Your cart is empty.
Your cart is empty. NOTICE!
Not for Air 2 !!!
Keep restarting or won't charge? Please lock the battery screw tightly!!!! Remember this, this is not a big problem, if you miss this screw, we can transfer 1 from motherboard.
When opening the pad, do not damage the lcd, the touch glass and the cable inside, a very important step.
Support iPad Model List:
for Air 1: A1474 A1475 A1476
iPad 5th Gen: A1822 A1823
iPad 6th Gen: A1893 A1954
iPad 7th Gen: A2197 A2198 A2200
iPad 8th Gen: A2270 A2428 A2429 A2430
Packing List
-1 Battery for iPad Air 1/iPad 5/iPad 6/iPad 7/iPad 8
-1 Pentalobe Screwdriver
-1 Philips Size Screwdriver
-4 Triangle Opening Tool
-1 Pry Opening Spudger
-1 Suction Cup
-1 Set of Adhesive
-1 Spudger
-1 Metal Spatula/Scraper
-1 Tweezer
-Kindly Note:
After the battery installed inside Pad,we suggest you full charge 100% and use the power to about 2% 3 times, then the battery will became more excellent.
If your Air Touch Screen Glass Digitizer is broken, you can replace them at the same time. ^ v ^
Q: Pad can't start?
A: If the LCD is not broken, check the battery screw, must lock this tightly, if missing this screw,trasnfer 1 from motherboard. then charge battery 20mins
Q: The Pad can be power on, but no charging?
A: check the battery screw, must lock this tightly, if missing this screw,trasnfer 1 from motherboard.
GoodFixer Customer Service Guarantee:
24-Hour Reply
365 DAYS Warranty
Joey L
Reviewed in the United States on February 16, 2025
I think the product works well and after a few cycles it appears to have very good capacity. It will power the first gen ipad air with 70% brightness and medium volume for 12 hours continuously.I believe defects in manufacturing happen regularly and how I rate a product depends on how the company responds and how the corrected product works.The first battery I received had a defect. The contact electrode area was bent. I contacted them directly as their paperwork requests. They state they will respond by 14 hours, which I thought was a typo for 24 hours.But sure enough they responded by 11 hours and sent me a replacement. They promised within 5 days and it came in 2 days. Overall the process caused a bit of a delay but this was not an issue for me.So,, a good product and good service.
lynnmarie.d82
Reviewed in the United States on December 16, 2024
Purchase this to replace the battery in my daughter’s iPad wasn’t even in for a week and it still is not working. She’s having to have a cord connected to her iPad just to be able to use it because the battery is junk.
jon chase
Reviewed in the United States on July 25, 2023
The media could not be loaded.
Mari Fran
Reviewed in the United States on March 13, 2023
This is a good product and it comes with everything you need to install a new battery. However- it does not come with instructions!!! Nor does it recommend a particular YouTube video to follow. So you are on your own. The most important thing they don’t tell you is that you will need a heat gun, high heat hair dryer, or a special heating pad to loosen the adhesive on the glass cover to remove it so you can then remove the touchscreen to get to the battery. You need to use the heat again to loosen the battery to remove it. None of the three videos I was following gave me enough specifics on how to seat the new battery. I did not reassemble it but at that point realized that I needed help. Luckily I have an honest and reasonable tech place nearby that confirmed my suspicions about the battery not being seated correctly. They also needed to replace the touchscreen. I don’t know if that was on me or not but that was an extra $130 plus the cost of the battery. Full transparency, I’m a 66 year old grandmother who likes to geek out occasionally on tech stuff but I also recognize when I’m in over my head. The tech guys did complement me on not breaking the glass cover because that usually happens when you try to remove it. I bought a heat gun for this project but truth be told I’ve wanted one for some other projects. This was a great excuse for that purchase! You need to heat the edges for at least a full two minutes before even trying to pry the glass off. I do recommend this battery. It comes with a tool set that you will need. Just find a video that has you removing the least amount of things from the casing and tells you how to properly seat the battery prior to reassembly. Overall I’m pleased with the route I went. It cost me around what I’d pay for a similar refurbished IPad and I’m really only using it for my young grandsons to play learning games on it.
Tony C
Reviewed in the United States on October 4, 2023
Picked up 3 of these because as soon as I fixed my kids ipad EVERYONE in the office magically had a broken one too and I figured might as well swap batteries.Very long lasting battery. My old one would die constantly. It would say 100% then 80% then turn off. Then u plugged it in and it said 80% again. All in the span of 2 minutes so I knew I needed a new one.Installed in about a hour using a thermal heat to take the ipad apart and had decent charge on it.Make sure to fully charge before first use and do not let it drop to 0 for the first few times so the battery can calibrate correctly or else you might get stuck in a boot loop like I did where the tablet keeps restarting non stop.If this happens, put the device in recovery mode (look up for your particular model) and leave it charging for 30-45 mins then restart and you should be ok. It won't charge on boot loop but will in recovery.The added tools were a great bonus and the extra glue is even better since I had to open the tablet back up because the home button broke off the replacement screen and I had to glue it on with B7000
Recommended Products
