Your cart is empty.
Your cart is empty.iU2-C is a precise meter that measures UVC radiation. This meter measures UVC light from artificial light sources. Applications of iU2-C include : Monitoring UVC (e.g. s t e r i l i z i n g) Lamp Intensity & Aging; Testing Eyewear UVC Blocking Capabilities; Measuring UVC Lamp Fixture Leakage. Widely used in Home, Office, School, Restaurants, Clinics, Hospitals and Industries etc..Specifications: UVC Measurement Range 0 to 3000 uW/cm2 Spectral Detection Range 220 to 280 nm; Peak point of Spectrum 254~265 nm. The peak absorption wavelength of most D N A is about 265 nm; Measurement accuracy +-4% or +-1 digits Resolution 1.0 uW/cm2 Power Supply Two AAA Alkaline Batteries; Dimensions 67x124x25 mm (2.64x4.88x0.98") Weight 123 grams (4.34 oz.) with batteries. MATERIALS SUPPLIED : UVC Light Meter; Protector Bag; English User Manual; Two AAA Alkaline Batteries. Please note that the actual wavelength of some UVC labeled LED lights exceeds 280nm. The test result with this product will be zero.
九尾のあーちん
Reviewed in Japan on April 11, 2024
センサーは、GUVC-S10GDで、ピークは、265nm。254nmにもピークに近い応答があり、殺菌灯用の強度計ではメジャーなセンサーだと思う。Genicom (gen-uv) の UV-C Sensor のページからデータシートをDLできる。電源スイッチが、押すと斜めに倒れるような不安定な感触でこわい。中を確認すると、スイッチの取り付け方が無理やりで、すぐに壊れそうだった。補強して使っているが、それがあるので、あんまり人にすすめる気になれない。米Amazonのレビューに不良品の報告が複数あるが、なんとなくわかる気がする。ただ、自作や簡単な修理が得意な人には、いじりやすい感じがする。ポータブルにしては珍しく、センサーや電池ボックスの配線がSHコネクタで着脱できるので、基盤に手を加えずに、外部電源や別のセンサーを接続することができ、GUVC-S10GDを入手して、プローブを自作することもできる。ケースも、外部接続端子や降圧レギュレーターくらいなら入れる余裕がある。
Daniel L.
Reviewed in the United States on August 18, 2022
The device quite literally broke before I could try it out.I put the batteries in, turn it over to test it out, pressed the button and the button fell into the device. I had no way of turning the unit on and off. I tried to dismantle the unit to fix the buttong, but with its shoddy build, I was neither able to get the button back to working condition or get the unit back together.
Baloo
Reviewed in the United States on March 9, 2022
Didn't work, got a replacement, didn't work, returned for refund. Tested 6 inches away from a 25W 254 nm bulb and it kept reading zero for 2 mins. I know the bulb is emitting UVC because a simple dosimeter card turned bright pink (unexposed card shown next to it). Shame, I didn't want to have to spend 4x more but I have no choice. Maybe you'll have better luck than me.
田中英一
Reviewed in Japan on February 25, 2021
ウシオ電機でエキシマランプcare２２２の測定で220~280の波長との記載があり222nmを実測する為購入しましたが反応がありませんでした。254nm専用との記載があればと思います。
W C Fields
Reviewed in Canada on December 16, 2021
seems to work , not sure about it's accuracy +/- 4%, would not read past 2503 um/cm2, apparently that's maxed out. tested on 4 different lamps./bulbs, 2 of the 4 lamps are on the expired list with more than 14000 hrs . contacted tech department and confirmed that. it doesn't read full scale as advertised.. Next lamp change will test output of brand new lamp to get a base line for future reference. Note : even a dead clock is right twice a day.
Customer
Reviewed in the United States on January 22, 2021
Didn’t work. Had to return it.
DenverGuy71
Reviewed in the United States on August 9, 2020
Not sure it is detecting any length of UVC light. I tried to test 3 different, brand new, UVC lights from two different manufacturers and the reading stays at 0.I am going to try 2 other brand new UVC lights to see if I get any reading.I will update this review after my next series of tests.UPDATE: I tested three additional UVC lights, from two different manufacturers, and the reading stays at 0. I changed the batteries from those that were included, same result, a 0 reading. In total, I have tried to test 6 different UVC lights, all within the wavelength range of this detector, and all tests showed a 0 reading. I ran my tests starting with the UVC light off, turned on detector, then turned light on, the detector showed 0 on the display. I then tried my tests with the UVC lights on, then turned on detector next to UVC light, still 0 on the detector display. I left the detector next to the UVC lights for several minutes, still 0 on the display. I am sending this back. This particular detector does not work
GotBach?
Reviewed in the United States on August 11, 2020
It works great, but I wish that it had a memory function. I had to use my cellphone video camera to monitor the meter while I was out of the room so that I could use it without damaging my skin or blinding me. The reason for the 4 stars instead of 5 was due to the difficulty in monitoring the meter. Hopefully nobody will just stand in front of their uvc light and watch the meter. Uvc is dangerous (for those that don't know).
Michael Chung
Reviewed in the United States on July 31, 2020
The media could not be loaded.
Duy Truong
Reviewed in the United States on November 30, 2020
The media could not be loaded.
Michael Kostukov
Reviewed in Canada on November 15, 2020
It seems like quite a few devices in this batch are defective. As some other reviewers have also noted - my device had 0 reading indoors / outdoors / in the presence of 2 different UVC lamps (known to be functional). Reseating batteries had no difference. I would not trust these devices and will be asking for refund, not replacement.
stafford
Reviewed in the United States on October 25, 2020
I have used this to verify some UVC lights that I also purchased online. A Coospider UVC light that I bought registered 3000 on this meter and when blocked by glass the reading dropped to 0. So, the both of them verified each other. The one thing not good about this meter is that the detector is not in a wand so the only way for me to safely measure UVC light was to cut a cardboard box to encase the light and then put the turned on UVC light and box over the detector part of the meter while still allowing me to see the meter reading.
Recommended Products
$36.80
$ 18 .99 $18.99