Shopping Cart

Your cart is empty.

Your cart is empty.

Eastwood Epoxy Steel Aluminum Fiberglass Primer and Sealer Catalyst Gallon 1:1 Corrosion Resistance

Free shipping on orders over $29.99

$119.99

$ 55 .99 $55.99

In Stock

About this item

  • Fast Drying & Maintains Good Color Holdout
  • Mix 1:1 With Epoxy Primers 14760ZPA, 50244ZP or 50246ZP
  • Excellent Adhesion And Corrosion Resistance
  • Applied Over Steel, Aluminum, Fiberglass, Body Fillers, Existing Finishes
  • Approximate Coverage Per Gallon: 140 Sq Ft



Product Description

For use with Eastwood Epoxy Primers

WARNING:

Due to regulations pertaining to recycling, we are unable to ship this product to Alberta and Canada.

MIXING RATIO

After shaking/stirring primer, thoroughly mix one part primer with one part catalyst. No induction time is required with this epoxy system.

SPRAY GUN SETUP

HVLP Gun: Fluid Tip 1.4-1.8 mm Inlet Spray Pressure 25-30 psi

Conventional Gravity: Fluid Tip 1.4-1.6 mm Inlet Spray Pressure 45-55 psi

Conventional Siphon: Fluid Tip: 1.6-1.8 mm Inlet Spray Pressure 45-55 psi

APPLICATION INSTRUCTIONS

Eastwood Epoxy Primer should be applied in medium wet coats, with a 30-minute flash period between each (at 70 °F). Typically, one to two coats is enough to achieve the desired 1 mil. dry film thickness, though more material may be applied as needed. Additional build requires longer flash periods between coats. Epoxy primer may be top coated after approximately 30 minutes (wait 45-60 minutes after applying more than two coats), or up to about five days. After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.


federico j. morales
Reviewed in the United States on September 21, 2024
The product worked very well on the prepped rooftop of my truck that was severely rusted, but it worked out. Nice coats. Job was well done.
Richard Hoke
Reviewed in the United States on July 11, 2022
This is part B of a 1:1 epoxy primer, should be sold as a kit.
Kenneth jordan
Reviewed in the United States on August 25, 2021
Great primer I highly recommend it
Georgia
Reviewed in the United States on March 5, 2020
This is used in combination with the epoxy that Eastwood offers. Works great.
Mike Allison
Reviewed in the United States on February 17, 2020
Working great redoing bottom of my sailboat.
phdorgchem
Reviewed in the United States on April 2, 2020
Works as advertised. Measure carefully and accurately for best results. Do no go under or over but right on . Stir well but gently to avoid air entrapment. filter and spray with 1.7 mm tip or greater.
Recommended Products

$19.95

$ 9 .99 $9.99

4.8
Select Option

$29.76

$ 12 .99 $12.99

4.7
Select Option

$16.09

$ 7 .99 $7.99

4.8
Select Option

$14.99

$ 7 .99 $7.99

4.6
Select Option

$44.47

$ 20 .99 $20.99

4.4
Select Option

$15.88

$ 6 .99 $6.99

4.4
Select Option