Your cart is empty.
Your cart is empty.Product Description
Greecl
Reviewed in the United States on March 3, 2025
Wanted an easy to use and accurate stud- finder. I found it in this one. I tried several others but could not find the stud I knew was there. This one worked very well.
Cell
Reviewed in the United States on February 24, 2025
So far I love this stud finder. Simple and to the point directions on calibration.
CasinoAngel
Reviewed in the United States on February 12, 2025
I tested this stud finder right out of the box, and it works impressively well. The detection is accurate, picking up studs consistently in different areas of my walls. It’s lightweight, easy to hold, and simple to use—just power it on, run it along the wall, and it gives clear indications when a stud is found.I haven’t used it for a full project yet, but in my initial tests, it performed reliably. It also seems to work through drywall without false readings, which is a big plus. If you’re looking for a dependable and user-friendly stud finder, I’d definitely recommend this one.
C. O.
Reviewed in the United States on September 7, 2024
Nice that it really shows the center of the stud quite well, but at times, it seems to miss a stud or two along a wall....not sure if it's electrical lines and plumbing that are issues, but adjusting vertical a bit seems to fix it. So far, probably the best stud finder I have used, as all are not perfect. I do recommend.
me
Reviewed in the United States on August 17, 2024
In the Stud mode, the scanner continued to flash CAL (Calibrate). Instructions say "Note: In cases of the screen "CAL" icon flashes and the buzzer alerts when moving the device, it may be incorrectly calibrated, please move the device to a different position to re-calibrate." That made no difference. But then I found where the instructions say "Note: It is important to wait for the calibration completed (2-3 seconds) every time before moving the device." That did work, but it takes a few more seconds than that.It gives different results on stud location when I keep passing over the same area. I only use 1-1/2" mode to identify studs, and it rarely indicates the EDGE of the stud, but usually indicates just the CENTER location (which doesn't bother me as long as it's accurate). Instructions say "Hold the device steady, parallel to the studs, and do not rotate the device". But the purpose of the device is to identify studs, so holding it parallel to vertical studs that you know are present is one thing, but what about cross-studs (between the vertical studs) that are horizontal and usually halfway up the wall? Later I slid it across a wall where I already know the stud locations (every 16”) and it identified studs every few inches instead.Then I used it in the METAL mode to identify the metal corner brace that runs up the outside corner of the wall, right under the surface, that I know is there because I saw it when the baseboard was removed. Instructions state that the tool continues to re-calibrate it's own sensitivity during metal scanning. I don't know how to translate that. I held the tool vertically as well as horizontally while slowly sliding it up the wall corner and the tool showed nothing. Later I tried it again and this time it sporadically showed metal when holding the tool vertically, and nothing when holding it horizontally.It just simply has no reliability.
Steven Wright
Reviewed in the United States on July 29, 2024
I recently purchased this stud finder, and I must say, it has exceeded my expectations. As a frequent DIY enthusiast, I have tried my fair share of stud finders over the years, but this one truly stands out.Accuracy: The accuracy of this stud finder is impressive. It quickly and accurately detects metal and wood studs behind walls, making my DIY projects a breeze. The audible beeps and LED indicators are highly effective in guiding me to the precise locations of the studs.Ease of use: This stud finder is incredibly user-friendly. Its sleek design and intuitive controls make it easy for anyone to use, regardless of their experience level. I appreciate the ergonomic handle, which allows for comfortable extended use during projects.Versatility: This stud finder is not limited to wood studs; it can also detect metal studs and pipes. This versatility has been invaluable in my home improvement projects, as my walls often have a mix of both.Speed: The scanning speed of this stud finder is impressive. I can quickly scan large areas of walls, saving me time and effort. This efficiency has made my projects more enjoyable and less tedious.Durability: The build quality of this stud finder is top-notch. It feels solid and well-constructed, giving me confidence in its durability. I have dropped it a few times during use, and it has held up exceptionally well, without any damage to the device or its functionality.In conclusion, I highly recommend this stud finder to anyone in need of an accurate, user-friendly, and versatile device for their DIY projects. It has made my life easier and my projects more efficient, and I am confident it will do the same for you. Five stars, without a doubt!
Jeff J
Reviewed in the United States on December 6, 2024
I needed to hang a 20 feet ladder on the wall in my garage. This stud finder has performed amazingly and has completely exceeded my expectations. First, I had never used Stud Finder, and this was my first time. I am so happy that I could accurately and effortlessly locate the exact position of studs behind the walls with this Stud Finder. The user interface is very straightforward and the clear display and audio indicators make it easy to use. It is worth every penny for it. I would recommend this Stud Finder 100%.
Chunzhi zhang
Reviewed in the United States on December 18, 2024
I recently purchased the Stud Finder Wall Scanner, and I must say it’s been a great tool for my DIY projects. It makes finding studs much easier and more comfortable, especially compared to other methods. The device is user-friendly, and I appreciate the clear, small instruction manual that comes with it—perfect for first-time users.For the price, the quality is excellent. The scanner works accurately and consistently, providing reliable results every time. I was able to locate studs quickly and with minimal effort. Overall, I highly recommend this stud finder for anyone looking for a budget-friendly, effective tool for their home improvement tasks.
Michel Provencher
Reviewed in Canada on November 21, 2024
Good
Recommended Products