Shopping Cart

Your cart is empty.

Your cart is empty.

WiFi 3-Phase Clamp Meter, Smart Home Energy Monitor with 3 120A Circuit Level Sensors |Real Time Electricity Monitor/Meter

Free shipping on orders over $29.99

$99.99

$ 47 .99 $47.99

In Stock

1.Style:321-200a


About this item

  • APPLIANCE MONITORING: Comes with three 200A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer etc. Support linkage with other tuya.
  • ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. measure Voltage, Current, PowerFactor.
  • REAL-TIME ENERGY DATA: Only support 2.4 GHz WIFI with an internet connection to monitor energy use with phone app. Provide 2-second data and are accurate from±2%.
  • EASY TO USE: Lightweight and easy to install,PC321-TY Power Clamp helps you monitor the amount of electricity usage in your facility by connecting the clamp on to the power cable.install 'SmartLife' APP. 200A (optional): 20mm.
  • IMPORTANT SAFETY INFORMATION:The power clamp must be installed and serviced only by a qualified ,Do not touch the terminals of the device during testing and turn off all the power supply for this equipment before installing.Keep you safe.



Product Description

smart home energy monitor

WiFi Smart Energy Meter,take command of your energy use.

3-phase clamp mete

For 80A-300A CT item, Real time monitor total current, power and KWh , and also show A, B, C each phase voltage , current, power and KWh consumption

energy monitor home power

For 80A-300A CT item, electric stastic , it can record hourly ,daily,monthly and yearly power consumped KWh value for Total and each phase separately.

monitor electricity usage

home automation energy monitor

The Power Clamp has a mounting bracket for mounting purposes.

1. Use the mounting bracket as template to mark the two holes on the wall for installing screws.

2. Screw the mounting bracket onto the wall according to marked location. Install wall plugs if necessary.

3. Locate the hooks of the mounting bracket and line up the hooks with the mounting holes on the Power Clamp. Fit the hooks into the mounting holes as the picture below. Installation is now completed.

automation energy monitor sense

Attach both ends of the Current Transformer Cables first like the picture shown below. Then spinning the waterproof latch clockwise until both ends have been tightened and secured.

energy monitor emporia

Open the clamp as shown below. Apply it on the electric meter cable. The arrow on the clamp should face to the correct direction of the electricity current flows (P1→P2or K→L). If the arrow faces the reverse direction, the reading meter will display 0.

1

Technical Specifications

Wi-Fi 802.11 B/G/N20/N40
RF Characteristics Operating frequency: 2.4GHz
Operating Voltage 100~240 Vac 50/60 Hz
Calibrated Metering Accuracy • ≤ 100W ( Within ±2W ) • >100W ( Within ±2% )
CT Provided CT 80A (default) • CT 120A/200A/300A(optional)
Operating environment Temperature: -20 ℃~ +55 ℃ • Humidity: ≤ 90% non-condensing
Dimension 86(L) x 86(W) x 37(H) mm

Cliente
Reviewed in Italy on September 2, 2024
ottimo semplice ma preciso
Dicson Vega
Reviewed in the United States on July 31, 2024
Llegaron dos toroides de los tres que vienen partidos, poniendo en duda la calidad de la medida.
Marc
Reviewed in Belgium on July 16, 2024
Surveillance consommation réseau
Caracolito
Reviewed in Spain on May 11, 2024
No es apto para medir con montaje 380voltios trifasico sin neutro ( montaje en triangulo )solo es para trifasico 220voltios con neutro ( montaje en estrella )Tengo que devolverlo
hce.privat
Reviewed in Germany on November 4, 2024
Schnelle Montage, übersichtliche Anlage, aufpassen das die Anschlüsse der nicht verwechselt werden, gibt falsche Ergebnisse. Gerät arbeit zuverlässig.
Joey
Reviewed in the United States on November 21, 2024
This product is FAULTY. It doesn't connect to wifi networks, it's NOT good for 3-phase systems, and the antenna is cable at the transmitter is frail and broke.I bought 2 and now I'm out $200. STAY AWAY!!
Cliente de Kindle
Reviewed in the United States on October 31, 2024
Best meter I've tested. Very easy to install, wire and setup. Unfortunately it is not supported in home assistant nor Google home so the only way I've found to monitor is using the app.
Al Sailor
Reviewed in the United States on April 13, 2024
This is a very nice product. There is a significant problem in the app because the usage graph axes are labeled with a tiny font in very light grey that can barely be seen. I wish this could be fixed.
Paul M.Barnett Jr.
Reviewed in the United States on August 23, 2023
Works well for monitoring of power usage. It would be better if it allowed cloud upload &/ or downloading of information for reports even if it's a per use or a subscription service
Caonabo Munoz
Reviewed in the United States on July 5, 2023
Nice equipment, very easy to install! Good transaction
Dr. A. E. A. Contoret
Reviewed in the United Kingdom on July 18, 2023
Needed to monitor 3 phase power usage in an office building and this works great. Connected to our WiFi via Smart Things app, so can keep am eye on power usage from my phone.
Gibran
Reviewed in the United States on December 18, 2023
Excelente product
Norman D. King
Reviewed in the United States on November 15, 2023
Works great. Easy to install
Recommended Products

$65.19

$ 27 .99 $27.99

4.6
Select Option