Shopping Cart

Your cart is empty.

Your cart is empty.

ZEITE 20V 2.0Ah Detail Sander Cordless, 13,000 OPM, 12Pcs Sanderpapers, Finger Sanding Design for Polishing of Small Details,Electic Sander for Woodworkiing, Dust Bag, Battery and Charger Included

Free shipping on orders over $29.99

$49.99

$ 25 .99 $25.99

In Stock

About this item

  • 💎SPECIAL SDS FINGER PAD DESIGN:This ZEITE detail sander has unique retractable finger pad design,which is a great help when you are dealing with confined spaces, corners, edges, small items and complicate items such as window bar, stairs and closets
  • 💎UP TO 13000 OPM MOTOR:The top speed 13000 OPM copper motor offers less heat and more power than the aluminium-coated copper motor. The vibration is low and the hands are not numb during prolonged work. This delta sander runs more stable, low-vibration and quiet
  • 💎EFFICIENT DUST COLLECTION SYSTEM: Strong suction and efficient dust absorption ensure a clean and tidy working environment. The dust removal system is efficient and stable to ensure that not too much dust appears in the machine and the machine comes to a standstill
  • 💎COMPACT & LIGHTWEIGHT: Compact design and lightweight of 2.33 Lbs makes it user friendly; soft rubber wrapped gripping handle also adds more comfort to your sanding.Also you can have wireless freedom and work stress-free outdoors
  • 💎WHAT YOU WILL GET: 1 x Zeite 148D detail sander, 1 x battery pack,1 x battery charger , 1 x dust bag,1 x finger pad,12 x sanding&finger paper (60/80/120 grit ), 1 x User Manual
  • IF YOU HAVE ANY OTHER QUESTIONS OR SUGGESTIONS,PLEASE FEEL FREE TO TELL US



Product Description

1

ZEITE 20V 2.0Ah Compact Cordless Detail Sander with Dust Collection and 12Pcs SDS Finger Sandpaper/RS125D

THCHNICAL DATA

Rated voltage 20V
No load speed 13000 RPM
Base size 5.51 x 5.51 x 3.15"
Machine weight 2.36 lbs
Charger input 120V~60Hz
Battery capacity 2.0 Ah Li-ion
2

OPERATION TIPS

  • Your sander is equipped with a teardrop base which allows you to use it on large flat surfaces, as well as difficult and confined areas.
  • The workpiece to be sanded must be securely fixed in case it moves during sanding
  • Be sure to hold the sander firmly while it is woorking and gently apply force on it. It may “kick” on first contact. Hold the sander so that it is flat on the work and move slowly, preferably with a smooth, circular motion. Regularly check the condition of the sanding paper and replace when worn for best results.
3

  • SDS FINGER PAD

The detail sander is a sanding tool with a SDS Finger pad, which is suitable for fine sanding in corners, edges, or hard-to-reach areas.

  • OPENING THE SDS FINGER PAD

Raise the lock button upwards the top of the sander. Pull the SDS finger pad out. Pull back the lock button to lock the SDS finger pad.

4

Julio Gil
Reviewed in the United States on July 30, 2024
The media could not be loaded.
S. Carter
Reviewed in the United States on July 10, 2024
Sander is easy to use once you figure out the directions for using the tip.
Zeke
Reviewed in the United States on March 23, 2024
I finally got a chance to really use this thing last night and I am very impressed. These days we tend to see the same products with slightly different colors offered by 100 different chinese companies and it's hard to know which ones are actually built well. Here are my impressions so far...Good stuff:-Power, this vibrates faster than my other plug-in palm sander which makes it sand faster as well-Dust Collection, When I started sanding the board I thought it wasn't removing anything for the first 15 seconds or so because I wasn't seeing any dust left on the wood at all. After I stopped it and saw the board was actually getting sanded I took off the little dust bag and a small pile of dust came out. Basically, this thing can suck up more dust than in produces without an external vacuum. I think this is my favorite part of it because dust is always a problem when working with wood.-Battery Life, Just to test it in a controlled environment I fully charged the battery and then placed the sander in a box and turned it on so that it could just run under its own weight... I had to shut it off myself 70 minutes later because I was done in the shop and it still hadn't quit. I realize that with the small bit of extra pressure used to really sand something the battery won't last quite that long under normal use but even if it gives me 30 straight minutes of sanding that is impressive to me.Also speaking of running for 70 minutes straight... The motor just kept going, the device didn't even feel warm when I finally turned it off so this has a 10/10 duty cycle so far.Bad Stuff:Honestly, I haven't found anything about this sander yet that I don't like. It would be nice to have a second battery to use while the other one charges but that's definitely an extra.
J. M. Chaney
Reviewed in the United States on March 19, 2024
I am really impressed with this sander. I had a DeWalt palm sander for years, but the last time I tried to use it, something had broken inside. I tried to find a rebuild kit of some kind, but no luck. So, I ordered this detail sander. When I pulled it out of the package, it felt like it was pretty good quality. The battery has a charge indicator, and it arrived with a partial charge. I plugged in the battery and switched it on. It had a completely different feeling than my old sander. It feels very powerful but has a lot less vibration. My old sander had a lot more vibration transferred to your hand. It had never bothered me, but I really like the feel of ZEITE sander. It is also quieter. Another thing to like about this new sander is the fact that it is cordless. It is so much easier to take anywhere, especially outside. I love not having to be near an outlet. The dust collector also worked well. It left virtually no dust. It also comes with an attachment to hook up to a dust collector. The Velcro pad on the bottom worked well with attaching the sandpaper. The only issue I ran into was when I tried to pull out the extension piece on the front of the sander. It has a latch to open and then you can pull the "finger" out. I couldn't get it to pull out. There is a cut out in the bottom pad of the sander where the finger is. On closer examination, it was not cut all the way through. I took a razor and cut it through, and it pulled out. It was a minor inconvenience and considering how well I like everything else about this sander, I am not going to take a star for that. This is a good finish sander with a solid, quality feel to it. I am glad I ordered it.
FLYnVFR
Reviewed in the United States on April 6, 2024
The media could not be loaded.
Recommended Products