Shopping Cart

Your cart is empty.

Your cart is empty.

12 Volt Power Adapter fit for 2018-2020 2021 2022 2023 2024 Jeep Wrangler JL JLU Unlimited & Gladiator JT & for 1999-2018 Jeep Wrangler JK JKU TJ Unlimited Both Two and Four Door Models

Free shipping on orders over $29.99

$17.99

$ 8 .99 $8.99

In Stock

About this item

  • Vehicle Specific Design ->> Unlike one size fits all wiring harnesses, this 12 Volt Power Adapter was engineered for use with JL Wranglers. Compatible with 2018 2019 2020 Jeep Wrangler JL & Gladiator JT. It is compatible with both two and four door models, regardless of trim level.
  • Versatile Application->> This wiring harness adds an inline fuse and connection point to your factory 12-volt power outlet. You can conveniently connect a CB radio, auxiliary lighting, radar detector, portable GPS or other accessory to this Quadratec 12 Volt Power Adapter.
  • No Splicing Required->> Our Opall 12 Volt Power Adapter is a direct plug-n-play solution that requires no additional modification. This user-friendly design allows you to easily power the accessories in your Jeep.
  • Package Included->> 1X 12 Volt Power Adapter
  • Reliable Customer Support - We are confident in the quality of our products and offer a 30-day money-back guarantee. If you are not 100% satisfied with our products, simply return it for a full-refund. Additionally, we offer premium support and a 1-year warranty for your peace of mind



Product Description

11111
222

Vehicle Specific Design

  • Unlike one size fits all wiring harnesses, our Opall12 Volt Power Adapter was engineered for use with JL Wranglers. Compatible with 2018 2019 2020 Jeep Wrangler JL & Gladiator JT. It is compatible with both two and four door models, regardless of trim level.
  • This wiring harness adds an inline fuse and connection point to your factory 12-volt power outlet. You can conveniently connect a CB radio, auxiliary lighting, radar detector, portable GPS or other accessory to this Quadratec 12 Volt Power Adapter.
6

NO SPLICING REQUIRED

It's a direct plug-n-play solution that requires no additional modification. This user-friendly design allows you to easily power the accessories in your Jeep.

INSTALLATION INSTRUCTION

1.Using a Trim stick or flat edge screw driver, remove the dash panel below the steering column.

2.Unsnap the upper heater control panel and unplug the wiring.Remove the panel.

3. Using a phillips screw driver, remove the screw holiding the window control panel.

4. Fold the panel forward.Unplug the gray connnector on the power port located on the drivers side of the window control panel.

5.Take the gray connnector and plug it into the large white connector of the power tap.

6.Plug the small gray connector on the accessory power tap back into the power port on the window control panel.

7. Pull back the carpet on the passenger side of the console.Remove the plastic cap covering the console bolt and remove the bole. This will allow access for the terminal block to the fed through.

8.Route the white termial block and fuse holder on the power tap down through the small hole in the lower center section of the dash toward the passenger side coner of the dash as highlighted.(Take your time and have patience, it is a tight fit)

9.The white terminal block will end up under the carpet at the bottom of the console.This will be an easily accessible location for any future connnections you need to make.

10.Reassemble the dash.

Customer Reviews
4.1 out of 5 stars 45
3.1 out of 5 stars 4
3.9 out of 5 stars 10
4.0 out of 5 stars 144
Item Name Roll Bar Storage Bag Cage with Multi-Pockets Car Cover Cab Cover fits for Jeep Wrangelr JL JLU Universal Front Seat Cover Universal Front Seat Cover
Fitment Fits for Jeep Wrangler 1997~2018 Jeep Wrangler JK TJ LJ & Unlimited Rubicon 4 Doors Fits for Jeep Wrangelr JK JKU JL JLU GIadiator 2007-2020 4-Door Fits for Jeep Wrangler JK JL Ford Jeep Cherokee Fits for Jeep Wrangler JK JL Ford Jeep Cherokee
Material 1000D Cordura 330D Oxford 600 denier polyester 600 denier polyester
Color Black Black Yellow Black

Jay
Reviewed in the United States on January 1, 2025
Used this to hardwire my dashcam in my 2022 Model Y. It took some effort to remove the center console area to get access to the harness but once I did, this worked great for tapping into the 12V harness without cutting or splicing any factory wires.
Dave
Reviewed in the United States on July 1, 2024
Great plug and play for additional power to my GMRS without utilizing one of my AUX switch circuits. Instructions were complete and the actual electrical hookup was simple. This is a must have for anyone with a Jeep that does not wish to cut into existing wiring.
JenJen
Reviewed in the United States on February 17, 2024
This works perfect for a 2022 Ram 2500
Wats
Reviewed in the United States on May 26, 2023
I used this to power LED cup holders in my Tesla Model 3. Plugs in between the back of the .cigarette lighter style power port inside the console, and into the harness connector for that. The fused accessory connector has screw down connections for the added wires. No soldering required
Customer
Reviewed in the United States on May 11, 2023
Product arrived fast and was an easy install.
Eddie Evans
Reviewed in the United States on November 23, 2023
Very simple to use, just plug in and job done
Philip Thompson
Reviewed in the United States on October 20, 2023
It's so sad Jeep took the aux switched and unswitched power leads away. The jk really makes it hard to add circuits. This is a must have if you plan to add any extras to your Jeep. Only downside is if you pop your 12v socket fuse, you loose power to the switches of said extras. I'll have to look again and see if I can find something like this for under the hood, though would not be hard to make something.
C. Knox
Reviewed in the United States on October 19, 2020
Worked as listed. Definitely made the install easier.
Recommended Products