Your cart is empty.
Your cart is empty. Specifications:
Product Name: AlTiN Coated End Mill Bit
Material: HRC55 Carbide with AlTiN Coated
Flute: 4 Flute End Mill Bit
Cutting Diameter: 5/64"(2mm) ,1/8"(3mm),5/32"(4mm),3/16"(5mm),15/64"(6mm),5/16" (8mm),3/8"(10mm),15/32"(12mm)(Optional) ;
Operation Warm Tips：
1) A high-precision, balanced and stable tool holder must be used;
2) The shorter the length of the milling cutter protruding from the chuck, the better. When the milling cutter protrudes longer, please reduce the rotation speed, feed rate or cutting amount;
3) If abnormal vibration or noise occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves;
4) When the milling cutter is processing steel, the cold cutting method is recommended to use spray or air jet, and it is recommended to use non-water-soluble cutting fluid for processing stainless steel, titanium alloy or heat-resistant alloy;
Jonas Göransson
Reviewed in Sweden on February 21, 2025
Surpricingly good quality.Milled deep cuts with it, and it eat steel fast with good finish.
Paolo Vittorio Minotti
Reviewed in Italy on February 20, 2025
Ottimo prodotto di alta qualità
Elvis the frog
Reviewed in Germany on January 25, 2025
Schloss defekt. Mit diesem Fräser ist der Zylinder im Null Komma nix aufgebohrt.
Customer
Reviewed in the United States on July 4, 2024
It is advertised as a 3/8" end mill, however it is a 10mm. As long as you dont require it to be the exact diameter its a decent mill.
Customer
Reviewed in the United States on February 15, 2024
Using this to under cut titanium bolsters on the tactical knives I make. So far it’s holding up well.
Customer
Reviewed in the United States on December 14, 2024
I like it
Canard noir
Reviewed in France on December 14, 2024
Jusque-là, j’en ai pris le plusieurs dimensions, et je n’ai eu aucun souci, le coupant n’a pas bougé, aucune ébréchure en contrôle au microscope, sur de l’acier mi-dur, un youtubeur connu dans le domaine a testé également et contrôlé au microscope,jusque-là nos échanges n’ont pas révélé de problèmes particuliers sur ces fraises de bonne qualité. comme avec toute fraise dans l’acier , il faut utiliser un bon lubrifiant pour les apprécier convenablement, pour ma part du DL Cool 9000 à 8%.
xxx
Reviewed in the United States on November 19, 2024
End mill cuts well. Needed this size for a specific job.
8675
Reviewed in Belgium on January 30, 2024
Ik ben helemaal content met die frezen, heb die voor aluminium bewerking gekocht, en het is mij gelukt...Goede kwaliteit frezen...👍
Nathan conquy
Reviewed in the United States on January 13, 2024
I've been making a brand new lathe saddle on my milling machine (because the one that came with my lathe had too much play in it and was machined wrong). On A36 steel, I was able to take .015-.030 thousands (.381-.762 microns) off per pass! Though I was using cutting oils with it, there is no sign of wear on the endmills at all! When using it on brass I was able to take .250 thousands (6.35 mm) per pass and it cut like a hot knife through butter! I am VERY happy with this purchase and WILL DEFINITELY purchase more through this vendor!
skelly
Reviewed in the United States on August 30, 2023
exactly what I wanted
CPU Dr Don
Reviewed in the United States on March 27, 2023
nicely made bit. looks and feels high quality. cuts great!
MIKE
Reviewed in the United States on November 5, 2022
The media could not be loaded.
Recommended Products
