Your cart is empty.
Your cart is empty.Product Description
thx
Reviewed in Canada on March 3, 2025
Excellent plate for bambu x1/p1 printers. Leaves nice pattern on build plate side of print.
thx
Reviewed in Canada on March 3, 2025
Excellent plate for bambu x1/p1 printers. Leaves nice pattern on build plate side of print.
JNKing
Reviewed in the United States on January 17, 2025
Prints look great and stick well.No issues printing.
JNKing
Reviewed in the United States on January 17, 2025
Prints look great and stick well.No issues printing.
T
Reviewed in Canada on September 25, 2024
awesome effect. takes a day or two for the rainbow to really bind to the print otherwise if you touch the rainbow you can rub it off your print easily. Hard to get prints to stick tho sometimes but its easy to see where there is grease on the Plate if your print isnt sticking
T
Reviewed in Canada on September 25, 2024
awesome effect. takes a day or two for the rainbow to really bind to the print otherwise if you touch the rainbow you can rub it off your print easily. Hard to get prints to stick tho sometimes but its easy to see where there is grease on the Plate if your print isnt sticking
Michaela J
Reviewed in Canada on September 16, 2024
I purchased the variation that has the gold PEI sheet, and the Stary Night on the other side of the plate. After reading some of these reviews it seemed like it would be a good alternative to the OEM Bambu Labs plate. However, sadly, it is not.The stary night pattern part of the plate hardly transfers over to your print. I tried multiple different settings, but the overall transfer was weak and hard to see. The prints did stick, after ensuring that I had tweaked the correct print bed settings within Bambu Studio.The PEI sheet started off promising as I had no issues with adhesion and the prints did not lift. I was sure to follow proper print bed care, and cleaned it as the description of the product said. But after about 6 large prints I started having adhesion issues. Certain parts of the bed do not stick at all. Almost like a coating has been removed, but the plate itself looks brand new. I thought it might be dust, or oil from my hands after removing a print, so I deep cleaned the plate and heat set it before trying again. But the same issues in the same spot of the plate all over again.It doesn't matter what model I'm printing, or Filament as I've tried about 7 different rolls, from different brands and tweaked the settings within Bambu Studio near a million times. Nothing will stick.This is super disappointing as I was hoping to be one of the lucky few reviewers that had good luck with this product. I can't recommend buying this overall. After not even a month of owning this plate, with low print hours, it's already failed. Comparing this to the OEM Bambu Labs plate that lasted 14 months with THOUSANDS of hours of print time and proper care.
Michaela J
Reviewed in Canada on September 16, 2024
I purchased the variation that has the gold PEI sheet, and the Stary Night on the other side of the plate. After reading some of these reviews it seemed like it would be a good alternative to the OEM Bambu Labs plate. However, sadly, it is not.The stary night pattern part of the plate hardly transfers over to your print. I tried multiple different settings, but the overall transfer was weak and hard to see. The prints did stick, after ensuring that I had tweaked the correct print bed settings within Bambu Studio.The PEI sheet started off promising as I had no issues with adhesion and the prints did not lift. I was sure to follow proper print bed care, and cleaned it as the description of the product said. But after about 6 large prints I started having adhesion issues. Certain parts of the bed do not stick at all. Almost like a coating has been removed, but the plate itself looks brand new. I thought it might be dust, or oil from my hands after removing a print, so I deep cleaned the plate and heat set it before trying again. But the same issues in the same spot of the plate all over again.It doesn't matter what model I'm printing, or Filament as I've tried about 7 different rolls, from different brands and tweaked the settings within Bambu Studio near a million times. Nothing will stick.This is super disappointing as I was hoping to be one of the lucky few reviewers that had good luck with this product. I can't recommend buying this overall. After not even a month of owning this plate, with low print hours, it's already failed. Comparing this to the OEM Bambu Labs plate that lasted 14 months with THOUSANDS of hours of print time and proper care.
Robert Levandowski Jr.
Reviewed in the United States on August 8, 2024
PEY type plates are novelties, and a lot of them on the market just don't work: they don't have enough bed adhesion to be useful.This plate, like other IdeaFormer plates I've tried, works. It's well constructed, and my builds had no problem sticking to the PEY side. The star pattern is attractive; certainly it'll be a favorite with tween daughters.Why not five stars? Well, it'd be far better if it came with printed barcodes for the X1C... on the textured PEI side if nothing else. And for some reason, unlike other IdeaFormer plates, this one didn't come with the instruction sheet telling you the essentials: clean with dish soap and brush before use, use the "smooth PEI plate" preset in Bambu Studio/OrcaSlicer for the PEY side. That'd make it perfect.But if Amazon let me give 4.5 stars, I would. This is absolutely a good plate to buy. It gives you a nice novelty pattern AND a spare textured build plate. Recommended.
Robert Levandowski Jr.
Reviewed in the United States on August 8, 2024
PEY type plates are novelties, and a lot of them on the market just don't work: they don't have enough bed adhesion to be useful.This plate, like other IdeaFormer plates I've tried, works. It's well constructed, and my builds had no problem sticking to the PEY side. The star pattern is attractive; certainly it'll be a favorite with tween daughters.Why not five stars? Well, it'd be far better if it came with printed barcodes for the X1C... on the textured PEI side if nothing else. And for some reason, unlike other IdeaFormer plates, this one didn't come with the instruction sheet telling you the essentials: clean with dish soap and brush before use, use the "smooth PEI plate" preset in Bambu Studio/OrcaSlicer for the PEY side. That'd make it perfect.But if Amazon let me give 4.5 stars, I would. This is absolutely a good plate to buy. It gives you a nice novelty pattern AND a spare textured build plate. Recommended.
Ryan Haagensen
Reviewed in the United States on August 22, 2024
This build plate works well and leaves an interesting pattern on the build surface side of your print that's smooth as glass. This water ripple pattern is a new one I hadn't seen before, but it looks great. Pics don't do it justice really. I had to turn my bed temp up slightly from what Bambu's smooth plate temp had programed (from 65 to 75)
Ryan Haagensen
Reviewed in the United States on August 22, 2024
This build plate works well and leaves an interesting pattern on the build surface side of your print that's smooth as glass. This water ripple pattern is a new one I hadn't seen before, but it looks great. Pics don't do it justice really. I had to turn my bed temp up slightly from what Bambu's smooth plate temp had programed (from 65 to 75)
MGarrett
Reviewed in the United States on December 8, 2024
I got this one to add some texture to some of my prints and it is awesome! To be able add a unique texture and pattern to a print with out changing the design is amazing! I will be getting more patterns!
MGarrett
Reviewed in the United States on December 8, 2024
I got this one to add some texture to some of my prints and it is awesome! To be able add a unique texture and pattern to a print with out changing the design is amazing! I will be getting more patterns!
Phantom28
Reviewed in the United States on December 11, 2024
Great holographic designs. I like that each side is different. Printed a headphone stand with a large base and design is clearly visible!
Phantom28
Reviewed in the United States on December 11, 2024
Great holographic designs. I like that each side is different. Printed a headphone stand with a large base and design is clearly visible!
Joe
Reviewed in the United States on December 10, 2024
When using this build plate make sure to keep plate temps in the 50ºC range for PLA. Keep the bed plate clean. I use glass cleaner to cut the oil and surface contamination. On the X1C make sure you follow the included directions for disabling build plate detection. This was printed without glue stick and I suspect using glue would reduce the pattern imprint.
Joe
Reviewed in the United States on December 10, 2024
When using this build plate make sure to keep plate temps in the 50ºC range for PLA. Keep the bed plate clean. I use glass cleaner to cut the oil and surface contamination. On the X1C make sure you follow the included directions for disabling build plate detection. This was printed without glue stick and I suspect using glue would reduce the pattern imprint.
Ken
Reviewed in the United States on October 13, 2024
If you are using this with a Bambu lab product that uses a laser to set flow rate and leveling it isn't the best product. The laser has a hard time reading the light pulses coming back from the laser which cause issues with how the printer sets the height of the nozzle.Looks awesome when it works but I would reccomend sticking around to make sure the first layer sticks before leaving it alone
Ken
Reviewed in the United States on October 13, 2024
If you are using this with a Bambu lab product that uses a laser to set flow rate and leveling it isn't the best product. The laser has a hard time reading the light pulses coming back from the laser which cause issues with how the printer sets the height of the nozzle.Looks awesome when it works but I would reccomend sticking around to make sure the first layer sticks before leaving it alone
Funovation
Reviewed in the United States on October 24, 2023
I had played with the patterned build plates before. They will imprint a bunch of lines in different directions and make the surface look faceted. It is a cool affect, but it is pretty easy to see how it is working. THIS, on the other hand, is pure magic!!! The plate is very colorful with rainbow dots and stars. If you shine an intense light from a flashlight, the effect is even stronger. But who knew it could actually be transferred to the bottom surface of the 3D print!!! This works great! At first I thought that it did not do it, but then under the right angle, the part sparkled with rainbow dots and stars. I tried clear at first-- it was ok-- but a bit hard to see. I then tried black and the pattern was even easier to see. My first print was not that smooth, so I adjusted my build plate a little closer to get a better smear on the build plate and the next one came out looking EXACTLY like the build plate!!! I was amazed! I handed it to several of my coworkers and they were amazed as well. We put it under a microscope and could not see any clues as to how it was working. The stars and dots just appear to float on the surface of the plastic. One thing we heard was that if oil from your hands gets on the surface, the pattern can go away. But, a soft cloth with Isopropyl alcohol takes the oil away and the surface was to completely covered in rainbow dots again. Now I think that I need to find a bunch of cool things to print where the bottom surface is the display surface! So cool! Maybe a communicator shirt pin….1st picture is a clear print, 2nd picture is with black and the 3rd was a close-up. It is really hard to take a picture of just how really cool this looks.Hope this helps.
Funovation
Reviewed in the United States on October 24, 2023
I had played with the patterned build plates before. They will imprint a bunch of lines in different directions and make the surface look faceted. It is a cool affect, but it is pretty easy to see how it is working. THIS, on the other hand, is pure magic!!! The plate is very colorful with rainbow dots and stars. If you shine an intense light from a flashlight, the effect is even stronger. But who knew it could actually be transferred to the bottom surface of the 3D print!!! This works great! At first I thought that it did not do it, but then under the right angle, the part sparkled with rainbow dots and stars. I tried clear at first-- it was ok-- but a bit hard to see. I then tried black and the pattern was even easier to see. My first print was not that smooth, so I adjusted my build plate a little closer to get a better smear on the build plate and the next one came out looking EXACTLY like the build plate!!! I was amazed! I handed it to several of my coworkers and they were amazed as well. We put it under a microscope and could not see any clues as to how it was working. The stars and dots just appear to float on the surface of the plastic. One thing we heard was that if oil from your hands gets on the surface, the pattern can go away. But, a soft cloth with Isopropyl alcohol takes the oil away and the surface was to completely covered in rainbow dots again. Now I think that I need to find a bunch of cool things to print where the bottom surface is the display surface! So cool! Maybe a communicator shirt pin….1st picture is a clear print, 2nd picture is with black and the 3rd was a close-up. It is really hard to take a picture of just how really cool this looks.Hope this helps.
Recommended Products