Shopping Cart

Your cart is empty.

Your cart is empty.

Danco HYR460 HyrdroRight Water-Saving Toilet Tank Repair Kit with Dual Flush Valve, Includes Dual Push Btton Handle in Chrome

Free shipping on orders over $29.99

$29.19

$ 13 .99 $13.99

In Stock

1.Size:1 Count (pack Of 1)


2.Style:Kit


About this item

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE with 1.28 GPF toilets, toilets with 3″ flush valves, or Mansfield Brand toilets
  • FLUSH VALVE REPLACEMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids
  • DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.


Product Description

The Danco HYR460 HydroRight Total Repair Kit increases your toilet’s efficiency with an included Dual Flush Converter that will save water by reducing the amount of water used with each flush. The HydroRight will also help solve the most common leaking issue in toilets, a non-functioning flapper. The Dual Flush Converter sits vertically and solidly onto the flush valve opening to create a better seal and eliminate the possibility of leaks. No more leaky flapper, tangled chains or handles that have to be jiggled. The Total Repair Dual Flush Valve quickly and easily converts a standard toilet into a two-button, dual flush toilet. One button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper - the setting needed 4 out of 5 times. The second Full Flush button uses the normal amount of water for solids. Designed for drop-in installation, the HYR460 can be installed in without tools and without having to remove the tank. INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve. Danco is one of the largest plumbing repair, replacement, and remodel suppliers in the home improvement industry focused largely on empowering 'Do-It-Yourself' consumers with plumbing solutions that are as practical as they are affordable, giving your home a modern fresh appeal and renewed elegance. We provide stylish design-oriented innovative home solutions that are user-friendly to support and encourage customers to tackle home improvement tasks on their own - without the heavy price tag of professional services. So whatever your next home project is whether it is replacing faucet, toilet, shower parts, preventing clogs with one of our hair catchers, removing trim, flooring, tile with our Zenith trim pullers or removing a drain clog with our new Liquid Rhyno Drain opener products, remember “There’s a Danco for that” and search for Danco to complete your next DIY project.

From the Manufacturer

Next by Danco exemplifies a line of state-of-the-art plumbing repair parts that empowers the DIYer and Professional to do more than just solve the problem. Don’t just repair it. Improve it.


ST
Reviewed in the United States on January 24, 2025
Good product for an old toilet repair. Since it provides a new seal mechanism for the tank, you don't need to remove the tank to replace the bottom flapper seal, i.e., the unit provides a self-contained gasket within the kit.The two button flush is a nice touch but the water saver button doesn't really work with an old toilet that always requires a full flush. Still nice for toilet cleaning and using less water.The fill hose is not very well designed as it is flexible and will not lay down on the bottom of the tank as envisioned. I ended up using a rock to weigh it down so it stayed in place. A good design idea, but does not work as designed. Without the rock holding the fill tube in place at the bottom of the tank, it will lift up and spray water all over. I tried bending the hose to take the kinks out but had no success. The rock work well enough and maybe the tube will become more rigid and stay in place by itself over time. I guess you could also turn the water supply line valve down to reduce pressure and increase the tank refill time.
JustPanda
Reviewed in the United States on January 1, 2025
The Danco HYR460 HydroRight kit was surprisingly easy to install, even in my Mansfield toilet (despite the incompatibility warning), since the flush valve had been previously replaced with a normal aftermarket one. The instructions were clear, and the installation process itself was straightforward. I did encounter a minor leak initially, but this was easily resolved by adjusting the flush valve seal; I had angled it too much at first. While the plastic components feel a bit lightweight, they function well. The dual-flush system effectively reduces water consumption, and the split handle design is convenient, although my girlfriend initially found the buttons difficult to press due to her long nails. This was easily remedied with a small "push-stick." Overall, I recommend this kit for those seeking a simple and effective way to convert their toilets to dual flush and save water. 5/5.
Héctor Augusto
Reviewed in Mexico on December 30, 2022
Es un excelente producto. Funciona tal cual está indicado. En mi caso, el sapo de la descarga se atoraba y no regresaba a tapar la descarga, lo cual generaba una fuga de agua muy considerable y por lo mismo, un consumo de agua mayor (+ $$$$ pagada al servicio municipal de agua potable y alcantarillado). Se puede instalar en cualquier depósito, no se requiere que sea nuevo o que este preparado para este tipo de válvulas.Este es el 2do juego de baño que instalo. En ambos casos la instalación fue super sencilla y no requerí herramienta (solo para quitar la manguera de la tubería al deposito). En la 1er instalación me lleve aproximadamente 45 minutos. Ya en esta última fueron máximo 15 minutos.Los materiales de primera calidad y no se requiere desensamblar el tanque al inodoro pues ocupa la misma descarga. Recomiendo que lean bien las instrucciones de instalación y se familiaricen con las piezas.Si he observado una disminución del consumo de agua a raíz de la instalación y uso de este sistema. Inclusive hasta la sensación de desperdiciar agua de mas en cada descarga se ve reducida.
Average Guy
Reviewed in Canada on September 8, 2021
Toilet technology has come a long way! This was so easy to install and it saves so much water that it was a no brainer.I watched some youtube videos on how to install this and it literally took me 15-20 minutes to swap out my 20-year old valve in my most used toilet. There are plenty of water adjustments to get the perfect flush for a #1 and a #2. In my estimation, from looking at the water level in my reservoir, I'm only using a quarter of the water for a #1 flush and about 2/3 for a full flush.I tested it plenty of times in the last couple of weeks and the power of the flush is great with the water I mentioned above. I suspect this will save me plenty of money every month and pay for itself in a short time. Why didn't I do this before?!?!I would definitely recommend this product to anyone. It has a very good design that will fit most, if not all, toilets that were manufactured within the last 30 years or so.
Rick Macdougall
Reviewed in Canada on August 8, 2021
Leaks if you don't install it correctly but is easy enough to fix. Just spin the valve round on the exit point and press down until you get a good seal. After that, no phantom flushes or water loss. I am not a plumber and I got it installed without a problem.
Cliente de
Reviewed in Mexico on March 1, 2021
Substituye todo el herraje interno y funciona bien modernizando y actualizando el funcionamiento del inodoro, ahorra agua , evita fugaz al ser más exacto en el uso del agua .
Usuarios
Reviewed in Mexico on August 17, 2019
Por el precio muy bien funciona bien hasta ahora
pbk63
Reviewed in the United States on February 22, 2013
Have now had installed for 6 months in one case and 2 months in two others. Working just fine. One advantage to these systems is the white slide mechanism on the filler tube. You can slide that so that it will not refill after flushing. This is a big help if have to adjust the replacement for the flapper value but even bigger help when wanting to clean the toilet bowl. Can slide to stop flow, flush using the liquids flush button and then with the bowl nearly empty can clean the bowl thoroughly. Then release the slide and bowl refills normally. Big help vs turning the water off at the valve. Same is true if going on vacation or away for weekend and want to prevent possible toilet overflow as mentioned below. Features not mentioned in other reviews I have seen on the product but a big plus for it.This us update to earlier note. I have now installed three of these systems. The only issue I had was getting the flapper replacement installed so it did not leak. But once that problem was solved the system works great. One item I have not seen noted but important to me is that you can slide a white slide on the arm of the filler mechanism to lock it in place. Very useful if going on vacation or even away for weekend as it could prevent a toilet from overflowing as friends had happen a few years ago with major damage. Beats turning water off to the whole house as the major risk is from the toilets. System worth it just for this! Also when checking for leak you can mark level with pencil and lock the filler and then go back in a few hours and see if level has dropped. Likewise if you have to adjust the flapper replacement it is easy to do by locking the filler when water level is low and then twisting the large part off of the flapper replacement and adjusting to be sure no leak. After doing this can release to let water part way in and then lock again and mark so do not have to fill entire tank (or drain it). Thought these useful enough to pass along.I initially bought each of these separately so my review of the filler valve and the dual flush valve are under the individual parts except that I am only adding the comments above to the entire system link. I have replaced the innards of toilets numerous times over the years and found this system very easy to install. Only caution I would pass along is to read the directions and the warnings with some care before you attempt installation. I have for years used bleach tablets in the tanks and I note that they warn not to do this with their system. Each part of the installation has some simple instructions but important to read them to save yourself a lot of frustration. When I first installed the dual flush I did not follow instructions to put water over the seating valve and mark with pencil and let sit 15 minutes to be sure it was seated. As a result I had to go back and redo the installation. Once you have done an installation for one toilet doing others will be extremely easy. So far system is working very well but I plan to wait a couple of months before buying more and installing in my other toilets. If this works as well as I hope I will be using these from now on. Especially attractive to me is replacement of flapper valve and those of us with hard water tend to find build up of sediment and lime allows leaking of the flapper over time which can waste a great deal of water from a very slow leak that you may not realize is occurring. If I find problems with the units after installed a while I will come back and revise this review. As of now I can recommend this unit both for ease of installation and how well they are operating so far. Some of the problems I have seen in other reviews have yet to show up for me. If they do I will edit this review.
Recommended Products

$10.95

$ 4 .99 $4.99

5.0
Select Option

$23.97

$ 10 .99 $10.99

4.8
Select Option