Shopping Cart

Your cart is empty.

Your cart is empty.

AURSINC 2025 Upgraded TinySA Ultra+ ZS406 Spectrum Analyzer, 4.0 Inch 100kHz-5.4GHz HW V0.4.6 Handheld Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 900MHz MF/HF/VHF UHF Input

Free shipping on orders over $29.99

$33.99

$ 15 .99 $15.99

In Stock

1.Model:Tinysa Ultra+ Zs406


  • [UPGRADED SPECTRUM ANALYZER] AURSINC Tinysa Ultra+ ZS406 installed with NEW HW V0.4.6, with 4.0 inch 480*320 touchscreen display, 100kHz to 5.4GHz widely measure range. Built-in 32GB micro SD card, solving the on-site data storage issue, convenient for data sharing and storage. Built-in 5000mAh battery, a fully-charged battery allows for at least 3 hours of operation, without frequent recharging interruptions
  • [WIDELY FREQUENCY RANGE] The Tiny sa ULTRA+ has an ultra measuring frequency range of 100kHz to 5.4GHz, spectrum analyzer for 100kHz-900MHz and Ultra mode up to 6GHz. Switchable resolution bandpass filters from 200Hz to 850kHz, you could fast and accurate execute measurement tests. Color display showing max 450 points providing gapless covering up to the full frequency range
  • [2 IN 1 DEVICE] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 100kHZ-900MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz. Built-in calibration signal generator that is used for automatic self test and low input calibration
  • [200Hz-850kHz RBW] RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet SBB two-tone test requirements and fast scanning. The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA)
  • [EXCELLENCE PHASE NOISE] Phase noise at 30MHz of -108dB/Hz at 100kHz offset and -115dB/Hz at 1MHz offset, DANL -166dBm/Hz. In the level menu, there is the LNA, which will provide 20db of extra gain if you have very low level signal (the LNA in tinySA ULTRA is only effective below 3.5GHz) The default maximum frequency is 800mhz, so you no longer have to switch between low and high range, and can monitor the complete range in one sweep
  • [PC CONTROL] This tinysa ultra can connect to a PC via USB, Tinysa-APP directly transfers data to the computer. The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel
  • [WHAT YOU GET] 1x Tinysa ULTRA Spectrum Analyzer (built-in 5000mah rechargeable battery); 1x 32GB Micro SD card (plugged in the host); 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x stylus pen



Product Description

AURSINC 2025 Upgraded Tinysa Ultra+ ZS406 Spectrum Analyzer, 100KHz-5.4GHz HW V0.4.6 4.0 inch Handheld Frequency Analyzer

tinysa ULTRA+ ZS406 spectrum analyzer

AURSINC Tinysa ULTRA+ ZS406 produced by Hugen, installed with the hardware system V0.4.6. Tinysa ULTRA zs406 has high performance frequency from 100khz to 900MHz. In ultra mode, can reach 5.4GHz. For more information please visit below link: tinysa.org/ultra/

Spectrum Analyzer & Signal Generator in ONE, 2-in-1 Signal Generator 100kHz to 900MHz MF/HF/VHF UHF Input

TINYSA ULTRA+ ZS406

As a Spectrum Analyzer —— UlTRA Mode - Up to 5.4G; High Performation - The frequency range of 100kHz to 900MHz

It is a high-bandwidth realtime spectrum analyzer based around an SDR, used to measure and analyze the spectrum characteristics and parameters of signals

As a Signal Generator —— Sine wave output - 100kHz to 900mhz; Square wave output - 900MHz to 4.4GHz; Mixing signal output - 4.4GHz to 5.4GHz

It provides a frequency range of 100kHz to 900MHz, covering MF/HF/VHF and UHF inputs. Built-in calibration signal generator that is used for automatic self test and low inputcalibration

tinysa ultra

Easy to read, with 4'' large touchscreen display

  • Switchable resolution bandpass filters from 200Hz to 850kHz
  • Color display showing max 450 points providing gapless covering up to the full frequency range

tinysa ultra+ ZS406 spectrum analyzer

Built-in 5000mah rechargeable battery

  • Built-in 5000mah rechargeable battery, with type-C charging cable and LED charging indicator
  • Fully charged within 3 hours, work for more than 8 hours

tiny sa spectrum analyzer

Build-in SD card slot and 32GB micro SD card

  • Portable handheld frequency analyzer, convenient for data sharing and storage
  • To save settings, traces and screen shots, a huge range of trace and analytic functions
tinysa ultra+ zs406

Specification Differences between TinySA ULTRA and Tinysa ULTRA+ ZS406

tinysa ultra+ zs406 spectrum analyzer
tinysa ultra+ zs406

Who is this for?

  • HAM radio enthusiasts
  • Radio techs
  • Avionics techs
What can you do with Tinysa Ultra+ zs406?

For RF work and various tests in radio;

For remote satellite monitoring;

Scan vhf uhf bands for signals;

Checking harmonics of transmitters;

Building an electronics lab or ham shack (armature radio)

What You Get

1x Tinysa ULTRA+ zs406 Spectrum Analyzer

1x 32GB MicroSD card(plugged in the host)

2x 30cm ALSR100 SMA cables

1 x USB Type-C data cable

1x SMA-SMA barrel connector

1x TLanyard and touch plectrum

1x Antenna with SMA connector

1x stylus pen

Customer Reviews
4.5 out of 5 stars 382
4.7 out of 5 stars 132
4.7 out of 5 stars 132
4.7 out of 5 stars 132
4.8 out of 5 stars 4
5.0 out of 5 stars 3
Touchscreem 2.8 inch 4 inch 4 inch 4 inch No No
Frequency Range 100kHz-960MHz 100kHz-5.4GHz 100kHz-5.4GHz 100kHz-7.3GHz 10M‑6GHz 100k-10GHz
Battery 500mah 5000mah 5000mah 5000mah No No

CJ
Reviewed in the United States on January 20, 2025
The TinySA Ultra+ represents a significant upgrade from its predecessors, offering impressive functionality in a portable package. The 4-inch display provides excellent visibility of spectral data, with responsive touch controls and intuitive menu navigation. The frequency range from 100kHz to 5.4GHz covers most common applications, making it versatile for RF development and troubleshooting.The integrated signal generator function up to 900MHz is a valuable addition, effectively making this a 2-in-1 tool that reduces the need for separate test equipment. The hardware version 0.4.6 brings welcome stability improvements, though occasional software updates are still recommended for optimal performance. The included 32GB card provides ample storage for captures and sweeps.Performance-wise, the sensitivity and dynamic range are surprisingly good for the price point. The noise floor is manageable, and the frequency accuracy is reliable enough for most hobbyist and professional applications. The battery life is decent, lasting several hours of continuous use, though it's worth noting that intensive scanning can drain it faster.One minor consideration is the learning curve - while the interface is well-designed, newcomers to RF analysis should expect some time to become proficient. The documentation could be more comprehensive, but the active user community helps fill any knowledge gaps. For anyone working with RF systems, amateur radio, or wireless development, this analyzer offers exceptional value, providing professional-grade features in an accessible, portable format.​​​​​​​​​​​​​​​​
JDW
Reviewed in the United States on January 17, 2025
Very intuitive in use! Using it in the ham radio bands. Screen is pretty easy to see. You do need to use the stylus that comes with it.
G. Brewer
Reviewed in the United States on August 26, 2024
Truly an amazing device for the size and price. Even though I worked many years in electronic testing, I am at the bottom of the learning curve but proceeding due to the great text and videos available. I believe that this SA will handle most of the functions of a large Spectrum Analyzer.
TFCL
Reviewed in the United States on December 13, 2024
Does what a highend spectrum analyzer does in the palm of your hand for pennies!
Zorn
Reviewed in the United States on November 26, 2024
Using this TinySA Ultra spectrum analyzer to detect walkie talkie frequencies. I'm in situations where there's a lot of traffic in the 150 MHz and 440 MHz bands and need to find a frequency that won't interfere with local signals. After an initial test, the TinySA Ultra worked exactly as the videos online showed. The guitar pick to navigate the menus works great. I was able to begin detecting within minutes and able to track peaks quickly. I love how portable the spectrum analyzer is and it's fast! It scans the frequencies almost instantaneously for a narrow frequency range. I'm also astounded at all the different features I haven't even tried yet - headphone jack, signal generator... so much more to try! So glad I went with the real deal (look out for imitations). Can't wait to connect to a laptop and keep tweaking it to meet my needs for RF analysis!
Terry Biberdorf
Reviewed in the United States on October 13, 2024
Given the price, it works great
Les M.
Reviewed in the United States on April 26, 2024
I enjoy the big screen and ease of use. If you're already familiar with the NanoVNA then you'll likely find it easy to navigate this analyzer. Still getting used to all that it can do, but the one thing I quickly noticed, it does take a fair amount of time to scan frequencies looking for harmonics. I'll do an update once I get more time under my belt with this.
Careful Customer
Reviewed in the United States on September 6, 2023
Excellent price for high-quality highly capable device. Other reviewer‘s cover all of the pros, and only slight complaint I have is the 10db 25 W attenuator was not labeled. Would also be nice if calibration connectors were included. After conversion of Chinese characters and much research, I believe I found the specs for this device. See attached photos.Photos show product as received. While the box it arrived in provides good cushioning, I’ve switched to a pelican case for added travel and moisture protection, see photos. Because the device does not come with calibration connectors, I’ve also added a calibration kit and other adapters to make life easier to use it and to protect the SMA connectors on the device. After careful examination with a magnifying glass the 6db attenuator label can be seen.Although the price has increased $50 since July it is still an excellent product and a bargain.