Your cart is empty.
Your cart is empty.Product Description
Effortless Print Removal
Simply bend the surface slightly, and your finished print detaches cleanly without the need for scraping or prying tools.
Textured Suface Finish
BIQU CryoGrip Panda Build Plate allows your printer to display coarse texture at the bottom for a better printing experience.
ThatGuyWhoLikesStuff
Reviewed in the United States on February 23, 2025
Works very well for adhesion and a great replacement in comparison to the OEM textured PEI bed. While I like the aesthetics of the plate, it is a shame that the nozzle wipe on the rear wasn't accounted for by BIQU (maybe a silcone strip?). While using this plate, similar to the OEM plate, everytime the nozzle does a wipe before a print, it strikes off some of the plates coating. I've releveled my printer numerous times and know this is a common aspect however it's something I think BIQU could have worked to upgrade/incorporate!
bbuckner
Reviewed in the United States on February 16, 2025
Works great. All the reviews of people saying it doesn’t work must of got the smooth plate or cleaned it incorrectly every pla, and especially PETG print sticks great to the textured plate. I’d buy another one before a stock Bambu plate.
Oseriduun
Reviewed in Canada on January 7, 2025
Title says it all, this is the best build plate I've used across any printer. No adhesion issues, prints come off with a quick bend and a satisfying pop. First layer texture takes a little getting used to but I would definitely buy this again. I might even grab the glacier plate to expand my cold plate collection.
Mike
Reviewed in the United States on March 22, 2024
I have had my Biqu B1 SE Plus for a while now, and I really like it after dialing it in. The last thing I didn't like about it was the stock glass build plate. Don't get me wrong, the adhesion on the glass plate is fantastic, nothing moves, ever, even when you want it too. I'm sure there is a "sweet spot" with it because one or two times the print popped right off. The majority of the time I was using the scraper to pry things off and realized that eventually I'd break the thing.With that in mind I went searching for a better option. Now, I have more than a few printers and I've always swore up and down that i would never, EVER peel the film off of a sticky magnet and permanently attach it to a hotbed. So i ordered this simply because of the brand name, I assumed that at the very least it would fit the machine AND it looked thin enough I could probably just clip it to the top of the glass bed to use it. Also, no mention of stick on magnet!Soo I ordered it and another one that did come with a sticky magnet that I planned to throw away, haha. Anyway, as soon as I opened it I was unsure. It wasn't like the bendy plates on my Enders or my Anycubics. But, I'm desperate for a solution here. I threw it on top of the glass, bent the clippy things to hold it (kinda lol), ran the auto level, checked the z offset and hit print.I'm not gonna lie, I was blown away how well it worked with no effort on my part at all. Ran the whole print, pushed on the part as it finished and it didn't fall off. I finished my dinner and came back after everything cooled, the part lifted right off of the plate, no effort. I ran the part a second time and tried to push it off while it was running, it was stuck pretty good. I let it finish again and tried to remove it while it was still warm. It took a little effort, but not excessive. Keep in mind with the clippy things holding it, it was visibly not flat, at all haha. Of course this was my fault for the way I had it assembled, but it didn't stop it from working.So, I opened the other plate i had ordered and checked if the magnet was the same size and sure enough, they matched perfect. I had a quick internal dialogue about how "I would never" and then I peeled that paper off and stuck that magnet directly to the machine. Next I ran the auto level again, loaded a new g-code and sent it on its way again. Again, perfect adhesion. Once this thing was flat against that magnet it is even better!!Changed my whole philosophy and I'll never look back! I highly recommend this one and if you can find it with the sticky magnet included, buy that one!I'm actually curious to try the other plate I bought now (the one that donated it's magnet lol).
Ixi
Reviewed in Belgium on December 9, 2024
un de mes meilleur plateau, très bonne accroche du PLA, PETG et TPU sans apport de primer.Toujours en parfait état après quelques kilo de filament ( BLtouch est ton ami !)
Rl
Reviewed in Germany on October 17, 2024
Ich habe schon zahlreiche PEI-Platten auf meinem Sidewinder gehabt und nie eine gute Haftung bekommen. Mit der Biqu Platte habe ich eine perfekte Haftung!
Jonas Berntsson
Reviewed in Sweden on June 15, 2023
PETG sticks almost as good on this as on the smooth PEI sheet I normally use...but is getting a bit worn. Thin and both sides are coated. I like it!
Donald Kwietniak
Reviewed in the United States on January 17, 2023
I bought two of these to use on my Sovol SV06 because the stock one was too rough! These have a nice soft texture, PETG, PLA and PLA+ all stick well and release easily when the bed cools. It is a bit thinner than the stock one. Make sure to adjust your Z Offset! These are two sided sheets so you can flip it to print again before cleaning but in my experience there really isn't any residue left behind when removing model from a cool plate. The SV06 uses an inductive probe and these sheets work fine with it.
hcpookie
Reviewed in the United States on July 20, 2022
Works like a charm! I wore out my (factory) magnetic bed switching between PETG and PLA. So I tested this one out and I'm glad that I did! This surface will release almost on command. Flexible so you can release when the print finishes, or if you let it sit, the surface will cool and through tension differential of cooling, the print will simply pop off the surface on its own. When I let a print go overnight, the next morning I walk up to the printer and the print just slides off. No scraping, no work, no hassle. "It just works!"I do like the fact it is double-sided, so you can "gum up" one side w/ PETG or whatever and still have the other side to work with.I liked this so much I bought one for my other printer, and will add this to my "must buy" list if I purchase another printer! Yeah, its that good.
Isaí Martínez
Reviewed in Mexico on May 26, 2021
Se desempeña bien y deja un acabado atractivo en la superficie de las piezas. Lo único malo es que el recubrimiento texturizado se despega con relativa facilidad y la pintura azul se fue a los pocos días. La placa es de doble cara, por lo que se aprovecha al máximo el producto.Tiene buena adherencia con PLA, pero si se usa PETG, recomiendo habilitar el skirt o broma dentro del slicer para asegurar que no se despegue.
Woo H Lee
Reviewed in the United States on October 16, 2021
Great value. Super light compared to the glass print surface it replaced (mirror). So far, printed Inland PLA, Inland PLA+, Inland PLA Lite and Inland PETG. I believe all of the PLA has been rebranded eSun. After a quick leveling and z adjustment, got right to printing with no fussing. I've not had experience with PEI beds, but my experience with this bed sounds like the descriptions I've read for PEI beds. Namely, both PLA and PETG stick great with a warm bed and release very easily at the end. The bed adds a nice subtle texture that hides lines. Whatever the coating is (they don't say it's PEI, so I'm guessing it's something else), it's been great and durable, so far after 100+ hours of printing, no changes or signs of wear. I've been cleaning with Isopropyl alcohol between prints. Jury is out for me on flexibles. I understand PEI beds can hold too well. I have a spool of TPU, but it's expensive and I've not needed anything printed with flexibles recently. If I learn anything interesting, I'll update the review.
Recommended Products