Your cart is empty.
Your cart is empty.Product Description
-
You can adjust the brightness by RF remote control or dimmer.
-
-
-
kiki
Reviewed in the United States on January 9, 2025
Great pizzazz to my kitchen. It wasn't too bad to install. The light stick pretty good. I installed it and it took about 10min. It was too long so I was able to follow directions and used a straight and it all worked out. Tape sticks great. They gave extra tapings. Remote is awesome has so many features on it that I probably won't even use...lol but I did use the bright and dimmer. Brings so much beauty to my kitchen. I also like the fact that I can leave it on dimmer over night in case I wake up for a late night snack or water. Hope they last but if not price was great.
jean-marc bissonnette
Reviewed in Canada on September 14, 2024
I purchased 2 sets 2 years ago when we redid our kitchen, the first set lasted about 18 months and then started to flash non stop so we ordered a replacement. The controller is what had failed but you can't buy separately. And recently the second one also failed also the controller. Other than that were very happy how bright it is and that you can adjust it.
Photokent
Reviewed in the United States on June 2, 2024
Update as of 6/11/24. The seller/manufacturer contacted me and gave me the link to the controller. We ordered two and they graciously refunded the money. We received the dimmer/controllers and installed. Worked perfectly. Ordered two more as backups. We appreciate very much the customer support and can heartily recommend this system with the one caveat that the controller can go dead at times.Here is the link: https://www.amazon.com/gp/product/B08L4G5RSGThis should have been a 5 star review except for one little issue. the controller.i have 3 sets of these lights installed. easy install. i could rematch to one remote, no problem. love the different levels of light love the dimming control.the only issue, and this has happened now to 2 controllers, is they have died. I bought a 4th set and the controller works for both of sets of installed lights iwhich previously stopped working. I cannot find just a replacement part for the controller T917 so now I have to purchase a whole new set to just get the controller. Maybe the manufacturer or distributor will reach out and help me with this as i would love to make this a 5 star review.
Cliente de
Reviewed in Mexico on February 12, 2024
No sirven, la luz led no se mantiene fija, tiene un parpadeo constante
Laurie
Reviewed in the United States on December 28, 2024
We've wanted under cabinet lights for a while, but we had some criteria that made it challenging to find a solution that checked all the boxes. Happy to say these lights worked for me! I'll share the products I used in case anyone is looking for something similar.My criteria:-Didn't want to drill into the cabinets-Didn't want to hard-wire, as we have an outlet in a corner that doesn't get used and the plug can be hidden easily. Not to mention, hard-wiring would be costly for how our kitchen is set up.-Wanted to be able to control remotely preferably through Apple HomeKitWhat I used:-10-Pack 3.3ft/1Meter U Shape LED Aluminum Channel System with Milky Cover, End Caps and Mounting Clips-Wire Covers for 2 Cords, 68in (4X L17in) Wire Hider on Wall Mounted, White Cord Cover Kit-2 Rolls Double Sided Tape Heavy Duty - 240" x 1.2" & 0.8" - Removable Nano Tape for Poster Carpet Picture Hanging Strip Rug Wall Outdoor-Accessories for WOBANE Cabinet Light Kit, 3 Pin Extention Connecter, FPCB Connecter-Eve Energy (Matter) - Smart Plug, App and Voice Control, 100% Privacy, Matter Over Thread, Works with Apple Home, Alexa, Google Home, SmartThingsThe channel system was for aesthetics (the reflection of the LEDs) and to protect the lights. I can easily remove the lights and replace them in the future, if needed. It comes with mounts, but I opted for heavy duty double-sided tape so I didn't have to drill into the cabinets. Time will tell how that lasts and this is personal preference. I also ran the cables down the corner of my backsplash and covered them with a wire cover, which I painted to blend in with the backsplash.I purchased the WOBANE accessory kit mainly for the extra extenders, which I needed to run under the microwave. The extenders included in the kit with the lights weren't long enough for my purpose.Finally, I bought the Eve Smart Plug, which is compatible with Apple HomeKit (as well as other smart home systems) so I can turn on the lights remotely and connect them to other scenes I use. We also attached a magnet to the remote that comes with the kit and keep it on the refrigerator just in case. In the photo, I'm using an Innr plug, which works with Philips Hue (plus Alexa, SmartThings, etc) but not HomeKit. This photo was before I swapped the plug.Installation was very easy. I used tin snips to cut the channels to fit my cabinets. It's worth mentioning that the AI summary and some reviews say you can cut the light strips, which is true, but you can't reconnect them without additional tools. So it's best to cut the strip at the end where you don't need to attach more. Overall, I'm very happy with this solution, especially for the affordable price point just over $100 at the time of writing this.
Emiliano
Reviewed in Mexico on March 21, 2023
No esperaba mucho por el precio, pero realmente me sorprendieron, el control funciona de maravilla y es muy fácil la instalación, solo queda ver su durabilidad, actualizare si es necesario
luis islas
Reviewed in Mexico on September 1, 2022
Hasta el momento todo bien, lo instale y todo funciona correctamente, veré mas adelante si continua así y haré is comentarios.
suriel
Reviewed in Mexico on June 19, 2022
Muy buen producto, sólo que los conectores son muy cortos
Gary B
Reviewed in the United States on December 18, 2020
I bought these led strips for under my cabinets. Everything working great.Here are some (important) tips on installation.(Or, as the "Franz" character from SNL would say, "hear me now, believe me later". Look it up in the urban dictionary if you don't get it)First, DO NOT STICK THESE LED STRIPS DIRECTLY ON THE UNDER-CABINET SURFACE!Why you might ask?1) You can not clean these LED strips. All electrical components are exposed. They will get dirty and it's almost impossible to clean them.2) You will likely never get them off or adjust them without wrecking them. It is very hard to lay the flexible LED strip straight and once you stick them to the underside of the cabinet adjustment is almost impossible due to the strength of the adhesive.3) These bare LED strips stuck to the underside of the cabinet just looks "cheap".So, take advantage of my early mistake and do this instead:1) Buy some aluminum channels to hold the LED's and attach the channels to the underside of the cabinet.2) Use the new-fanged 2-sided "nano-tape" to attach the aluminum channels to the underside of the cabinet.How this solves the problems:1) The channels come with a cover/light-diffuser. So, the LED strip is inside the channel which is covered and can be easily cleaned.2) Using the channel they will be dead-on straight. Using the "nano-tape" you will be able to easily adjust (and remove, if needed) the lights from under the counter. No holes to drill in your cabinet. This tape is very strong and the channels and LED strips are very light.3) Looks good.The items I used which I purchased on Amazon are:These channels to mount the led strips. These fit exactly, no cuttingStarlandled 10-Pack Aluminum Channel for LED Strip Lights Installation,Easy to Cut,Professional Look,U-Shape LED Cover Diffuser Track with Complete Mounting Accessories for Easy InstallationThis double sided tape to adhere the channels to the bottom of my cabinets.Nano Double Sided Tape,Removable Gel Grip Tape Transparent Sticky Tape,Reusable Traceless Mounting Adhesive Tape Heavy Duty for Fix Carpet Photo Poster,Home Office Car Outdoor Decor(2Rolls 9M/29.5FT)Good luck with your installation; enjoy your under-cabinet lights.
Recommended Products