Your cart is empty.
Your cart is empty.Product Description
BTT PI Packing Listing
1x BTT PI
1x Heatsink
1x SPI Cable
1x WiFi Antenna
1x BTT Duck
- Features:
- 1. 4 x USB 2.0 Ports;
- 2. Audio: 3.5mm Jack;
- 3. ADXL345 Port;
- 4. Onboard IR Receiver;
BIGTREETECH Pi 64-bit 1GB DDR3L Single Board
For CoreXY, VzBot , i3 3D Printers to Run Klipper Firmware.
1. CPU: ALLWINNER H616, Quad-core Cortex-A53 @1.5GHz;
2. GPU: Mali G31 MP2, Support OpenGL3.2;
3. Fast Ethernet: 100Mbps WiFi: 2.4G/802.11b/g/n;
4. Display: HDMI2.0A Port, 4K Supported, SPI Port;
5. Onboard connecting port for USB To CAN Module;
6. Input Voltage of Power IN Terminal: DC 12V-24V;
7. Type-C Input Voltage: DC 5V±5%/2A;
8. GPIO: Standard 40-pin GPIO Header;
9. Output Voltage: 3.3V±2%/100mA;
Same size as the Raspberry-Pi
BIGTREETECH Pi control board has the same size and mounting hole as Raspberry-Pi, making it a seamless fit for your existing projects.
Two Power Supply Methods
BTT Pi supports USB-C 5V power supply and DC12-24V from a 3D printer, making it easy and efficient to power up the board without any extra adapters or power sources.
Two Network Connection Methods
BTT Pi onboard RJ45 port and Built-in 2.4G WiFi module, supports a 10oMbps wired network. Users can connect the included wiFi antenna to get a stronger and more stable WiFi signal.
Multiple Display Options
BIGTREETECH Pi supports 4K UHD HDMl displays at 60fps and low-power OLED/TFT screens via SPI. Like HDMI5/7, TFT35 SPI Klipper screen.
Reserved USB To CAN bus Interface
Insert the CAN Adapter module enable BTT Pi to communicate with CAN bus protocol devices. Note: CAN Adapter module sold separately.
Reserved ADXL345 Interface
Hook up an ADXL345 accelerometer to the dedicated port to use the Klipper input shaper calibration tool.
Customer
Reviewed in the United States on January 7, 2025
The Pi v1.2 is like an affordable Raspberry Pi tailor made for 3d printing. I'm running 4 with Octoprint and they work perfectly.
AlishaMay
Reviewed in the United States on January 7, 2025
I ordered one of these a couple days ago- showed up- missing parts as well as the manual/welcome card that they are supposed to come with- most importantly it was missing the red power connector for the 5v Input. Literally THE way to power and program these before installing them. So I returned it and requested a replacement. That one shows up the same- but this time with a filthy duck in there (I mean FILTHY, covered in black stuff) and it is ALSO missing the key component (red 5v power jumper bridge cap) . All the pictures show it on sellers pictures. Customer pictures show it, online shows it- and a gaggle of people on the BTT forum confirmed that it is supposed to come with one as its KEY to even getting it running- leading me to believe these items were returned and sent out again- further I confirmed that this item doesn't work, no connection no nothing. I Swapped over micro sd and did a whole reinstallation on a Pi and another device with no issue just to sanity check and this BTT PI v1.2 is dead. I see the other reviews saying the same thing multiple times- I'm going to say they were correct and buying this item is a silicone lottery- new working item? Or just slap a stamp on the return bin and send em out again- maybe theyll work the 2nd go around. Suspect These items are being shipping and returned in a circle. They couldn't even bother making sure all the hardware was in the package before sending it out!? 2x in a row. Bonus For the Amazon format-Value for money- poor. It has cost me days of machines down now instead of just going with a Pi, memory capacity Is pointless I guess now- the extra functionality of added ports drew me in as its a great idea! Unfortunately I was able to utilize only 0 out of them. 2x in a row. And I didn't hear a noise from it. It was dead silent.
Gr8tful4Vine
Reviewed in the United States on July 30, 2024
I purchased this to run Octoprint for my SV06. Follow the instructions on GitHub and it works like a charm with an SV06. This was my first foray into Linux, but was very easy with BigTreeTech's installation instructions. They only issue I had was finding the correct port for running a camera, but once I googled how to find your port with terminal, all was golden. This is running with a 32GB sd card and HDMI to mini-hdmi cable plugged into my printer and is a great alternative to Raspberry PIs.I've also had no issues loading Kiauh on it in preparation for Klipper, using the Mac iOS terminal application to connect to it once you've loaded the correct Debian image per BTT instructions. The install is flawless. I'm glad I purchased!
Tom
Reviewed in the United States on July 30, 2024
I decided to build my new printer using klipper instead of marlin. Using BTT products in the past I figured I'd give this a shot over the alternative. Getting klipper setup can be a bit tricky but BTT's GitHub has all the info you need to get it set up.I've been running it for close to a month so far and it's been flawless. I've found the wifi signal to be quite weak, opting for Ethernet for daily use. You cant beat the price vs the raspberry pi equivalent. Plenty of cases available online to print for a nicer appearance than my setup. Haven't found the need to run a fan either, manages heat well.I will use these for all future klipper machines.
Anthony
Reviewed in the United States on December 26, 2024
Works as it should so far.
Charles Carey
Reviewed in the United States on December 14, 2024
I liked the dual option for power supply. Working from a 24v supply allowed me to install inside my 3d printer enclosure with no external wiring.
Richard
Reviewed in the United States on August 18, 2023
If you want a RPi for running 3D printers using Klipper, but don't want to wait for them to come back in stock, or to shell out $70-$130 USD, this is the best alternative in my opinion.With that said, you have to use BTT's OS on this, so using it for other stuff is a little limited (though still technically possible).
Jason R.
Reviewed in the United States on October 15, 2023
This came well packaged, was super easy to setup especially if you have setup one of these before with the pi4b+cb1 combo as it uses the same image. Only thing I wish is that it came with a power supply but that’s easy enough to purchase on your own. It needs a 5v 2.4a power supply at the minimum.
Recommended Products