Combo, achieve 3 stars.A. The other locking device in the Combo (for a side door of the garage), the new Kwikset deadbolt which uses only a key locking mechanism on the outside of the door (no knob) and a reasonably robust turn-bar on the inside of the door, also fits perfectly all the previous holes from its 20-year-old predecessor. In comparing this deadbolt's system to the first part of this Combo the "notch system," here's what underscores the nonsensical (perhaps idiotic) notch system used in the first (storeroom) system above for fastening the Phillips long-screws vs. the system used on the garage door deadbolt lock: The (garage) deadbolt locking mechanism also has (and had 20 years ago) two long Phillips screws to pull the front and back mechanism together; however, it is not the notch system, but a much simpler setup. The two long Phillips screws are simply put through the two screw holes in the inside turn-bar plate and then, still simply, screwed into the two "normal" screw receptacles in the sides of the deadbolt key mechanism which also pulls in the outside back plate when the screws are tightened. It takes less than a minute to screw in both screws, tightening both sides of the door. Some version of that is how every other type of Kwikset Smart Key lock I've ever had, which has been a number of sizes and uses, except for the notch system on the storeroom door. The at least 20 year old "notch system," which I imagine customers have been complaining about since the day Einstein convinced Kwikset it was a good idea (apologies to Dr. Einstein), seems to me to serve no convenient purpose in the world of today's technology. I can't think of reasons why the company would continue the "notch system" in today's world unless they are stuck with a bunch of them they're trying to get rid of them (I can imagine it now, "Hey, let's try pairing them with a lock that won't be so aggravating. We can call it the 'Combo' ." But shuffling them off on unknowing do-it-yourself customers makes it appear that the customer comes second, particularly when the norm, particularly for do-it-yourself customers, is simplicity.B. Notwithstanding the comments above, the Kwikset Smart Key change-key setting system may well have been invented by one of Einstein's ancestors. I've changed quite a number of keys on Kwikset Smart Key locks over the years, including the two Combos above, and if you PAY STRICT ATTENTION TO THE DIRECTIONS it's unbelievably simple, quick, useful and works like a charm. I've never had a failure with it.I normally buy my locks at Home Depot or similar stores and have never had a problem with any of their locks including Kwikset. However, as food for thought, some of the reviewers (1-3 stars) commenting on this Kwikset Combo seem of the opinion that the Kwikset locks sold on Amazon are of inferior manufacture, and are seconds, returns or knockoffs. I'm wondering if there's some truth to that and/or whether Kwikset locks have slowly degraded in materials and manufacturing practices over time. Even though I kept them and was able to use this Combo for its intended purpose, it definitely did look to me to be inferior to the quality I've bought at, e.g., Home Depot. This is my first experience buying (unwittingly) and installing a "notch system" lock door knob (I'm actually amazed they exist) and I'll never buy one again. Further, I'll dissuade anyone who asks me about buying one.One more thing. This was labeled "Amazon's Choice." I've noticed at least over the past year or more that a number of items with that label are mediocre at best in my opinion, and Amazon should get back to putting that label only on the best items because I think that many folks are beginning to ignore that label and starting to think it's all about money rather than quality. In short, I think "Amazon's Choice" is becoming a red flag, not a label of the best.

Ya tenía otras cerraduras de esta marca y compré está para acceder a más lugares en la casa con una sola llave, la perilla es de buen material aunque más pequeña que el promedio , bastante suaves para abrir y la llave gira sin esfuerzo, las conseguí a buen precio y estoy satisfecho con el producto, ya tienen 3-4 meses instaladas y aún se ven como nuevas.