Shopping Cart

Your cart is empty.

Your cart is empty.

Tier1 Pool & Spa Filter Cartridge 2-pk | Replacement for Dimension One 1561-00, Pleatco PDO75-2000, FC-3059, C-7367, Aladdin 17541 and More | 75 sq ft Pleated Fabric Filter Media

Free shipping on orders over $29.99

$57.14

$ 28 .99 $28.99

In Stock

1.ItemPackageQuantity:4


  • Compatible Models: Replacement for Dimension One 1561-00, Pleatco PDO75-2000, Filbur FC-3059, Unicel C-7367, Excel Filters XLS-7005, Aladdin 17541, Baleen AK-60035, 710-215, 01561-00-A, CCP319 filtration cartridges
  • Keep the Water Clean: The pleated fabric filter maximizes contact between filter media, allowing for greater capacity and reduction. The durable & washable 75 sq ft fabric has tight porosity and a dense weave which sifts out unwanted hair, leaves, dust, sediment, sand, etc. with a high strength, high flow design.
  • Fit and Dimensions: The cartridge is designed for systems that use a 7 1/4 Inch (Outside diameter) x 10 5/8 Inch (Length) spa or pool filter.
  • Easy to Install & Maintain: Fits and performs just as well as the original equipment manufacturer product. It is recommended that you change your pool or spa filter when the pressure gauge on the filter tank reaches 8 psi above the pressure recorded when first installed.
  • Quality Standards: Tier1 filters pass rigid design, manufacturing, and filament testing delivering a product that is built for performance and priced for value



4.7 out of 5 stars Best Sellers Rank
  • #71,573 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
  • #774 in Cartridge Pool Filters
Is Discontinued By Manufacturer No

Product Description

From Tier1, Your Leading High Quality and Maximum Performance Brand

Tier1 products and filters are tested to meet rigid quality standards to ensure you are receiving the best possible Tier1 product. From design & manufacturing, all Tier1 filters are inspected, tested, and cut in half to provide with high quality and maximum performance for your water filtration needs. Tier1 replacement filters deliver value with the performance you expect. Our Pool and Spa filters will clean your water faster and more efficiently with less wear and tear on your pump. Dive in with Tier1, the water's great!

Compatible Part Numbers

01561-00-A | 1561-00 | C-7367 | FC-3059 | PAS-1223 | PDO75-2000 | TIER1-PAS-1223 | CCP319

TIER1-PAS-1223, Pool and Spa Filter, Castle Top, Special Lock Bottom, 75 sq ft. of Pleated Media

Tier1 brand replacement for 1561-00

Comparables

Tier1 PAS-1223 Replacement Pool and Spa Filter fits the Dimension 1561-00. Tier1 Pool and Spa filters will protect your investment engineered to outperform the competition and exceed your expectations.

High Quality Filtration

Featuring high durability filter fabric that maintains strength even when loaded with sediment, a tighter porosity and denser weave to capture more contaminants in less time.

High Flow Rates

A high strength, high flow core designed to support the filter while providing efficient flow rates.

Features

  • Bottom Hole Size: Special Lock
  • Top Hole Size: Castle Top
  • Media Weight: 3 oz.
  • Media Surface Area: 75 Sq. Ft.
  • Actual Size: 10 5/8 inches (length) x 7 1/4 inches (outside diameter)
  • Filter Media: Pleated Fabric
  • Filter Life: 3 Months

Features

pleated fabric, increased surface area, pool filter pleats

Pleated Filter Media

Pleated filters are more structurally stable than non pleated and also maximize the effectiveness of your filter by exposing contaminants to an increased surface area. With more high durability fabric to sift out unwanted particles you can rest easy knowing your water will be clear for the lifetime of the product.

cleaning filter, pool filter, filling pool, garden hose pool

Washable Pleats

Extend the life and increase efficiency of your filter by cleaning it with a gentle stream of water. When you're filling your pool, remove and rinse your filter at the same time! Do not use high pressure pressure hoses or abrasive brushes as this can damage the filter. Tier1 also offers a Pool Filter Wand Brush that attaches to the end of any standard garden hose.

Clean Water, Bright Pool, Tier1

Sand and Sediment Reduction

Keeps your pool clean and pump free from sand and sediment that would otherwise cause damage or equipment failure.

Easy Installation and Maintenance

  1. Replace your filter when the pressure gauge on your filter tank reaches 8 psi above the pressure recorded when first installed.
  2. Turn off the power to your pump and bleed the excess air pressure of the system using the air valve on the filter.
  3. Remove any band clamps and/or lids to your filter.
  4. Remove the cartridge from the filter canister and dislodge any loose debris
  5. Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and any band clamps.
Tier1 Filters, Filters by Tier1, High Quality, Great Value

Jimi
Reviewed in the United States on February 3, 2025
Perfect fit. Renewed the flow to the pumps for stronger jets.
ZackDee22
Reviewed in the United States on January 17, 2025
Good price and fast shipping
Robert A Laugier
Reviewed in the United States on September 15, 2024
Perfect, much cheaper than the price I was paying for one with the Jacuzzi place at home
german girl
Reviewed in the United States on August 31, 2024
Replacement filters for our spa. Good product for good value. Work great.
rchatto
Reviewed in the United States on July 1, 2024
I bought this filter from Amazon for half the price for what I was paying to the Spa place. Perfect fit too. The filter from the spa place will loose it's integrity within 2-3 years and it would be hard to remove from the housing, This one looks like a better build, only time will tell. I am happy with the purchase.
Nana
Reviewed in the United States on December 11, 2024
This 4-pack of spa filter cartridges is consistently reliable. They’re easy to install and do a great job keeping the water clean. Excellent quality and value for maintaining my spa!
Ibbledee
Reviewed in Canada on April 23, 2021
So much cheaper than the ones from the hot tub stores. Fit perfectly and would definitely buy again.
D Beaton
Reviewed in Canada on May 20, 2020
They work great
Jerry Hecht
Reviewed in the United States on November 7, 2020
Looks, fits, performs just as good as a store bought filter. Only difference, this one was less expensive!
Jason B.
Reviewed in Canada on November 18, 2020
Perfect fit for my dimension one tub.Great price.
Aimee J
Reviewed in the United States on April 1, 2020
perfect replacement for the Dimension One 1561-00. Only difference I see, other than saving a bunch of $$, is that the molding on the top does not have the direction arrow in it. If you need that arrow, perhaps you shouldn't own a hot tub. Highly recommend to purchase this if you need filters. It also arrived a day earlier than expected.
Customer
Reviewed in Canada on October 17, 2019
Exactly as shown.
Jimmy Wong
Reviewed in Canada on October 11, 2019
Perfect better than buying in a spa store
Recommended Products