Your cart is empty.
Your cart is empty.Product Description
John France
Reviewed in the United States on March 18, 2024
Came with a couple of extra smaller tips, they could come in handy. And one did, I had to modify one of the smaller tips to measure a cut I made in my mill. The cut was only 4.5mm deep, and 5mm wide, so with the boring head in the way, I had to modify a tip. But it worked perfectly for that measurement. And no, I didn't want to move the cylinder I was machining out from under the boring head to measure it, because even with a DRO, I didn't want to take the change of it not going exactly back in place if I had to do more cutting.
fabre olivier
Reviewed in France on November 6, 2024
Bon produit
Harebare
Reviewed in the United States on November 30, 2024
this is a great depth gauge tool for price and accuracy.
Outtahere100
Reviewed in the United States on April 24, 2024
Well made, good price, well packaged, works like it should - can't ask for much more.
Michael Gunn
Reviewed in the United States on December 17, 2023
I do beverage can seamer setup and wanted to check my countersink depth on aluminum cans without having to go to the lab and wait for the results from the girls. We use a PC based Kuhnke digital and optical check system, which is great and accurate (when used properly) but crashes constantly. This was the only reasonably priced option I found, claiming 0-1 in. and off-center gauge position. The gauge is nice, but will NOT work as delivered. With supplied needle tip it cannot be zeroed when mounted on included fixture, the screw in gauge holder is too short. I made a 3/4 in spacer for the adapter to screw into and Tig welded it to the offset hole on the included fixture. Now it can read from true flat to csink depth correctly. Wish it was available in .0001 res. like the lab uses, but gets me within spec. Excellent price and quality, comes with extensions and different tips to measure depth of 6 inches, extra battery and plastic box. At probably 1/10th the price for the one the lab uses.
Customer
Reviewed in the United States on March 15, 2021
This was a gift. My friend is very happy with it because it saves him a lot of time. Digital read out is great for a person not familiar with other formats. The idea of being able to zero at other points saves a lot of time and calculating.
pepek
Reviewed in Canada on February 1, 2021
the depth gauge is well built -- only thing to improve the gauge would be to have it backlit to make the face easier to read from any angle -- use it to measure bearing saddle depths on differentials, so far works really well.
Jason
Reviewed in the United States on January 19, 2020
Dead-on accurate against my Kreg router table setup bars; I tested 1/2", 1/8", and 5/16" .I have two complaints: the first is that the read-out is very difficult to read unless you read it straight on (see pictures); I wish it had a back-light to add contrast/readability. The second is that the case isn't designed very well and some of the tips get lose and you can inadvertently turn on the gauge when closing the case because there's very little space between the lid of the case and the on button; not a big deal because I plan to make my own case for it.
christopher smith
Reviewed in the United States on October 9, 2018
Others have written that their battery was dead upon arrival, having to install the second battery supplied. Apparently the folks at IGaging have read the comments and made the necessary changes. When I received mine both batteries were separate from the indicator so that there was no possible way for them to discharge while in storage and transit. I HATE using and reading regular depth gauges and usually would use a digital caliper to take a quick measurement of the rod instead of reading the instrument. With this tool I can take measurements in a fraction of the time it took me previously. The unit also has a HOLD button that allows for the reading to remain static (unchanged) until the next reading is made. The price is MUCH lower than the other competitors as well. A MUST HAVE!
Neversatisfied
Reviewed in the United States on April 7, 2018
I am a machinist and bought this for the added flexibility over a traditional depth mic. So far I have been impressed with the accuracy, repeatability, and flexibility of this tool. Most of my tools are Mitutoyo and while this obviously lacks that quality feel, it works good and costs far less. Very pleased with this purchase.
Recommended Products
$44.95
$ 23 .99 $23.99