Your cart is empty.
Your cart is empty.Product Description
Easily Manage a Variety of Filaments
This sheet is suitable for printing a variety of filaments. It is recommended to use PLA, PETG, and TPU on the PEY surface, while the PEI surface can be used with almost all filament types, including PLA, PETG, TPU, ABS, ASA, and Nylon. One YOOPAI Build Plate fulfill all your daily printing needs.
Unique Textures Make Your Creations Special
The diamond texture on the surface of PEO can be replicated on the base of your creations. The texture of each area of the PEO surface is randomly generated, meaning you get a unique model every time you print.
Make Every First Layer Perfect
The new version YOOPAI double-sided build plate uses a more advanced spraying process than the previous generation. The coating is more uniform and has stronger adsorption force. No matter which side you use, you'll get a perfect first layer.
One-step Installation without Waiting Even 1 Minute
Just attach the soft magnetic sticker to the printer's hotbed and turn the PEO or PEI side up depending on your needs, then stick it to the magnetic sticker and start printing. The whole process only takes 30 seconds to complete. Let YOOPAI build plate instantly improve your printing results.
Diego
Reviewed in Italy on February 7, 2025
Valido sostituto dell'originale.
Stuart
Reviewed in the United Kingdom on February 4, 2025
I bought this plate because my old Creality magnetic bed has seen better days. Printing on it had become a hardship and I couldn't find the same replacement matt, so I bit the bullet and went for this PEI sheet, which i am classing as an upgrade for my CR10 V2. It was a super simple install, hardest bit was removing the old magnetic base. Once removed however the new base went on like a dream and fits my bed size perfectly. Magnetic PEI sheet is very sturdy, feels like good quality and the magnetic hold is pretty powerful, no chance of any accidental movement once in place. Once I manually levelled my bed, I ran a bed level test print I like to use, and I am happy to report on my 1st attempt after install.it printed perfectly. Great adhesion to the plate itself, the pattern leaves a nice finish on the back of the print and I am also happy to report the print was super easy to remove. Very happy so far with this plate. I'll see if I can come back with an update after I have done a few proper prints on it.
Wreck-n-Crew
Reviewed in the United States on February 10, 2025
I've had this for a while now and the magnets still stick hard and snap the flex plate down tight. I've had the bed up to 110 for mini prints and no loss of magnetism.The spring beds are a little stiff So small parts in the center might need a little help depending on the filament used. ABS locks down tight and if you let it cool all the way it automatically releases on its own You don't even need to flex it. PLA a little flex and it's off so be carefull not to drop your prints.
Patrick Boehm
Reviewed in the United States on January 5, 2025
I went from a glass bed plate to this and WOW is it a good difference. I used to have to spatula my glue sticked on prints off the glass plate. Now I just lift this plate up and bend slightly and every print just satisfyingly slides right off. I should have bought this years ago!
Brent Morris
Reviewed in the United States on January 31, 2025
Worked well on my Sovol SV06. Appreciate the texture and the blank surface (no printed lines).
Daniel
Reviewed in Canada on July 30, 2024
It's wider than the neo 2 plate ( which I knew) but it works and looks good 👍🏻
B. Meyers
Reviewed in the United States on June 15, 2024
Strong magnetic hold. Easy to remove and reinstall to the magnetic pad. You may need to adjust bed temp to have items stick to the PEI plate. Note: if you ever need to remove the magnetic pad from your hotbed you will likely ruin it. I heated the bed and used a paint scraper to remove it and then stuck it to a silicone coated baking paper to store it till I could reinstall it. Needed to use Acetone to remove the residual adhesive. Hopefully you don't have to ever do this but it did illustrate how well it adhered to my build plate.
N
Reviewed in Canada on May 8, 2024
I was having problems with my glass bed being too scrubbed and having a silk like surface. I got the pei to do 300deg nylon , but since i have problem with my glass , i use it for pla too and it works super. It grabs very small doghnuts shape on the first layer without having to overheat the bed and removal is a bliss. I knew beforehand the pei only flaw can be scoured by the nozzle so make sure you never touch the bed (why would you go that close anyways without checking first) and this will be the best adhesion surface you will print on ever, its not a glass finish , a bit gritlike but considering the advantage of not having to use glue or ruining prints on the first layer is to me the the best go to bed surface. Ironically it also let you take the prints off without even lifting it off the magnet.Comes with a magnet but i just kept my original on and its as performant. Metal sheet is powerfully attracted to the magnet. No clamps paperclip or glue will ever be required with this perfect product
Edmund M
Reviewed in the United States on December 28, 2024
I dont know why I waited so long to get this PEI bex plate. It is far superior than any glass bed. No gluing or scrubbing after printing. The filament sticks first time every time and is super easy to remove after printing is complete.I can highly recommend this.
Kaleb
Reviewed in the United States on December 22, 2024
I feel stupid It was sticking just fine out of the box for like a few days with PLA then when switched over to PLA + for a part for work and it did not stick and then I found out it just sucks all together and I thought it was my bed level nope it was it not sticking
David Croix
Reviewed in Belgium on December 12, 2024
Ayant une creality Ender 3 S1 Plus, le plateau d'origine s'avère être une véritable crasse. Le PLA de creality y colle beaucoup trop fort (imprimée à 210 degrés) à tel point que même refroidi, les impressions ont beaucoup de mal à se décoller sans la spatule. Etant totalement usé, j'ai décidé de tester ce produit et je dois dire que je suis entièrement surpris ! Aucune de mes impressions ne sont décollées pendant le processing et une fois terminé, même à chaud, les pièces se retirent sans aucun problème! Ultra efficace! je recommande car il n'y a pas beaucoup de choix de plateaux en 30x30. Les encoches ne sont pas alignées avec le plateau de ma Ender mais ce n'est absolument pas bloquant
hmlessalky
Reviewed in the United States on October 3, 2024
So far has held up flawlessly, no damage no signs of wear. At this rate, the 2 plates should last me forever!Everything sticks, and releases when cooled. Some TPUs have been a little stubborn to remove, but never impossible. Haven't printed with anything too heat heavy yet, but I am not worried about anything being too problematic.The price for 2 sheets, and a magnet sheet, is tough to beat. Slides right in place on my K1 with the stock magnet, and doesn't shift or shimmy at all. And the 1st layer finish is awesome to me, might not be the best if you are trying for super smooth, but I will take a texture over layer lines anyway anyway.Highly satisfied, and a great purchase for any situation where this will fit.
Greg Munker
Reviewed in the United States on May 31, 2023
So, I recently got myself the PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for my Creality Ender 3 printer, and let me tell you, it's been a game-changer! I just can't find a single downside to this awesome sheet.First off, this PEI sheet is amazing. It's like a magic surface that helps my prints stick to the bed perfectly. No more worries about prints detaching or warping halfway through—they stick like glue! The consistency it brings to my prints is seriously impressive, and it's made a noticeable difference in the quality of my 3D prints.I also love that this sheet fits my Creality Ender 3/Ender 3 Pro like a glove. It covers the whole build plate, giving me the maximum print area possible. It fits so snugly that I don't have to stress about misalignments or the edges peeling off. It's like it was made specifically for my printer!Now, let's talk about the magnetic sticker with adhesive. It's a nifty little thing that holds the PEI sheet in place on the bed. The adhesive is strong and reliable, so I don't have to worry about the sheet moving or coming off during printing. Plus, the magnetic properties make it super easy to remove and reattach when I need to clean the bed or do any maintenance. It's hassle-free!I must mention the durability of this PEI sheet and sticker combo. I've been using it for weeks now, printing like crazy, and it's still holding up like a champ. No signs of wear or deterioration whatsoever. It's clear that this sheet is made of high-quality stuff.Maintenance is a breeze too. Cleaning the PEI sheet is as simple as wiping it with isopropyl alcohol or warm soapy water. I don't have to spend a ton of time or effort on it, which means more time for me to focus on creating awesome prints!
Recommended Products