Your cart is empty.
Your cart is empty.Product Description
Vibrating motors from the factory
- Only direct from the factory can such cost-effective products be available
Silent Power: A Revolutionary Advancement in Silent Motors
- The hollow cup structure combined with the silent design provides users with a quieter and more efficient experience; compared to traditional motors, silent hollow cup motors not only make less noise, but also provide more stable and long-lasting performance
Widely used vibration motors
- Vibration motors are widely used in a variety of electronic vibration devices, such as smart door locks, electric toothbrushes, beauty instruments, massage instruments, intelligent toys, as well as a variety of DIY handmade toys and product design accessories
Product parameters and precautions
- To handle and hold the vibration motor case softly
- Do not bring magnetized object near or contact with the surface of motor to avoid of performance being deteriorated
- Please do not operate or store the motor near magnet or magnetic devices
- The motor is best used within 6 months
- The device has small accessories to prevent accidental ingestion by young children
Brian K
Reviewed in the United States on February 1, 2025
I haven't Had these for more than a day, so I cant say how long they last. I plan to use these in small stuffed toy mouses for cats that will vibrate when the cat plays with them . Im unsure about some of the other reviewers that claim only a few worked. Thats why the first thing I did was test them all and they all worked great from 1 volt to 9 volts as they are designed to work at 3 but are given rating 1 volt to 6 volts but at 9 volts the one I placed aside for testing at 9 volts continuously worked for the 30 seconds until I turned off current and it was the fastest vibrating motor I've owned and the decibels didn't change, just the tone changing from low hum to a low high pitch sound if they burn out quickly at the 3 volt recommended by manufacturer that I will be using these at, I will Update this review.
MILK.
Reviewed in Canada on September 30, 2024
My title seems negative but it is merely me stating that I lack the creative prowess to find a decent purpose for these. However, the motors work perfectly fine and are variable in power. Its speed adjusts depending on how much voltage runs through these motors. From the postings, the most realistic use case I have for these would be the bristle toothbrush or vibration motor robot.
Rabbit
Reviewed in Canada on August 9, 2024
These motors are very well built and impressively strong for their size. While they were a bit too powerful for my specific project, which involves a model turret, they performed excellently when tested with a variable controller at different voltages. The responsiveness of the motors was quite impressive.One standout feature is the sealing quality. For fun, I dunked one underwater, and it worked just fine. I even bent and moved the wires at the base to check for any gaps where water might enter, and there were none. This level of durability is a bit more than I need for my project, but it's reassuring to know how robust these motors are.Pros:- Strong performance and responsiveness- Well-built and durable- Excellent sealing, even underwaterCons:- None identifiedIn summary, these motors are a fantastic choice for anyone needing reliable and robust options, especially in environments where durability is key.
NorOnt Off Grid
Reviewed in Canada on July 7, 2024
These little motors do vibrate pretty good, you can control the levels of vibration by controlling the voltage with a voltage regulator or similar product. I find that once the voltage gets above 6 the motors start to heat up, and at 8 to 10 they heat up really fast and very hot... don't go that high... I didn't test higher because I knew they'd burn out.They react kinda different at low vs high volts. They bounce around at some voltages but stay static and just vibrate at other voltages. So you can really modify and tweak what results you're going to get depending on what your plans are. The wires are VERY fine, so be careful with them.So if you're building your own wearable massager these should work great for you. Just have to get the right voltage control and secure the motors to ensure that's no stress on the wires.. I could see a lot of other uses too, like keeping powders flowing in a dispenser. Arts and crafts could use them to make things move...Anyways, they work well, and at lower voltages I think they'll have a really good life span.
RONGL
Reviewed in the United States on June 12, 2024
The wires are very lite gauge, rip right out of the unit or break stripping them. And I know a thing or two about strippin'. It is amazing how well they worked before they kibbied, (died) . I just wish they had a better way to hold in the wired. I ended taking off the plastic safety 'blob' that was holding the wire in place, did no good. There were 6 in the package every one of them wore out before I had a chance to work with a finished product. Seems silly to send them back, in the trash they went. I kept this one for display purposes. :)
Ken J.
Reviewed in the United States on March 28, 2024
Nearly silent to 3v, with very little current draw and excellent vibration.Highly satisfied overall, will update with any interesting results found in further testing.
foil hat and all that
Reviewed in the United States on December 14, 2024
bought for small projects. two of these were DOA. The rest worked great.
John Glaser
Reviewed in the United States on November 27, 2024
I bought these for replacements for a massager and they perform great. Top of the line product at a decent price!
RG
Reviewed in the United States on November 15, 2024
Strong for its size.
Straight Shooter
Reviewed in Canada on October 7, 2024
I'm impressed with their performance. They are surprisingly powerful for their small size, generating strong vibrations that can be easily adjusted by varying the voltage. I found they started operating at very low voltages, which is a definite plus for my projects. The waterproof feature is also a standout; I tested one underwater, and it held up perfectly without any signs of water ingress. However, like another reviewer, I did notice that they heat up quickly when pushed beyond the 6V mark, so I’d recommend sticking to lower voltages to prevent any damage. The fine wires can be a bit delicate, so care is needed during installation. They can vibrate quite a bit, and the responsiveness varies with voltage, which is something to keep in mind depending on your application. Overall, these motors are a fantastic choice for hobby projects like VR feedback, model robotics, or even simple wearable devices. They’re compact, reliable, and offer great value for the price, making them a solid addition to my toolkit for future projects.
Diana
Reviewed in Canada on October 15, 2024
I work a lot with molds. I use resin and plasters which need to be shaken down to get the bubbles out. I have tried all kinds of vibrators attached to the leveling tables I use, but each had their own issues, mostly the noise. I thought maybe these six mini vibrators might be enough to get things going, but I was wrong. All I needed to use was two of them.These little gems are a lot more powerful when it comes to vibration than they look. So don’t let the size fool you when you first see them. The construction is quality and yes they are very waterproof should you need to use them under water. With a variable power source you can easily adjust the amount of vibration you get with these. I find the best is around 4 volts. I use a very micro thin piece of silicone that is 2ml thick that I made to fit the vibrator to silence any noise as it hits the metal 2 foot square table I am using.Finally, with just two of these little guys I am getting perfect product from the molds. The frequency of the vibrations is very fast which won’t give a thumping sensation. The wiring coming out of it is very delicate so you need to be careful as you could snap them. I work with a lot of 22 gauge wire so I know they are delicate. But the way it is connected makes sure it won’t come off the connection to the motor.I would definitely recommend these vibrators mostly because they can be useful for so many things. I know these are going to last a long time and I don’t think I will need more. However, if I need a different type of larger one, etc., I am definitely going to be going to this company for them as this is pure quality.
corebyte
Reviewed in the United States on April 4, 2024
The media could not be loaded.
Recommended Products