Your cart is empty.
Your cart is empty.The TOGGLER SNAPTOGGLE is no ordinary toggle bolt anchor. It is in fact arguably the best anchor on the market today; with its simplicity and speed of application, massive range of applications and fully tested, huge 'tensile pull out' and 'shear' strength. It is the ultimate answer to some of the most awkward and demanding tasks that professionals face when fixing to hollow materials such as cavity walls and ceilings. Other toggle bolt fixings are usually clumsy and difficult to install, ruin the rear side of the wall when over tightened and require a huge hole to be drilled to fit the anchor through. The SNAPTOGGLE, on the other hand, can be installed in less than 10 seconds thanks to its pivoting head and patented strap design, its weight distribution over the entire solid metal channel head prevents any damage being done to the wall or ceiling, and the BM5 and BM6 anchors fit through a small 13mm hole!
Jason
Reviewed in the United States on January 26, 2025
These anchors are tough and sturdy, o went to both Lowe’s and Home Depot, both broke trying to Install them. Not sure how these home improvement stores survive, when you can’t find basic parts and DIY stuff. Completely unrelated but Dang I miss radio shack
Sheila Mills
Reviewed in the United States on August 22, 2024
Had several heavy pics to hang. These are great. Solid anchor in the wall.
Denise Hafermann
Reviewed in the United States on July 4, 2024
I used these to put up the hanging rail for a wall-mounted closet system, heavy steel picture ledges, and a wall-mounted pantry cabinet. They are easy to install and strong. I am confident they will hold the weight of the items without ripping out of the drywall. The toggle is held in place in the wall separately from the screw, so the screw can be be removed without losing the toggle. Very nice feature!
Did
Reviewed in France on July 2, 2024
Tout à fait ce que j'attendais de ces chevilles pour mon support télé
Customer
Reviewed in Canada on July 14, 2024
Bought a pack of these to mount a Samsung frame tv into a wall where the stud locations wouldn’t work.The brackets for the tv are solidly mounted and the tv is hanging perfectly with the wire hidden.Will def use these again.
Kirby S.
Reviewed in the United States on February 10, 2024
Not sure if mine were old or I did something wrong but I lost 2 of mine when they broke and dropped down behind drywall. But the other 2 worked.Also- I was using as extra support for a super slim TV mount. Keep in mind you’ll probably have to use a drill bit to “sand” down and rub the tv mount hole SLIGHTLY bigger in order to get these thru that slim TV mount hole.Maybe that’s how I broke the first 2 when I tried forcing them thru TV mount hole too hard….The 2 I got to secure were backing up 2 other screws I got into studs so I should be fine.
JORGE ALVAREZ
Reviewed in the United States on December 25, 2024
I actually do like these. They’re so much more easier. I think the only downside is sometimes they just don’t work. Maybe it’s the screwdrivers honestly. but 8 out of 10 it always worked for me. Especially my closet my shelf finally fell because the amount of jeans I have. I made new holes and added these and they just feel more secure now until I have to eventually get like a wooden type of shelf.
Shiddoh
Reviewed in Germany on June 18, 2023
Wir haben leider nur sehr dünne Wände und hatten anfangs Schwierigkeiten die richtigen Dübel zu finden mit denen wir auch schwere Sachen anbringen können. Aber mit diesem Produkt hat das ein Ende. Wandkratzbaum, Fernseher etc. alles problemlos an die Wand gebracht
Geoff
Reviewed in the United Kingdom on December 8, 2023
I used four of these to install a heavy metal kitchen pan rack to a plaster wall with studs. One side aligned with a metal stud, so the anchor went inside the stud. The other side was just through plasterboard. It worked well on both sides, as the metal part that lays flat to the wall from the inside allows for a very strong connection. Extremely useful for attaching heavy things to plaster walls, into metal studs or otherwise. I think it's stronger than most other anchors. The heavy kitchen pan rack has been holding very sturdily.Installing them can be tricky. I experienced a problem where the bolt would refuse to go in after installing the anchor (despite working perfectly when testing outside the wall). Likely this was because dust went into the threads causing a jam. I ended up wasting a few anchors in this way. Eventually figured out a reliable way to make it work by using some WD40 before twisting in the bolt.
Frank Finch
Reviewed in the United States on August 7, 2020
I purchased these for a second different application to install our wall mount for a 55" flat screen TV. Our home has metal studs and, definitely not located where we wanted our screen mounted. Four of these would hold the TV and heavy mount with no problem.I opted for 6 because the holes in the mount were there. One of the toggles broke off and slid inside the wall. No big deal, 5 of these worked great! Definitely a great product.
L
Reviewed in the United States on March 16, 2017
I wanted to mount my televisions on the walls of my new home, but exactly where I wanted to place them didn't always agree with stud placement within the walls. My brother told me about Toggler Snaptoggles and told me installation would be a breeze. I have 3/4" drywall and chose the size of Toggler meant to handle multiple times the weight of my TV and its hanging device because I knew that the greater the distance the TV was extended from the wall, it effectively weighed more than a static, wall hugging arrangement. I'd used a variety of anchors for drywall and masonry before, and have been pretty disappointed-I had my doubts and pricey electronics at stake.My brother made these sound like miracle products that a blindfolded animal without opposable thumbs could apply in short order. I'm very pleased to find that he wasn't exaggerating-much! My Togglers were, I think, repackaged from bulk and came quickly, but without instructions. I found the manufacturers website, read up on them and watched the tutorial videos. They were exceedingly easy to install and are really innovative! I'm a perfectionist fuss-pot type and it took many hours of calculations, measurements, and even making a template so that the televisions would rest exactly, "perfectly" where I wanted them. (This gal's got priorities, after all!) Once I drilled the holes in the drywall, I inserted the Togglers, leveled them, and snugged them in very tightly just like I saw in the video. Super easy and the first TV took about 20 minutes to hang....but I'm a little slow and deliberate. Second TV was up faster and they've been up for over a year and a half, with mild seismic activity in the first year (wall shaking/cracking construction nearby), wide variations in weather and temperature-both TV's are mounted on outside walls, and the TV mount bolts are as tight and secure as the day they went in! No wall damage, no problems and I've used these since to affix other heavy things to drywall in full confidence!I think the maker merged with another company but just search for the site using Toggler Snaptoggle and you will find a chart to help you calculate which size you need based on the weight of the item, the thickness of your drywall or wall construction, and how many bolts you will use. You'll find lots of helpful information, and if you're like me, your faith in wall anchors will be renewed!
Andrew Preece
Reviewed in the United States on April 23, 2017
I have never written a review for a product before but my experience with these compelled me to write my first. I purchased them to hang a tv where I only had one stud to work with. This product is the first result when searching for methods to accomplish this. And I'm not sure how. I followed the instructions and drilled the 1/2" holes required, insert the Toggler, zip them down and break off the strips. Then went I went to screw on the mount to the first Toggler, the metal "toggle" part broke away from the cheap plastic and fell down inside the wall. I thought, I may have just received a defective one and went to plan B for that hole. The second one appeared to work as intended. Then the third did the same as the first. By then I had it with this product and decided to go a different route. But the next disaster is trying to remove the product from the walls to replace them. There is no way to back them out once they are installed. You have to break the plastic flange to get them back out. Fortunately two were already broken during the install. Save yourself the effort and look for the EZ Toggle product found anywhere. They were much easier to use and worked in my already 1/2" drilled holes.
Recommended Products
