Your cart is empty.
Your cart is empty.Product Description
42-34 Stepper Motor
42-34 Stepper Motor, lower noise, stronger torque.
Rigid Coupling
Torque transmission and alignment.
T8 Leading Screw
The guide rail precision is P3-P7. The repeated positioning accuracy reaches 0.01 mm. high loading ability and high running speed meet the high-speed running requirement.
Z-axis Stepper Motor Mount
Fix the motor on the profile and more stable operation. Light, durable and easy to assemble.
Leading Screw Bearing Holder
Leading Screw Bearing Holder.
T8 Leading Screw Bracket
Strong metal support is used to effectively improve the bearing capacity of X-axis.
Tomakze
Reviewed in the United States on February 28, 2025
This made the printer much more rigid. I could flex the x-axis around a lot before, and there's no way that was good for print quality. It's tight and precise now, and the install was kinda fun. It seems more complicated than it is.
Lane Hurraw
Reviewed in the United States on February 23, 2025
This kit is phenomenal! If you have issues, remove the top supports. The rods are not perfectly straight and when you try to anchor the top of them, rather than letting them float, it will move your print head instead.
Laura
Reviewed in the United States on February 22, 2025
This was kinda hard to set up but has amazing quality. It works well, is light, and has an great value for money.
Niklas T.
Reviewed in Germany on January 4, 2025
Macht das was es soll.
Studley Beaver
Reviewed in the United States on January 18, 2025
This is a great fit for the ender 3 and super easy to install.
Patrice F.
Reviewed in France on January 15, 2025
Conforme au descriptif
Alan Nieblas
Reviewed in Mexico on August 11, 2024
la verdad me resulto muy util por si tenian dudas es compatible con la anet et4
Bill
Reviewed in the United States on July 27, 2024
Not sure what the other reviews are complaining that parts dont line up. I installed mine and it all went together very easy and the fit was perfect. It Works great on my Ender 3. Definitely helps the Z axis tighten up on tolerances. My printer has never printed better. If you are contemplating this. Don't hesitate just buy it and install it. You wont regret it.
Lina
Reviewed in the United States on December 18, 2024
Great kit for my Ender 3 Pro 3D printer. Added better stability and prints come out better than used to be. Recommend the upgrade.
guillermo l.
Reviewed in Spain on November 21, 2024
Tengo una ENDER 3 Neo y funciona perfecto, mejoro mucho la calidad de impresión. Las imagenes de las instrucciones un poco complicadas de entender pero con un video de youtube se instalo facil.
Jeremy
Reviewed in the United States on October 25, 2024
If you have an ender3 pro and haven’t added this, do it! Much better print quality due to the dual screw. Much more accurate and stable. Easy to install and a great upgrade for the money. Fit perfect.
Leon
Reviewed in the United States on February 19, 2023
This kit works great and definitely will tighten up the z axis of your Ender 3. The installation was quite easy once I was able to figure out how it all goes together. There are however a couple things that I have seen about this kit in many You Tube videos, etc that are just dead wrong, and may cause you a lot of frustration if you follow poor advice.The main issue is that machine frames are never perfect, and it is okay- and normal for your z axis to be unlevel by a mm or two in one direction or another. When the installation is finished, Do NOT try to align the z axis to the top bar by wedging some object in there. This is terrible advice. it will create unequal stresses on the steppers and they ultimately will work itself back to balanced forces, causing poor print quality. What you actually want to do to align it is to turn both z screws in opposite directions by hand and you will feel it begin to bind as the forces become uneven. Set it in the middle of the range on both side so that the forces are balanced across both leadscrews/stepper motors. It will stay right there and not move alignment. Forcing it to a different alignment, will only cause it to miss steps at some point and fall back into balanced position during the middle of your print. Once the forces are balanced and you have run the axis up and down a few times, it will stay there. Now tram your bed to this alignment and you will not have to touch it again. I have printed at least a dozen prints since installation using this method and cr-touch bed leveling repeatedly shows .01-.03 max variance without ever adjusting the z axis.Installation Notes: The first thing you should do is remove the original leadscrew and check and adjust the eccentric nuts on both sides of the z axis. The whole axis should roll up and down with no resistance, but be snug enough to stay straight and not wobble. Put something on your printer bed to keep the nozzle from hitting the bed while you are doing this. During the installation process, be certain to loosen the two small hex bolts that hold the brass follower nut to the arm. the nut can move aa few mm in any direction and will alleviate any alignment stress on the leadscrew. Leave all the attachment screws slightly loose, and only tighten the leadscrew into the stepper coupler. Move the z axis to the top to align the stepper/leadscrew to the frame and then snug up the stepper attachments. Bring z back down and make sure it moves smoothly and then snug the brass follower nuts. The top bearings actually slide back and forth to accommodate any forward or backward tilt of the stepper, so your main concern here is right/left alignment.
martin
Reviewed in Canada on July 10, 2020
Super kit
Recommended Products