Your cart is empty.
Your cart is empty.Product Description
Anonymous
Reviewed in the United States on January 4, 2025
The plate is good and provides a nice finish texture. But, you need to have a glue to help stick to the plate, especially smaller parts. You also need to be careful and let the plate cool and make sure your nozzle is not making contact because the coating damages easily.
Wombat37
Reviewed in the United States on June 5, 2024
Using a good print bed surface is critical to getting good results from a 3D printer. I’ve tried several different types of bed plates and tend to favor the PEI-coated steel plates that are held in place by a magnetic pad glued to the print bed. I find these plates give good results – they are easy to install, remove and clean. This new plate from Wefuit is stated to have a PEO coating on one side and PET on the other. Both surfaces are finely textured with attractive patterns that appear on the printed parts – giving a very attractive finish. Other plates I’ve ordered have notches cut into the back of the plate – presumably to help locate the plate on some other Creality printers. I use a Creality Ender 3 Pro printer which doesn’t use these notches so I can use the whole area of the plate. What’s particularly notable is the 150°C temperature limit claimed – this is much higher than any other plate I’ve used and so it will be interesting to see how this fares with nylon and polycarbonate filaments. No magnetic pad is included, which is great because I have a collection of these from previous orders of similar plates, so why should I pay for more? I realize that the magnetic pad I already have on my printer may not tolerate the 150°C limit achievable by the plate. The Amazon listing suggests that the plate be used with PLA, TPU, and PETG filaments so my first trial was with Overture ABS 😊 I used the PET surface for these first tests and I found that at 100°C, the ABS exhibited poor adhesion. I applied a thin coat of PVP gluestick and this fixed the adhesion problem completely – and the textured pattern still made it through to the prints. The prints were firmly held onto the plate until it had cooled and then it was easy to flex the plate to pop off the prints. I'm pleased with this product - it works well and gives great prints.
A. Mckinney
Reviewed in the United States on June 26, 2024
I really like this build plate. It correctly adds a nice texture to the bottom of any peice i'm working on. It fits perfectly and is easy to use.I would note that this is PET so you can dent/scratch/damage it way easier than a glass build plate. Please keep that in mind and be careful not to screw up your offset and gouge it.
Scrimshaw
Reviewed in the United States on May 29, 2024
This is a very cool PET print bed that looks like it has a cool carbon fiber style texture. The texture is different on both sides. Most of the time I don’t care about the texture of the bottom of my prints, but sometimes it’s a visible surface that you want to look good, and my PEI build plate just leaves too rough of a texture and it doesn’t look good. Check out my picture of a model piano top that I wanted to look nice, and this build plate really made it pop. I’m pretty happy with it.If you already have a magnetic print bed, this just sticks right on top of it. This does NOT come with the magnet, so you already need to have a magnetic print bed. I put this on, did a quick re-leveling, and found that I also had to change the Z-offset of my BL touch by just 0.1mm, since this build plate was just a bit thinner than my last one. Overall, very easy and no problems with surface adhesion or anything (using just PLA so far). It leaves a cool texture on the bottom of your prints. 5 stars!
BigL
Reviewed in the United States on May 28, 2024
I wanted to try a carbon fiber texture build plate as I never used on before so I bought this hoping it would fit my Flashforge 5m PRO and it fits perfect! I printed a handle the white on in the pic because it doesn't come with a handle but has a spot for it.The Textured PEI side is gold and prints stick great. The Carbon fiber side is smooth but leaves a nice CF look to your prints. I did not even use any glue on the bed and used PLA and it stuck perfectly On both sides!Remember when changing build plates to adjust your Z offset before you print anything. Each build plate is a different thickness and you don't want your nozzle to dig into a new build plate. :)Cant go wrong with this plate its a good price and works great. It is .8mm thick too so is pretty beefy not thin.
Troy Sanders
Reviewed in the United States on December 6, 2024
great
Ryan B.
Reviewed in the United States on December 30, 2024
The media could not be loaded.
Vasco Canaday
Reviewed in the United States on October 22, 2024
So the rough side definitely works every time, no issues at all. The print quality is rough and textured obviously so it's something to keep in mind. Adhesion on the smooth side is uncertain. You have to get a really close squish, more than you should, for it to stick well but then it really sticks. So it can be difficult to get the first layer right. It does fit perfectly on the ender 3, and is super easy to use. It just sticks on and pops off. Downside is that the delivery man stuffed this thing the mailbox and it was kinda folded like a taco for a few hours before I got it out. So shipping in just a bubble mailer may not be the best choice, because this thing is permanently warped. Luckily the magnetic bed and some clips is enough to make it lay flat.
Recommended Products