Your cart is empty.
Your cart is empty.Product Description
FEATURES
- The filter is made of aviation grade aluminum alloy shell, resistance to high pressure. It works by the physical principles of gas reflux, Variable diameter cooling, vapor condensation.
- About 90% of oil and water is separated, and with no consumables, It can be used over and over again, compatible with many kinds of air compressors. filter oil and water, dry and purify air.
WORKING PRINCIPLE
- Besides on Physical principle, variable diameter cooling, steam condensation, and gas reflux.
- When compressed air enters the oil-water filter, the flow direction and velocity change sharply, and the air flow is first pushed back down by the barrier of the filter, then up, and then up, producing a circular rotation. In this way, water and oil steam are separated from the air under centrifugal and inertial forces and drop op the bottom of the filter.
- Open the bottom pressure relief after each work to drain the oil and water liquid.
- The filtrate container is seamlessly constructed from aviation-grade alloy aluminum, forming a sturdy one-piece structure with a remarkable thickness of 9.68mm.
- This ensures exceptional material strength and fatigue resistance, providing you with a safe and stable filtration experience even under high-pressure conditions.
- The oil-water separator's advanced 3-stage composite filter element effectively captures and filters harmful gases, ensuring a more thorough filtration process.
- The oil-water separator achieves remarkable improvements in filtration effectiveness compared to traditional double-layer filtration methods.
- For enhanced safety, the equipment is equipped with a 30MPa safety valve, providing reliable protection.
- It is built to withstand a normal pressure of 30MPa and a maximum pressure of 45MPa, ensuring peace of mind during operation.
- Designed for scuba diving enthusiasts, it is perfect for filling scuba cylinders with high-quality diving air, enhancing your diving experience with unparalleled comfort.
- Experience the next level of filtration with our 4-stage advanced water purification system that boasts a 99.9% removal rate of impurities, oils, and odors.
- Simplify your setup with our upgraded filter that effortlessly connects to PCP air pumps, hand pumps, high-pressure air compressors, and various other devices, ensuring maximum versatility.
Dickie Greenleaf
Reviewed in the United States on September 24, 2024
The media could not be loaded.
clayski
Reviewed in the United States on September 13, 2024
This filter works as described. Good value considering the price. The supplied mount was not very robust for such a large tube, so I stabilized it at the top with a hose clamp.
Bob
Reviewed in Australia on October 23, 2024
Good product works great for pcp
Paul
Reviewed in the United Kingdom on August 25, 2023
What a great bit of kit .Works over & over with out having to change filtres .Built of tuff stuff.A must have if topping up Air tanks or PCP Guns .Worth paying the extra postage took 4 days to get to mefrom Salt lake USA to UK.Very Happy .Thanks!!!!
julie clarkson
Reviewed in the United Kingdom on November 5, 2023
If your in the market for a filter then get this one 100%.
Edmund Kellogg Clark
Reviewed in the United States on April 2, 2023
I live in the extremely humid tropics (climatological classification). I filled an AL80 scuba tank through this "separator" and only two teaspoons of condensate came out the drain valve, upon completion. At 80% humidity and 80 degrees, there are 3.12 tablespoons of water in that volume of air. That means this device removed ~ 21% of the moisture. Before returning the device, I was determined to find out if it was more than an empty can. I used the best possible tools to attempt to open it. They must have epoxied the threads because it would not budge. None of the other filter/separator devices I have used were thus sealed. The only plausible explanation is that it is nothing but an aluminum can dressed up in BS. I got so busy trying to open it that I missed the return deadline. It is becoming apparent that the Chinese manufacturers who use this platform see Americans as bent over with cheeks spread. So long as we keep buying their garbage and lies, they must be right.
69CamaroSS
Reviewed in the United States on November 13, 2021
This is a quality unit. I'm very happy with it's performance in reducing the initial water vapor content coming out of my HPA compressor. This unit is a must. And imo, should be paired (and placed ahead of), a high quality, HPA "molecular sieve" element filter. This filter simply uses gravity to catch the initial heavy oil, and water leaving the compressor upon initial start up. After starting the compressor, it quickly begins to build pressure. I wait no more than about 8 to 10 seconds, then briefly unscrew the "blow off" valve, at the bottom of the unit. I have the valve routed into a home made "catch canister" filled with cotton balls, via a short section of vacuum hose. A vent at the top of that canister blows mostly air out at a fairly high rate. Sometimes there is oily water in that. Bottom line, this thing WORKS. And it works well. If it weren't in place, all of that initial water/oil vapor would be sent right into the molecular sieve element filter. Greatly reducing the effectiveness, and longevity of that filter. And those filter element inserts aren't cheap, if you have to replace them prematurely in order to maintain totally dry air. Because this unit is purely a mechanical device, it will definitely save you $ in the long run. It pretty much pays for itself, over time. One thing to note here, about this company. The unit I received was definitely brand new, and had no signs of being a return, that I could surmise. However, the hardware contents that came with the filter was missing the blow off valve screw. Being a very specialized screw, specifically designed for this unit to be able to seal that port at very high pressures, it was not something I could easily supplant with just any ol screw, as a replacement. I contacted the company, and they responded immediately. They sent me the screw pack, which arrived in the mail very quickly. Brand new in the package. The customer service can't be beat. Was I bummed initially? Of course. But sh*t happens. It's how they dealt with it, that really impressed me. FYI...I paid for this unit. It was not "sent for review", by my request, or theirs. They've never asked me to write a positive review, or offered me anything in exchanged for doing so. I've been using it for over a year, now. And based on it's continued reliability, their outstanding service, and the fact that they rectified a factory error, with zero run around, I decided to write this after coming across it in my order history. Buy it.
Ed
Reviewed in the United States on June 7, 2018
So bought this device for my Yong Heng compressor to filter out the water.....came packaged staright from China with all Chinese writing and labeling....no big deal it's dummy proof to figure out.I tested the system on a 87% humidity day compressing 4500psi into a 68ci tank in continuous go.....leaked like crazy from the fitting, YOU MUST USE TEFLON TAPE ON THEM, filled tank with out any issues after that, and drain valves works perfectly but air exits violently so be careful...HOWEVER....my first test run I drained the air extremely slowly to not let the water get expelled. When doing so I cracked open the system, and to my surprise there was a TON of water in the catch and verfied it works extremely well.Pro:Very sturdy built.Works amazing wellSimple design when you pop it openExtra orings and mounting bolts.Again works VERY VERY GOOD.Cons.Deff not worth $160 when you open it up, it's so basic it more of a $50-$75 system but if you want something that truelly works well don't up the cash because whoa it works amazingly.Mounting bracket limits ways to mount the system but that's not to big of a deal.Release valve uses a Derlin seal and once that seal wears out(would take a while but still), your stuck finding a way to use a oring to seal the valve because let's face it it's from China good luck getting parts.So long story short, it's not technically worth $160 but it works and works very well, so if you not hurting in money or want something that doesn't require desiccant beads then this is the ticket for you.Yes I would buy again with out any second thought
Recommended Products
$49.99
$ 26 .99 $26.99