Your cart is empty.
Your cart is empty.Product Description
NOTE
Due to the sensitive temperature monitoring components in the transmitter, it is necessary to allow the transmitter to stabilize to room temperature before accurate room temperature are displayed, If the transmitter is activated from a severe cold condition allow 15 minutes for accurate temperature reading to appear on the LCD.
Important Safety Information
- Read this manual thoroughly prior to installing, programming or operating any remote control.
- This remote control system is designed for use with a millivolt or 24V gas valve system. Do not use this remote control system on applications with voltages above 24 Volts AC/DC and 1 amp current.
- This remote control system requires two (2) “AAA” and four (4) “AA” alkaline batteries to power the transmitter and receiver.
- Turn appliance OFF (at the appliance or remote receiver) if you are away from your house for a long period of time.
Transmitter
- This Fireplace remote control can control the fireplace thermostatically or manually with On/Mode/Set/Off operation.
- The transmitter will operate the remote receiver from 1foot to a maximum of 30 feet.
- Features a blue backlit LCD display, making it easy for you to check the temperature display at night.
Receiver Overview
- The receiver uses four (4) "AA" batteries.Battery life is also significantly shortened if batteries are exposed to temperatures 130ºF or higher.
- The 22-inch plug-in connection cable makes it easier to install, use, and replace the gas fireplace remote control kit.
Black and White Wall Cover Plate and wall clamp
- Allows you to choose the appropriate installation plan according to the environment. Make your installation look more beautiful and better integrated into your furniture environment.
LEARNING TRANSMITTER TO RECEIVER
- The transmitter privacy (DIP) Switches are preset at the factory. Setting the 4 bits DIP Switches on transmitter to select a security code.
- Put the receiver slide switch to “REMOTE” location. Using a small screwdriver or end of a paper clip gently press and Hold the LEARN button on the receiver to accept the transmitter security code upon initial use, When you release the LEARN button the receiver will emit an audible “beep.
- After the receiver emits the beep. Press the transmitter “ON “or “OFF” button and release at once. The receiver will emit several beeps indicating that the transmitter’s code has been accepted into the receiver.
- If you are unsuccessful in matching the security code on the first attempt repeat step 1-3.
Part Description
- Brand: Totalix
- Package Includes: 1*RCB04A Transmitter remoter
- 1*receiver box
- 1*wall plate with Slide Button Black and white
- wall clip, screws, 22" wires with connectors and instruction manual.（Batteries not included）
"About us"
Totalix found in 2019. We are committed to providing customers with high-quality home appliance replacement parts and professional service. We have built our own supply chain globally, fully involved in product development, ensuring that customers get well-qualified products.
JP Athey
Reviewed in the United States on March 11, 2025
Works great!
Don S.
Reviewed in the United States on February 3, 2025
Easy install.
Customer
Reviewed in the United States on February 18, 2025
Easy to install and program with the remote. Works great for my continental gas fireplace
R Naiser
Reviewed in the United States on January 6, 2025
This upgraded gas fireplace remote kit is good quality. It is easy to set up. The temperature display is nice, our old one didn’t have this feature. I wasn’t able to use the wall mount, but can see how that would be an added benefit. Overall, I am happy with this product.
Bryan C
Reviewed in the United States on January 4, 2025
After a 4 day wait to get this junk I find that there is no output voltage in any switch position. 0 Mv I’d give it a zero if I could.
Paul Cavenaugh
Reviewed in the United States on January 31, 2025
Great product, works seamlessly with my existing log set. What a great buy! Would be several hundred bucks for a thermo controlled remote from a dealer. My log set can now be set on a specific temp, set and forget. Huge upgrade from my previous on/off remote.
TLau
Reviewed in the United States on January 25, 2025
I have a gas fireplace that uses a Skytech remote that recently stopped working. This replacement remote controller kit is an upgrade over my old remote, featuring an automatic temperature control. The kit came with the remote controller, the receiver, wires, and some mounting hardware. A black and white wall plates are included in case you want to wall mount the receiver. The included wires will be too short for a wall mounted option, so you will need to extend the wires by splicing them.My old receiver sits under the fireplace, so I did not use the wall mount faceplates. The wiring was plug and play, and all I had to do was to unplug the old receiver from the fireplace gas valve and plug the new receiver in with the 2 included wires. The opposite end of the new wires plug directly into the new receiver with a wiring harness. The only thing I did not like about the new setup is the new receiver takes 4 AA batteries, which are not included. My old Skytech plugs into an AC outlet in my fireplace so it did not need batteries. Off season, I would have to remove the batteries in case they leak. It would have been nice to have a wired option so the batteries are not required. The new remote takes 2 AAA batteries, also not included.After swapping out the receivers, the remote was able to turn on the fireplace right away. The entire installation took less than 10 minutes, and was very easy. If you have more than one fireplace, and you intend to use another one of these kits on the other fireplaces, make sure you change the security code on the remote to prevent crosstalk between the fireplaces. It is probably good practice to change it anyway, just in case a neighbor has the same kit.The automatic temperature control works fine, and the fireplace shuts off when the desired room temperature is reached. It does turn the fireplace back on when the room temperature goes back down. I really like the backlighting on the remote, making it very easy to read in a dark room.Overall, I think this is a great replacement kit for any fireplace that uses a millivolt gas valve. It is well-made and very simple to install, and the backlit remote with adjustable temperature control is a real star.
J. Rydell
Reviewed in the United States on January 24, 2025
Bought for gas fireplace i just got worked purfect took all of 5 minutes to set up
Recommended Products
$25.97
$ 12 .99 $12.99
$145.00
$ 71 .99 $71.99