Your cart is empty.
Your cart is empty.Product Description
- A Rivet Nut fastener is a tubular rivet with internal threads.
- It requires a tool or device to install in seconds from one side of the work.
- The added benefit of not only being a dependable fastener, but they are also ready to use with clean threads available for screw attachments.
- Rivet Nuts also are used when an application has little or no access to the backside as they can be installed from the front side of the workpiece.
Todd
Reviewed in the United States on September 6, 2024
I had purchased a rivet nut set with the tool and as you can see the silver rivet nut that came with the kit was much softer material. The carbon rivet nut (black) withstood a lot more torque. This was torquing an M12 at 55 foot pounds. When I went to remove the bolt it had completely cross threaded in the cheaper rivet nut. The carbon rivet nut held up to the torque and kept its shape.
Stephen D. Wall
Reviewed in the United States on September 19, 2024
Showed up on time, delivered carefully, well packaged.The overall quality was quite a bit higher than I had expected, mic’ed out exactly on spec, was the alloy promised, with excellent finish. Fit perfectly into recesses machined. Seems to perform well. I am very pleased with this purchase.Warning! Please order parts after doing due diligence. These are low-carbon stainless, great for some things, perhaps not the best for others. Despite my happiness, they might not be for your needs. Do the work.
Morgan Davis
Reviewed in the United States on June 4, 2024
There are many holes in the walls and framing of my Promaster van. Many of which are just the right size for an M5 rivet nut. I have added attachment points all over by just popping these in. Many of the interior panel plastic moulding fasteners went into holes this size, I replaced with M5 screws. M5 is quick and easy to install, and large enough and strong enough for many many uses. These blend in transparently with the dark paint seamlessly.
Brandon H
Reviewed in the United States on June 3, 2023
1/10 of them won't thread all the way through, maybe because of the colored coating.? Either way.. Definitely a pain if you already got them halfway clamped into fiberglass. So, make sure you test the threads on each one before installing.
Kent B.
Reviewed in Canada on October 5, 2023
They look good like good quality
Jon Logsdon
Reviewed in the United States on April 14, 2023
Worked well for mounting a roll pan on my truck
MB
Reviewed in the United States on May 13, 2022
This nut was installed in a 13mm hole without issue. It worked perfectly to repair a stripped frame mounting hole for an M10 x 1.5 tapped hole. I wish the vendor would supply some reference for the stroke distance. I used another vendors dimensional data to calculate what the stroke distance for this nut should be based on my material thickness.
Margiawan
Reviewed in the United States on November 2, 2022
It worked to mount my electric bike
Bambamvdrummer
Reviewed in the United States on January 28, 2022
They worked great in solving a missing hardware problem with a futon.
Recommended Products