Your cart is empty.
Your cart is empty. 1. The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part. All materials are in line with SGS testing standards.
2. There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
3. Three wire connection: Red for positive, black for negative, yellow for pulse signal.
Specifications:
Product Name: Water Flow Sensor
Material: POM(Shell)
Liquid Temperature: Not More Than 60C
Rated Voltage: DC 130V
Max Current: 0.3A(DC 130V)
Maximum water pressure: 1.2MPa
Connector Size: 8mm
Connector: Male XH-3P
Ingress Protection Rating: IP65
Color: White
Package Included:
1 x Water Flow Sensor
Note:
1. Installed in accordance with flow direction in the back of product, otherwise there is no signal output.
2. A filter screen must be installed at the inlet of the sensor, in order to avoid particles and debris entering the sensor .
Eric L.
Reviewed in the United States on September 11, 2023
Well it's okay.. unfortunately my first one only lasted 2 months we will see
IamPain
Reviewed in the United States on August 3, 2023
Perfect replacement for the stock water flow device on my K40 laser.
Mark
Reviewed in the United Kingdom on December 23, 2022
Great price, working well on my laser so far !
Steve Masuch
Reviewed in the United States on April 6, 2022
Replaced the flow sensor on my 100w CO2 laser because it had too much of flow resistance. This one you can blow in it and it hardly has any resistance but switches on fine. This one is longer and has a higher flow rate also.
William dalling
Reviewed in the United Kingdom on September 26, 2021
Used on k40 laser cutter.....just put in series with laser enable switch...job done.
Arranaika Karan
Reviewed in the United States on June 20, 2021
I'm using this as a coolant interlock on my laser cutter. Works perfectly for that application. Tested it several times and it opened and closed the circuit as expected.
L. Howard
Reviewed in the United Kingdom on March 26, 2021
This works well as a flow switch for my K40 laser.When the water stops running the laser head does not fire, albeit the gantry does continue to run.I would only add that the wires are not very long so if you are purchasing this for a K40 and you want the switch to sit outside the laser machine (I felt it best as water and electricity don't mix) then you may want to have some additional wire to hand.
John K.
Reviewed in the United States on February 17, 2021
This is a nice flow switch, it's very light weight, material appears to be resilient and the magnetically operated switch is isolated from the liquid flow. This flow switch is intended to be used with clean water but may be impervious to other fluids and an inline filter might be needed to alleviate damage to the impeller inside the switch. I will be using this as treated coolant water flow interlock for my spindle motor. I sequenced this switch 50+ times and had 100% closures and opens. The switch is a small reed type switch and I would limit the current flow to 200. mA or less (ac/dc) and put an R/C arc suppressor (220 Ohm in series with 0.1 Mfd @ 600 v) across the switch terminals to improve the life of the contacts especially for inductive loads. JK
Randy J
Reviewed in the United States on January 22, 2021
Using this as a safety interlock for my K40 as I'm sure others are.One of the things I was worried about was using this as an input to a 54HC21, my door safety switches, temperature safety switches, etc. all need to be debounced. That does not appear to be the case here, the output is honestly pretty clean with no bouncing on the contact or disconnect.
Rye Gewalt
Reviewed in the United States on June 20, 2019
Seems to restrict flow quite a bit.
Bill
Reviewed in the United States on November 28, 2019
Great product at a great price. Used this as a safety switch if the coolant stops flowing on my CO2 laser to prevent a damaged tube.
Recommended Products
