Your cart is empty.
Your cart is empty.Wayne 56671 Pc4 repair kit for use with all pc4's utility pumps. Includes shaft seal, impeller and gaskets.
Kayo Parsons-Korn
Reviewed in the United States on February 21, 2025
I was heartened by a video by Wayne on the web showing exactly the problem, water squirting out the bottom of the pump, just like mine was. Got the repair kit quickly enough, but it was a very complicated repair, not helped by Wayne's video which shows two types of backhead and propellers with different methods to take them out. Why not make two separate videos? Plus the man doing the demo moved so fast and didn't show you the parts on all sides once removed. I kept having to stop the video to try to get a glimpse of the part removed. Anyway, did get it all back together and then found the same problem again. So the repair didn't do a thing to fix the problem. I will have to get a new pump, but may be looking at other alternatives. I've only had this a couple of years.
Rebecca J Glashaw
Reviewed in the United States on February 19, 2025
exact replacement part be careful replacing the seal thank you
MDB
Reviewed in the United States on July 22, 2024
The parts were all the right ones and fit well in the pump. I wish there were some detailed instructions included. The installation tutorial by Wayne on YouTube is really quite awful. Several important steps were not even shown or explained on it. Either way the thing is pumping hard like when it was new. These pumps have become way to expensive to replace. They are simple and easy to work on.
Customer
Reviewed in the United States on December 26, 2024
Good product
M.J.B
Reviewed in the United States on October 11, 2024
Perfect replacement parts for my wayne 1/2 hp transfer pump. Recommend watching a short video on u tube first as parts come with no instructions. After watching video replacing parts was pretty strait forward and not difficult. Pump is pumping as it did when i first bought it. Very pleased.
Wayne
Reviewed in Canada on August 14, 2020
The kit was complete with all the necessary parts and the repair was straight forward.
Kindle Customer
Reviewed in the United States on June 27, 2020
I took a chance on this that it would be what I needed for the (apparently) identical pump under the Superior brand name, because I would not find a kit sold elsewhere specifically for that one, and I needed it quickly. Well, it seems like a good kit, but the instructions to replace the parts were woefully bad. I have to watch Youtube videos to figure it out. Bottom line: this kit may be perfect for Wayne pumps (I don't know for sure, or if maybe it was a design flaw), but the impeller does NOT fit the drive shaft for the Superior. The Superior has a metal receiver that is set into the plastic at the back of the impeller, and the bottom is relatively flush with the rest of the impeller rear surface - the outer surface of the receiver is flat plastic. The Wayne impeller is just a plastic receiver with a domed plastic front, and the shaft of the receiver extends out beyond the back face of the impeller. (Apologies if that does not make sense, I am not a technical pump guy) Bottom line is, I tried to sand off the extra length, but the threaded receiver wasn't long enough inside for the drive shaft. I tried Dremel'ing it deeper and re-threading it, but no good there either.Bottom line: while I am assuming the Wayne kit is good for a Wayne pump, it did not fit a Superior pump of the same design. I cannot be sure it was not a design flaw in the impeller in this kit, but either way, as a PSA, if you try to order this like I did, to repair a similar-looking cast iron 0.5hp transfer pump, it won't work with Superior, and I am not sure about Drummond or the other similar brands.
Customer
Reviewed in the United States on February 22, 2020
I actually bought this to repair my harbor freight comparable pump..... and to my surprise I got the parts swapped out and new ones (different brand) to fit in there and it works! A little bit of Ingenuity and dap plumbers grease and some cuss words and it’s working! Only thing I have to say about these pumps is if they run dry for 2 seconds it ruins gasket and leaks.....be extra careful inlet hose doesn’t accidentally come out of water supply for any amount of time.... at least that’s my experience.
William
Reviewed in Canada on May 4, 2019
Product was great, Fast shipping. Are use this product to repair a cast iron ridgid utility pump.
Clarke F.
Reviewed in the United States on August 13, 2018
But a star off for no instructions. Ended up figuring it out, but had to take pump apart and re-do. No instructions available on Wayne's site either. Fairly self explainatory but there were some guesses involved.
Recommended Products
$295.08
$ 99 .00 $99.00