Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Foam Tubing for Handle Grip Support, Pipe Insulation, 25mm(1') ID 35mm OD 1m Length Black

Free shipping on orders over $29.99

$11.79

$ 5 .99 $5.99

In Stock

1.:3mm X 12mm


2.Color:Black


About this item

  • Foam Tubing- 25mm inner dia, 35mm outer dia, 1m(3.3ft) total length. Suitable 24-25mm OD pipe
  • Rubber Material - The tubing is made of Rubber material, soft and durable, can be used repeatedly. Working temperature is -40°C to 80°C(-40°F to 176°F)
  • Advantage - High elasticity, strong tensile, easy to bend, and aging resistant
  • Non-slip - Anti-skid foam is fixed on tools or appliances and is not easy to slip.Please note that when inserting the rod, it could be easier to insert to the foam tubing with using some lubricant or water on the rod surface
  • Widely Application - It is used to protect the handle, such as for fitness equipment, utensil, etc. heat preservation insulated for pipe, increase the softness, anti-skid and wear resistance, heat insulation. The smaller foam tubing is suitable for use with tools, pens and other items with small handles. The larger foam tubing is suitable for use with the handle of fitness equipment



Product Description

1

  • Foam tubing for handle grip support
  • Made of rubber material, soft and durable, can be used repeatedly
  • High elasticity, strong tensile, easy to bend, and aging resistant
  • Anti-skid foam is fixed on tools or appliances and is not easy to slip
1

Widely Application

Used to protect the handle, such as for fitness equipment, utensil, etc. heat preservation insulated for pipe, increase the softness, anti-skid and wear resistance, heat insulation


Elise H.
Reviewed in the United States on March 8, 2025
Worked great for replacement on stroller. Better than the original. A little wd40 and slid right on. Dried nice and tight. Be sure to measure your inner diameter.
John H.
Reviewed in the United States on January 26, 2025
Exactly what I need, at a very reasonable price. Remove old grip, spray tube and inside new grip with a little soapy water and slide into place. After the water dries, grip is as good as new.
M.E.S.
Reviewed in the United States on March 13, 2024
Had a bike rack with two padded hooks on it that had been in the outside elements for 4 years. They had seen better days and I lost some paint on my bike frame due to me not acting sooner. This section of tubing will give me 4 sections to cover the metal tubing on the bike rack. Tubing outside diameter is smaller than my original, but the inside diameter was spot on. Sprayed some alcohol inside and slid the tubing on easily. This should last another couple years and then I have another set to put on as well. Good deal.
LEROY
Reviewed in the United States on November 21, 2024
I bought this to enhance the grip on my lat pull down bar. It’s way too soft and rolls in your hand.I’m sure it works well for pipe insulation but don’t buy it for your gym. Not the right thing.
Robert Trewin
Reviewed in Australia on October 3, 2024
The tubing was great quality product to replace the outside exposed refrig lines running from my air con
ricardo molina
Reviewed in the United States on October 23, 2024
Used this on my 1" dumbbell handles and 1" barbell. I have broken several bones in both my hands. My left palm hurts when doing bench press, bicep curls or shoulder exercises. These have helped in relieving the pain in my hands.
STrout
Reviewed in the United States on October 10, 2024
I used this to replace the foam on the handle of a SunJoe Electric push mower. Fit perfectly and seems to be holding up good.
rsholmes
Reviewed in the United States on July 13, 2023
I used this to replace the rotting foam on my lawnmower handle. I measured the handle diameter at 22 mm so that was the inner diameter I ordered. The tubing came flattened and rolled up but once it was on the handle it was fine. I cut the tubing to the right length, and partly disassembled the handle to free up one end and remove a part that was in the way. I stripped off the old foam and cleaned up the handle with 90% isopropyl alcohol. Then I splashed more alcohol on the handle and poured some through the tubing to act as a lubricant. The tubing slid on easily. Then I replaced the part and re-attached the handle end. At first the tubing still was pretty mobile but after a few hours the alcohol had evaporated and the tubing was snug. It seems more durable than the original foam.
Eva M. Saller
Reviewed in Canada on January 16, 2023
The originals tore on my Elliptical, found them and they are a great replacement fit
Customer
Reviewed in Canada on May 4, 2022
I bought this to pad the neck holder of my guitar rack (Hercules Stands GS523B) ... fit snug (used some light oil to slide it on) and does the trick :)
Dave Banks
Reviewed in Canada on April 1, 2022
I'm using this tube for lanyards which is soft on the back of the neck
Customer
Reviewed in Canada on September 22, 2021
Good material. Replaced the rubber exterior on my hot tub. Went on easy. Is a bit 'slippery' due to the exterior surface being less porous but think it will stand up better to UV rays and not break-down as easily.
Eric Hwang
Reviewed in the United States on August 26, 2021
This tubing insulation is just what I needed to give new life to my tripod. The foam pipe insulation I had around it before was starting to disintegrate and was looking shabby. This foam tubing isn't like the foam insulation for water pipes. It's more like neoprene material, except without the outer fabric layer. It really does insulate (more on that later) and provides a nice grippy surface to hold onto. The only problem is the way it is folded, presumably for shipping.The tubing was shipped in a plastic envelope and was folded twice leaving three creases. These creases are permanent and unsightly. It ruins an otherwise beautiful covering. I tried using the same methods of removing creases from neoprene—pouring boiling water over the creases and inside the tube. Even with boiling water inside the tube, I could comfortably hold the outside of the tube, verifying the insulation performance. While the boiling water relaxed some of the smaller creases, the deep creases stayed. Even after letting it sit for 24 hours, the creases remain.A note on installing. These tubes are bit snug to keep them in place. This tube's ID is 28mm. My tripod leg is 28.1mm. The tubing will stretch a little, maybe ±1mm. Carefully measure the round part where you plan to install this, preferably with calipers.To install them, DO NOT USE any sort of petroleum lubricant such as WD-40 or grease. The tubing will slip and not stay in place if you do. To help slide it onto whatever you're mounting this on, use 91% rubbing (isopropyl) alcohol. DO NOT USE ethyl alcohol. Clean the surface where it will go with the alcohol, then pour some inside the tube and swish it around. While it's still wet slip the tube onto the surface. The alcohol gives just enough lubrication to allow the tube to slip. If tube starts to stick, lift up an edge and pour a little bit more alcohol inside. The alcohol will eventually evaporate and the tubing will stick to the surface and stay in place.For the product, I give it 5-stars. For how they store and ship it, I give them 1-star, so overall, 3-stars.
Recommended Products