Your cart is empty.
Your cart is empty.Product Description
1. Thermocouple plays the role of a sensor, it senses the flame, will transmit a signal to the solenoid valve in the control valve, the solenoid valve receives the signal before opening the gas, in order to successfully ignite and keep the flame does not go out.
So in the installation, the control valve and thermocouple should be well connected, so the control valve will receive the signal transmitted by the thermocouple, it will pass gas and ignite.
2. The thermocouple and ignition needle in the installation of the distance should be closer, so the thermocouple can sense the flame and the solenoid valve receive the induction, pass gas and ignite.
Step1: Fasten the thermocouple nut M8 on the valve end tightly.
Step2: Connect the plastic black bakelite knob to the valve ("D" Insert)
Step3: Connect your inlet and outlet hose on inlet and outlet side. (fasten it tightly enough in case of gas leakage)
Control Valve
Main Control Valve In & Out with 3/8" Male Flare thread
Low Working Pressure Max 1/2 PSI (65mbar)
Thermocoupler
Length 600mm
Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000)
Platic Black Knob
Diameter 44mm
"D" Insert for Valve 6.0-6.1mm
恭喜发财
Reviewed in the United States on February 6, 2025
I was having trouble keeping my propane fire pit lit because it kept shutting itself off. I bought this and ended up replacing the parts and it works perfectly! Stays lit, great pressure. Zero problems other than I broke the igniter so I’ll have to replace that next.
Great design poor quality.
Reviewed in Canada on January 15, 2025
Installed and works fine.
guppy66
Reviewed in Canada on September 4, 2024
Good product
SMILE...😊
Reviewed in the United States on June 23, 2024
This worked out great, I googled how to fix my gas fire pit and came across this item! I fixed it myself for a good price! Win win...😊
LeeMarie
Reviewed in Canada on December 8, 2024
We bought this for a 2nd hand fire table. Easy to install and works very well. it has only been on season of nonheavy use, but we are happy with it so far.
Andreas
Reviewed in Canada on December 31, 2024
We got a free fireplace that had a damaged safety valve kit. . Bought this to fix it, and it was a perfect fit. We've got a brand new firepit. It's also worth mentioning that our firepit is 55000 btu, and this piece works great.Definitely recommend
Master G
Reviewed in the United States on December 29, 2024
Replaced on allen & Roth round fire table, great fit and reliable!
Customer
Reviewed in the United States on November 23, 2024
Our deck fire pit stopped working. Wouldn’t stay fired up. Checked the web to troubleshoot and it suggested this could be the problem. Two of us together took pit apart and installed everything in this kit. It works like new now.
Dana Govang
Reviewed in Canada on November 1, 2024
Easy to install. Returned our fire table to perfect use.
John Grein
Reviewed in the United States on October 16, 2024
When I needed to rebuild a barbecue I was looking for this gas valve and couldn't find it at Ace Hardware or Home Depot or Lowe's instead I found it at Amazon. It was easy to install and well worth the cost!
Jeremy Lehman
Reviewed in the United States on January 11, 2024
The product is as described, unfortunately it did not fit my fire pit so its now sitting in a box in the garage.
wfuson
Reviewed in the United States on October 4, 2020
This valve and thermocouple was a direct replacement for a Veranda Harmony Classic fire pit. The product installed easily but clearly assumed the customer was knowledgeable about the product and installation procedures and precautions. The product arrived without any supporting information. Primary example was that no guidance about the use of gas rated thread sealer (paste, yellow tape, or ...). Since this a low pressure installation the sealer may not be required, but no guidance is provided. I did chose to use the yellow tape per guidance from other products. No installation guidelines such as “do not .....”, recommendations or access to customer support. I would have given this a five star rating if WADEO had provided any product information - either in hard copy with the product or a link to online information.
mj
Reviewed in the United States on October 15, 2020
My Hampton Bay (Home Depot house brand) Cross Ridge Gas Fire Pit Table would light, but not stay lit. This kit was suggested by their product support team. The price is right for the kit. The kit has a replacement thermocouple and a propane gas distribution and control unit.No replacement instructions in either the kit or the original product documentation, but the replacement procedure is pretty straight-forward. Tools are crescent adjustable or a 3/4 " open end wrench plus a Phillips head screwdriver. The thermocouple includes a long connecting tube that makes adjusting to a variety of fire pit styles and placements possible. The propane gas lines in the firepit are reused. Part has a standard propane fittings.The control was 90 degrees off from the original so either the control had to be off, or the propane hose connections shifted. I chose to live with the 90 degree rotation in the front control rather than attempt to bend the propane metal hoses into a different configuration. The control works exactly like the original.The job took me about 1 hour +/-. (doing it again would take 20 min.) After replacement the grill works fine, with a better range of control of the flow than the original parts before they broke.7+ months later: Works far better than original with more precise control and better range (both lower and higher gas flow). Firepit is now more usable and more used. Upgraded review to 5 despite no instructions.Does what a replacement part kit should do -- only better.
Recommended Products