Your cart is empty.
Your cart is empty. Feature:
PEI Sheet Install: (please Cut off the extra corners by yourself） The Polyetherimide sheet comes with strong adhesive already laminated to the PEI. Apply the PEI with slight pressure and at an angle to prevent and minimize air bubbles. Once applied set the print bed to 60C and apply pressure evenly across the PEI in a sweeping fashion to firmly set the adhesive. Please use a towel to avoid getting burned. Level the bed and set the height of the nozzle before printing.
PEI Sheet Use：
Thickness: 0.17mm
Compatible with PLA PETG TPU and other most filaments,not recommand ABS.
When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold.
PEI Sheet Maintenance:
Clean in between prints with isopropyl alcohol and a lint free rag.
Acetone can be used instead of isopropyl alcohl, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
Sticker Base:
it is adhesive-backed for easy installation
Package Includes:
1X 160x130mm Steel Spring
1X 160x130mm PEI
1X sticker Base with adhesive
Gretchen
Reviewed in the United States on February 15, 2025
I debated getting a new bed for quite awhile because I was nervous about removing the texture from my original bed and then not liking the new one. However, now that I have this bed, I wish I would have just gotten it earlier. Prints adhere without the need for glue or rafts. Most prints remove easily even without removing the top plate and flexing it. For prints that don't release easily, the top plate can be removed, flexed, and the prints pop right off.This bed is two parts. The black part is a magnet with adhesive on one side. The adhesive will need to be stuck to your buildplate. The gold part is a thin metal sheet which can be removed from the magnet and flexed to remove prints. The bed fits very well on the MP Mini Select V2, but there is not much room for error when installing it. If the magnetic part of the bed is not aligned properly, it will cover one or more of the adjustment screws.
muzzled
Reviewed in the United States on July 8, 2024
Used glass on top of the original MPSM v2 buildtak for years, Elmer glue to help adhesion etc. This is way easier! Very little force and the parts detach readily while the plate is still warm to the touch. Completely removed the original buildtak with Goof-Off and a paper cutter blade, then replaced with the magnetic vinyl base that came with this. Still experimenting with first layer temperature, it seems 65 does the trick. The base of the print is matt but very smooth still. I am loving it now how easy it is to take the top plate off and remove parts without ever feel like you might break the glass or your hand.
Rodrigo Vera
Reviewed in the United States on March 29, 2024
Great product, was a great replacement for my mono price select mini v2. I could never get glass beds to work and this one works like a charm.
Linda Gendron
Reviewed in the United States on February 26, 2024
Well the first problem was that the magnetic part didn't quite fit on my mini price select V2 it covered the rear screws so I had to actually grind off the corners because taking it out off to move screws wasn't that great. The other thing I found was that I needed a smaller clearance between the nozzle in the platform or else the adhesion was not great. What I had to do was level it out to within a couple of thousands print out hey 8th of an inch border of a box 4 inches and keep tweaking the screws slightly to reduce the gap until it stuck all around. I will see how it does and I can always go back to my painters tape which gave me great adhesion and not as fussy as this platform.UpdateAfter getting it to fit better on my bed and spending a lot of time working on getting it level, I really like this device. It does save me a lot of time not having to tape my build plate. So far I have no had any problems with the print not adhering after spending a lot of time getting it level. I had to place it closer to the build plate that when using tape, I know feel that it is a good update and has made my printing easier. PS I used a dial gauge to get a more precise level.
Mr fobs
Reviewed in the United States on April 18, 2024
I saw a lot of reviews saying they were missing the pei sheet to stick on. I thought I was too, but I looked closer and it is on there, just very thin and almost the same color as the steel. It is also smooth pei. Other than that, my only complaint is the magnet could be a little stronger.
Mike
Reviewed in the United States on January 20, 2023
Did not receive the build plate, only the sticky base.
Loykasek
Reviewed in the United States on August 12, 2021
Excellent product for the Monoprice Maker Select Mini v2. The factory build plate that is taped to the heat bed is not as easy to get parts off of the sheet.This magnetic upgrade makes removing the printed parts so much easier. Also, since there is no prying of stuck on parts, the bed should hold its level indefinitely (I would assume).
Kindle Customer
Reviewed in the United States on April 12, 2021
Bought this for my mini select v2 and it fit perfectly. Lowered the build plate and leveled. The first print was terrible. This thing needs to be leveled while hot, after that the prints were good. No need for supplemental adhesives. I found that just wiping the plate off with a microfiber cloth produces excellent results . The plate goes on and off easily, and the parts snap right off.
Recommended Products
